Initial Commit
Blank working project
This commit is contained in:
William Miceli
3776
Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
Normal file
3776
Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
Normal file
File diff suppressed because it is too large
Load Diff
298
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h
Normal file
298
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h
Normal file
@@ -0,0 +1,298 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the HAL
|
||||
* module driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_H
|
||||
#define __STM32F4xx_HAL_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_conf.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup HAL_Exported_Constants HAL Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_TICK_FREQ Tick Frequency
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_TICK_FREQ_10HZ = 100U,
|
||||
HAL_TICK_FREQ_100HZ = 10U,
|
||||
HAL_TICK_FREQ_1KHZ = 1U,
|
||||
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
|
||||
} HAL_TickFreqTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Freeze/Unfreeze Peripherals in Debug mode
|
||||
*/
|
||||
#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
|
||||
#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
|
||||
|
||||
/** @brief Main Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
|
||||
|
||||
/** @brief System Flash memory mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
|
||||
}while(0);
|
||||
|
||||
/** @brief Embedded SRAM mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
|
||||
/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
|
||||
}while(0);
|
||||
|
||||
/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
|
||||
*/
|
||||
#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
|
||||
SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
|
||||
}while(0);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
|
||||
* @{
|
||||
*/
|
||||
/** @brief SYSCFG Break Lockup lock
|
||||
* Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input
|
||||
* @note The selected configuration is locked and can be unlocked by system reset
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
|
||||
SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
|
||||
}while(0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PVD_Lock_Enable PVD Lock
|
||||
* @{
|
||||
*/
|
||||
/** @brief SYSCFG Break PVD lock
|
||||
* Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
|
||||
* @note The selected configuration is locked and can be unlocked by system reset
|
||||
*/
|
||||
#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
|
||||
SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
|
||||
}while(0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_Private_Macros HAL Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_100HZ) || \
|
||||
((FREQ) == HAL_TICK_FREQ_1KHZ))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported variables --------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern __IO uint32_t uwTick;
|
||||
extern uint32_t uwTickPrio;
|
||||
extern HAL_TickFreqTypeDef uwTickFreq;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup HAL_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup HAL_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and Configuration functions ******************************/
|
||||
HAL_StatusTypeDef HAL_Init(void);
|
||||
HAL_StatusTypeDef HAL_DeInit(void);
|
||||
void HAL_MspInit(void);
|
||||
void HAL_MspDeInit(void);
|
||||
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
void HAL_IncTick(void);
|
||||
void HAL_Delay(uint32_t Delay);
|
||||
uint32_t HAL_GetTick(void);
|
||||
uint32_t HAL_GetTickPrio(void);
|
||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
|
||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
|
||||
void HAL_SuspendTick(void);
|
||||
void HAL_ResumeTick(void);
|
||||
uint32_t HAL_GetHalVersion(void);
|
||||
uint32_t HAL_GetREVID(void);
|
||||
uint32_t HAL_GetDEVID(void);
|
||||
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStopMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStopMode(void);
|
||||
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
||||
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
||||
void HAL_EnableCompensationCell(void);
|
||||
void HAL_DisableCompensationCell(void);
|
||||
uint32_t HAL_GetUIDw0(void);
|
||||
uint32_t HAL_GetUIDw1(void);
|
||||
uint32_t HAL_GetUIDw2(void);
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
void HAL_EnableMemorySwappingBank(void);
|
||||
void HAL_DisableMemorySwappingBank(void);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Variables HAL Private Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup HAL_Private_Constants HAL Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
410
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h
Normal file
410
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h
Normal file
@@ -0,0 +1,410 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CORTEX_H
|
||||
#define __STM32F4xx_HAL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX
|
||||
* @{
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Exported_Types Cortex Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
|
||||
* @brief MPU Region initialization structure
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Enable; /*!< Specifies the status of the region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
|
||||
uint8_t Number; /*!< Specifies the number of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
|
||||
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
|
||||
uint8_t Size; /*!< Specifies the size of the region to protect.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
|
||||
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
||||
uint8_t TypeExtField; /*!< Specifies the TEX field level.
|
||||
This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
|
||||
uint8_t AccessPermission; /*!< Specifies the region access permission type.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
|
||||
uint8_t DisableExec; /*!< Specifies the instruction access status.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
|
||||
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
|
||||
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
|
||||
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
|
||||
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
|
||||
}MPU_Region_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
|
||||
* @{
|
||||
*/
|
||||
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
|
||||
4 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
|
||||
3 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
|
||||
2 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
|
||||
1 bits for subpriority */
|
||||
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
|
||||
0 bits for subpriority */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
|
||||
* @{
|
||||
*/
|
||||
#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U
|
||||
#define SYSTICK_CLKSOURCE_HCLK 0x00000004U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (__MPU_PRESENT == 1)
|
||||
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
|
||||
* @{
|
||||
*/
|
||||
#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U
|
||||
#define MPU_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk
|
||||
#define MPU_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk
|
||||
#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_ENABLE ((uint8_t)0x01)
|
||||
#define MPU_REGION_DISABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
|
||||
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
|
||||
* @{
|
||||
*/
|
||||
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
|
||||
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
|
||||
* @{
|
||||
*/
|
||||
#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
|
||||
#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
|
||||
#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
|
||||
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
|
||||
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
|
||||
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
|
||||
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
|
||||
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
|
||||
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
|
||||
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
|
||||
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
|
||||
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
|
||||
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
|
||||
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
|
||||
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
|
||||
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
|
||||
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
|
||||
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
|
||||
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
|
||||
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
|
||||
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
|
||||
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
|
||||
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
|
||||
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
|
||||
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
|
||||
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
|
||||
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
|
||||
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
|
||||
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
|
||||
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
|
||||
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
|
||||
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
|
||||
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
|
||||
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
|
||||
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
|
||||
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
|
||||
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
|
||||
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
|
||||
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
|
||||
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
|
||||
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
|
||||
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported Macros -----------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CORTEX_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
|
||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
|
||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SystemReset(void);
|
||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CORTEX_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
uint32_t HAL_NVIC_GetPriorityGrouping(void);
|
||||
void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
|
||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
|
||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
|
||||
uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
|
||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
|
||||
void HAL_SYSTICK_IRQHandler(void);
|
||||
void HAL_SYSTICK_Callback(void);
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
void HAL_MPU_Enable(uint32_t MPU_Control);
|
||||
void HAL_MPU_Disable(void);
|
||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_1) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_2) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_3) || \
|
||||
((GROUP) == NVIC_PRIORITYGROUP_4))
|
||||
|
||||
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10U)
|
||||
|
||||
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= (IRQn_Type)0x00U)
|
||||
|
||||
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
|
||||
((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
|
||||
|
||||
#if (__MPU_PRESENT == 1U)
|
||||
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
|
||||
((STATE) == MPU_REGION_DISABLE))
|
||||
|
||||
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
|
||||
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
|
||||
|
||||
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
|
||||
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
|
||||
|
||||
#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
|
||||
((TYPE) == MPU_TEX_LEVEL1) || \
|
||||
((TYPE) == MPU_TEX_LEVEL2))
|
||||
|
||||
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
|
||||
((TYPE) == MPU_REGION_FULL_ACCESS) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO) || \
|
||||
((TYPE) == MPU_REGION_PRIV_RO_URO))
|
||||
|
||||
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER1) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER2) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER3) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER4) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER5) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER6) || \
|
||||
((NUMBER) == MPU_REGION_NUMBER7))
|
||||
|
||||
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512B) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512KB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_8MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_16MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_32MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_64MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_128MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_256MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_512MB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_1GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_2GB) || \
|
||||
((SIZE) == MPU_REGION_SIZE_4GB))
|
||||
|
||||
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
|
||||
#endif /* __MPU_PRESENT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CORTEX_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
184
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h
Normal file
184
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h
Normal file
@@ -0,0 +1,184 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_crc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CRC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_CRC_H
|
||||
#define STM32F4xx_HAL_CRC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CRC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Types CRC Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief CRC HAL State Structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */
|
||||
HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */
|
||||
HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */
|
||||
HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */
|
||||
HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */
|
||||
} HAL_CRC_StateTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief CRC Handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
CRC_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< CRC Locking object */
|
||||
|
||||
__IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
|
||||
|
||||
} CRC_HandleTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Constants CRC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Macros CRC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset CRC handle state.
|
||||
* @param __HANDLE__ CRC handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Reset CRC Data Register.
|
||||
* @param __HANDLE__ CRC handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
|
||||
|
||||
/**
|
||||
* @brief Store data in the Independent Data (ID) register.
|
||||
* @param __HANDLE__ CRC handle
|
||||
* @param __VALUE__ Value to be stored in the ID register
|
||||
* @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
|
||||
|
||||
/**
|
||||
* @brief Return the data stored in the Independent Data (ID) register.
|
||||
* @param __HANDLE__ CRC handle
|
||||
* @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
|
||||
* @retval Value of the ID register
|
||||
*/
|
||||
#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Private macros --------------------------------------------------------*/
|
||||
/** @defgroup CRC_Private_Macros CRC Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CRC_Exported_Functions CRC Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions ****************************/
|
||||
/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
|
||||
HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc);
|
||||
void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
|
||||
void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
|
||||
uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Peripheral State and Error functions ***************************************/
|
||||
/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_HAL_CRC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
197
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h
Normal file
197
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h
Normal file
@@ -0,0 +1,197 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_def.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains HAL common defines, enumeration, macros and
|
||||
* structures definitions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_DEF
|
||||
#define __STM32F4xx_HAL_DEF
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
#include "Legacy/stm32_hal_legacy.h"
|
||||
#include <stddef.h>
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief HAL Status structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_OK = 0x00U,
|
||||
HAL_ERROR = 0x01U,
|
||||
HAL_BUSY = 0x02U,
|
||||
HAL_TIMEOUT = 0x03U
|
||||
} HAL_StatusTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL Lock structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UNLOCKED = 0x00U,
|
||||
HAL_LOCKED = 0x01U
|
||||
} HAL_LockTypeDef;
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
|
||||
|
||||
#define HAL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
|
||||
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
|
||||
|
||||
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
|
||||
(__DMA_HANDLE__).Parent = (__HANDLE__); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Reset the Handle's State field.
|
||||
* @param __HANDLE__ specifies the Peripheral Handle.
|
||||
* @note This macro can be used for the following purpose:
|
||||
* - When the Handle is declared as local variable; before passing it as parameter
|
||||
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
|
||||
* to set to 0 the Handle's "State" field.
|
||||
* Otherwise, "State" field may have any random value and the first time the function
|
||||
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
|
||||
* (i.e. HAL_PPP_MspInit() will not be executed).
|
||||
* - When there is a need to reconfigure the low level hardware: instead of calling
|
||||
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
|
||||
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
|
||||
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
|
||||
|
||||
#if (USE_RTOS == 1U)
|
||||
/* Reserved for future use */
|
||||
#error "USE_RTOS should be 0 in the current HAL release"
|
||||
#else
|
||||
#define __HAL_LOCK(__HANDLE__) \
|
||||
do{ \
|
||||
if((__HANDLE__)->Lock == HAL_LOCKED) \
|
||||
{ \
|
||||
return HAL_BUSY; \
|
||||
} \
|
||||
else \
|
||||
{ \
|
||||
(__HANDLE__)->Lock = HAL_LOCKED; \
|
||||
} \
|
||||
}while (0U)
|
||||
|
||||
#define __HAL_UNLOCK(__HANDLE__) \
|
||||
do{ \
|
||||
(__HANDLE__)->Lock = HAL_UNLOCKED; \
|
||||
}while (0U)
|
||||
#endif /* USE_RTOS */
|
||||
|
||||
#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __weak
|
||||
#define __weak __attribute__((weak))
|
||||
#endif /* __weak */
|
||||
#ifndef __packed
|
||||
#define __packed __attribute__((__packed__))
|
||||
#endif /* __packed */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
|
||||
#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#else
|
||||
#ifndef __ALIGN_END
|
||||
#define __ALIGN_END
|
||||
#endif /* __ALIGN_END */
|
||||
#ifndef __ALIGN_BEGIN
|
||||
#if defined (__CC_ARM) /* ARM Compiler */
|
||||
#define __ALIGN_BEGIN __align(4)
|
||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
||||
#define __ALIGN_BEGIN
|
||||
#endif /* __CC_ARM */
|
||||
#endif /* __ALIGN_BEGIN */
|
||||
#endif /* __GNUC__ */
|
||||
|
||||
|
||||
/**
|
||||
* @brief __RAM_FUNC definition
|
||||
*/
|
||||
#if defined ( __CC_ARM )
|
||||
/* ARM Compiler
|
||||
------------
|
||||
RAM functions are defined using the toolchain options.
|
||||
Functions that are executed in RAM should reside in a separate source module.
|
||||
Using the 'Options for File' dialog you can simply change the 'Code / Const'
|
||||
area of a module to a memory space in physical RAM.
|
||||
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
|
||||
dialog.
|
||||
*/
|
||||
#define __RAM_FUNC
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
RAM functions are defined using a specific toolchain keyword "__ramfunc".
|
||||
*/
|
||||
#define __RAM_FUNC __ramfunc
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
/* GNU Compiler
|
||||
------------
|
||||
RAM functions are defined using a specific toolchain attribute
|
||||
"__attribute__((section(".RamFunc")))".
|
||||
*/
|
||||
#define __RAM_FUNC __attribute__((section(".RamFunc")))
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief __NOINLINE definition
|
||||
*/
|
||||
#if defined ( __CC_ARM ) || defined ( __GNUC__ )
|
||||
/* ARM & GNUCompiler
|
||||
----------------
|
||||
*/
|
||||
#define __NOINLINE __attribute__ ( (noinline) )
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
/* ICCARM Compiler
|
||||
---------------
|
||||
*/
|
||||
#define __NOINLINE _Pragma("optimize = no_inline")
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* ___STM32F4xx_HAL_DEF */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
804
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h
Normal file
804
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h
Normal file
@@ -0,0 +1,804 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_dma.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_DMA_H
|
||||
#define __STM32F4xx_HAL_DMA_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Types DMA Exported Types
|
||||
* @brief DMA Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief DMA Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Channel; /*!< Specifies the channel used for the specified stream.
|
||||
This parameter can be a value of @ref DMA_Channel_selection */
|
||||
|
||||
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
|
||||
from memory to memory or from peripheral to memory.
|
||||
This parameter can be a value of @ref DMA_Data_transfer_direction */
|
||||
|
||||
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
|
||||
|
||||
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
|
||||
This parameter can be a value of @ref DMA_Memory_incremented_mode */
|
||||
|
||||
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
|
||||
This parameter can be a value of @ref DMA_Peripheral_data_size */
|
||||
|
||||
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
|
||||
This parameter can be a value of @ref DMA_Memory_data_size */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_mode
|
||||
@note The circular buffer mode cannot be used if the memory-to-memory
|
||||
data transfer is configured on the selected Stream */
|
||||
|
||||
uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
|
||||
This parameter can be a value of @ref DMA_Priority_level */
|
||||
|
||||
uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
|
||||
This parameter can be a value of @ref DMA_FIFO_direct_mode
|
||||
@note The Direct mode (FIFO mode disabled) cannot be used if the
|
||||
memory-to-memory data transfer is configured on the selected stream */
|
||||
|
||||
uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
|
||||
This parameter can be a value of @ref DMA_FIFO_threshold_level */
|
||||
|
||||
uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Memory_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
|
||||
uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
|
||||
It specifies the amount of data to be transferred in a single non interruptible
|
||||
transaction.
|
||||
This parameter can be a value of @ref DMA_Peripheral_burst
|
||||
@note The burst mode is possible only if the address Increment mode is enabled. */
|
||||
}DMA_InitTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief HAL DMA State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
|
||||
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
|
||||
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
|
||||
HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
|
||||
HAL_DMA_STATE_ERROR = 0x04U, /*!< DMA error state */
|
||||
HAL_DMA_STATE_ABORT = 0x05U, /*!< DMA Abort state */
|
||||
}HAL_DMA_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
|
||||
}HAL_DMA_LevelCompleteTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Error Code structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
|
||||
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */
|
||||
HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */
|
||||
HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */
|
||||
HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */
|
||||
HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */
|
||||
HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */
|
||||
}HAL_DMA_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA handle Structure definition
|
||||
*/
|
||||
typedef struct __DMA_HandleTypeDef
|
||||
{
|
||||
DMA_Stream_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
DMA_InitTypeDef Init; /*!< DMA communication parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DMA locking object */
|
||||
|
||||
__IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
|
||||
|
||||
void *Parent; /*!< Parent object state */
|
||||
|
||||
void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
|
||||
|
||||
void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
|
||||
|
||||
void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
|
||||
|
||||
void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */
|
||||
|
||||
void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
|
||||
|
||||
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DMA Error code */
|
||||
|
||||
uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */
|
||||
|
||||
uint32_t StreamIndex; /*!< DMA Stream Index */
|
||||
|
||||
}DMA_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
||||
* @brief DMA Exported constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Error_Code DMA Error Code
|
||||
* @brief DMA Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
|
||||
#define HAL_DMA_ERROR_FE 0x00000002U /*!< FIFO error */
|
||||
#define HAL_DMA_ERROR_DME 0x00000004U /*!< Direct Mode error */
|
||||
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
||||
#define HAL_DMA_ERROR_PARAM 0x00000040U /*!< Parameter error */
|
||||
#define HAL_DMA_ERROR_NO_XFER 0x00000080U /*!< Abort requested with no Xfer ongoing */
|
||||
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Channel_selection DMA Channel selection
|
||||
* @brief DMA channel selection
|
||||
* @{
|
||||
*/
|
||||
#define DMA_CHANNEL_0 0x00000000U /*!< DMA Channel 0 */
|
||||
#define DMA_CHANNEL_1 0x02000000U /*!< DMA Channel 1 */
|
||||
#define DMA_CHANNEL_2 0x04000000U /*!< DMA Channel 2 */
|
||||
#define DMA_CHANNEL_3 0x06000000U /*!< DMA Channel 3 */
|
||||
#define DMA_CHANNEL_4 0x08000000U /*!< DMA Channel 4 */
|
||||
#define DMA_CHANNEL_5 0x0A000000U /*!< DMA Channel 5 */
|
||||
#define DMA_CHANNEL_6 0x0C000000U /*!< DMA Channel 6 */
|
||||
#define DMA_CHANNEL_7 0x0E000000U /*!< DMA Channel 7 */
|
||||
#if defined (DMA_SxCR_CHSEL_3)
|
||||
#define DMA_CHANNEL_8 0x10000000U /*!< DMA Channel 8 */
|
||||
#define DMA_CHANNEL_9 0x12000000U /*!< DMA Channel 9 */
|
||||
#define DMA_CHANNEL_10 0x14000000U /*!< DMA Channel 10 */
|
||||
#define DMA_CHANNEL_11 0x16000000U /*!< DMA Channel 11 */
|
||||
#define DMA_CHANNEL_12 0x18000000U /*!< DMA Channel 12 */
|
||||
#define DMA_CHANNEL_13 0x1A000000U /*!< DMA Channel 13 */
|
||||
#define DMA_CHANNEL_14 0x1C000000U /*!< DMA Channel 14 */
|
||||
#define DMA_CHANNEL_15 0x1E000000U /*!< DMA Channel 15 */
|
||||
#endif /* DMA_SxCR_CHSEL_3 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
|
||||
* @brief DMA data transfer direction
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
|
||||
#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */
|
||||
#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
|
||||
* @brief DMA peripheral incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */
|
||||
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
|
||||
* @brief DMA memory incremented mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */
|
||||
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode disable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
|
||||
* @brief DMA peripheral data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */
|
||||
#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
|
||||
#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_data_size DMA Memory data size
|
||||
* @brief DMA memory data size
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */
|
||||
#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
|
||||
#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_mode DMA mode
|
||||
* @brief DMA mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
|
||||
#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */
|
||||
#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Priority_level DMA Priority level
|
||||
* @brief DMA priority levels
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level: Low */
|
||||
#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */
|
||||
#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */
|
||||
#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
|
||||
* @brief DMA FIFO direct mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */
|
||||
#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
|
||||
* @brief DMA FIFO level
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FIFO_THRESHOLD_1QUARTERFULL 0x00000000U /*!< FIFO threshold 1 quart full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */
|
||||
#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Memory_burst DMA Memory burst
|
||||
* @brief DMA memory burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_MBURST_SINGLE 0x00000000U
|
||||
#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0)
|
||||
#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1)
|
||||
#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
|
||||
* @brief DMA peripheral burst
|
||||
* @{
|
||||
*/
|
||||
#define DMA_PBURST_SINGLE 0x00000000U
|
||||
#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0)
|
||||
#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1)
|
||||
#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
|
||||
* @brief DMA interrupts definition
|
||||
* @{
|
||||
*/
|
||||
#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE)
|
||||
#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE)
|
||||
#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE)
|
||||
#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE)
|
||||
#define DMA_IT_FE 0x00000080U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_flag_definitions DMA flag definitions
|
||||
* @brief DMA flag definitions
|
||||
* @{
|
||||
*/
|
||||
#define DMA_FLAG_FEIF0_4 0x00000001U
|
||||
#define DMA_FLAG_DMEIF0_4 0x00000004U
|
||||
#define DMA_FLAG_TEIF0_4 0x00000008U
|
||||
#define DMA_FLAG_HTIF0_4 0x00000010U
|
||||
#define DMA_FLAG_TCIF0_4 0x00000020U
|
||||
#define DMA_FLAG_FEIF1_5 0x00000040U
|
||||
#define DMA_FLAG_DMEIF1_5 0x00000100U
|
||||
#define DMA_FLAG_TEIF1_5 0x00000200U
|
||||
#define DMA_FLAG_HTIF1_5 0x00000400U
|
||||
#define DMA_FLAG_TCIF1_5 0x00000800U
|
||||
#define DMA_FLAG_FEIF2_6 0x00010000U
|
||||
#define DMA_FLAG_DMEIF2_6 0x00040000U
|
||||
#define DMA_FLAG_TEIF2_6 0x00080000U
|
||||
#define DMA_FLAG_HTIF2_6 0x00100000U
|
||||
#define DMA_FLAG_TCIF2_6 0x00200000U
|
||||
#define DMA_FLAG_FEIF3_7 0x00400000U
|
||||
#define DMA_FLAG_DMEIF3_7 0x01000000U
|
||||
#define DMA_FLAG_TEIF3_7 0x02000000U
|
||||
#define DMA_FLAG_HTIF3_7 0x04000000U
|
||||
#define DMA_FLAG_TCIF3_7 0x08000000U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/** @brief Reset DMA handle state
|
||||
* @param __HANDLE__ specifies the DMA handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO filled level.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The FIFO filling state.
|
||||
* - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
|
||||
* and not empty.
|
||||
* - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
|
||||
* - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
|
||||
* - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
|
||||
* - DMA_FIFOStatus_Empty: when FIFO is empty
|
||||
* - DMA_FIFOStatus_Full: when FIFO is full
|
||||
*/
|
||||
#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
|
||||
DMA_FLAG_TCIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream half transfer complete flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified half transfer complete flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
|
||||
DMA_FLAG_HTIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream transfer error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified transfer error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
|
||||
DMA_FLAG_TEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream FIFO error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified FIFO error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
|
||||
DMA_FLAG_FEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Return the current DMA Stream direct mode error flag.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @retval The specified direct mode error flag index.
|
||||
*/
|
||||
#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
|
||||
DMA_FLAG_DMEIF3_7)
|
||||
|
||||
/**
|
||||
* @brief Get the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ Get the specified flag.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the DMA Stream pending flags.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag.
|
||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag.
|
||||
* @arg DMA_FLAG_TEIFx: Transfer error flag.
|
||||
* @arg DMA_FLAG_DMEIFx: Direct mode error flag.
|
||||
* @arg DMA_FLAG_FEIFx: FIFO error flag.
|
||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
|
||||
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
|
||||
((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA Stream interrupts.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified DMA Stream interrupt is enabled or disabled.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __INTERRUPT__ specifies the DMA interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA_IT_TC: Transfer complete interrupt mask.
|
||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask.
|
||||
* @arg DMA_IT_TE: Transfer error interrupt mask.
|
||||
* @arg DMA_IT_FE: FIFO error interrupt mask.
|
||||
* @arg DMA_IT_DME: Direct mode error interrupt.
|
||||
* @retval The state of DMA_IT.
|
||||
*/
|
||||
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
|
||||
((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
|
||||
((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
|
||||
|
||||
/**
|
||||
* @brief Writes the number of data units to be transferred on the DMA Stream.
|
||||
* @param __HANDLE__ DMA handle
|
||||
* @param __COUNTER__ Number of data units to be transferred (from 0 to 65535)
|
||||
* Number of data items depends only on the Peripheral data format.
|
||||
*
|
||||
* @note If Peripheral data format is Bytes: number of data units is equal
|
||||
* to total number of bytes to be transferred.
|
||||
*
|
||||
* @note If Peripheral data format is Half-Word: number of data units is
|
||||
* equal to total number of bytes to be transferred / 2.
|
||||
*
|
||||
* @note If Peripheral data format is Word: number of data units is equal
|
||||
* to total number of bytes to be transferred / 4.
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMAy Streamx transfer.
|
||||
*/
|
||||
#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
|
||||
|
||||
/**
|
||||
* @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
|
||||
* @param __HANDLE__ DMA handle
|
||||
*
|
||||
* @retval The number of remaining data units in the current DMA Stream transfer.
|
||||
*/
|
||||
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
|
||||
|
||||
|
||||
/* Include DMA HAL Extension module */
|
||||
#include "stm32f4xx_hal_dma_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions DMA Exported Functions
|
||||
* @brief DMA Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
|
||||
* @brief I/O operation functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
|
||||
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_CleanCallbacks(DMA_HandleTypeDef *hdma);
|
||||
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma));
|
||||
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
|
||||
* @brief Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
|
||||
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private Constants -------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Constants DMA Private Constants
|
||||
* @brief DMA private defines and constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Macros DMA Private Macros
|
||||
* @brief DMA private macros
|
||||
* @{
|
||||
*/
|
||||
#if defined (DMA_SxCR_CHSEL_3)
|
||||
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
|
||||
((CHANNEL) == DMA_CHANNEL_1) || \
|
||||
((CHANNEL) == DMA_CHANNEL_2) || \
|
||||
((CHANNEL) == DMA_CHANNEL_3) || \
|
||||
((CHANNEL) == DMA_CHANNEL_4) || \
|
||||
((CHANNEL) == DMA_CHANNEL_5) || \
|
||||
((CHANNEL) == DMA_CHANNEL_6) || \
|
||||
((CHANNEL) == DMA_CHANNEL_7) || \
|
||||
((CHANNEL) == DMA_CHANNEL_8) || \
|
||||
((CHANNEL) == DMA_CHANNEL_9) || \
|
||||
((CHANNEL) == DMA_CHANNEL_10)|| \
|
||||
((CHANNEL) == DMA_CHANNEL_11)|| \
|
||||
((CHANNEL) == DMA_CHANNEL_12)|| \
|
||||
((CHANNEL) == DMA_CHANNEL_13)|| \
|
||||
((CHANNEL) == DMA_CHANNEL_14)|| \
|
||||
((CHANNEL) == DMA_CHANNEL_15))
|
||||
#else
|
||||
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
|
||||
((CHANNEL) == DMA_CHANNEL_1) || \
|
||||
((CHANNEL) == DMA_CHANNEL_2) || \
|
||||
((CHANNEL) == DMA_CHANNEL_3) || \
|
||||
((CHANNEL) == DMA_CHANNEL_4) || \
|
||||
((CHANNEL) == DMA_CHANNEL_5) || \
|
||||
((CHANNEL) == DMA_CHANNEL_6) || \
|
||||
((CHANNEL) == DMA_CHANNEL_7))
|
||||
#endif /* DMA_SxCR_CHSEL_3 */
|
||||
|
||||
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
|
||||
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
|
||||
|
||||
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
|
||||
((STATE) == DMA_PINC_DISABLE))
|
||||
|
||||
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
|
||||
((STATE) == DMA_MINC_DISABLE))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_PDATAALIGN_WORD))
|
||||
|
||||
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
|
||||
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
|
||||
((SIZE) == DMA_MDATAALIGN_WORD ))
|
||||
|
||||
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
|
||||
((MODE) == DMA_CIRCULAR) || \
|
||||
((MODE) == DMA_PFCTRL))
|
||||
|
||||
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
|
||||
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
|
||||
((PRIORITY) == DMA_PRIORITY_HIGH) || \
|
||||
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
|
||||
|
||||
#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
|
||||
((STATE) == DMA_FIFOMODE_ENABLE))
|
||||
|
||||
#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
|
||||
((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
|
||||
|
||||
#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
|
||||
((BURST) == DMA_MBURST_INC4) || \
|
||||
((BURST) == DMA_MBURST_INC8) || \
|
||||
((BURST) == DMA_MBURST_INC16))
|
||||
|
||||
#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
|
||||
((BURST) == DMA_PBURST_INC4) || \
|
||||
((BURST) == DMA_PBURST_INC8) || \
|
||||
((BURST) == DMA_PBURST_INC16))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMA_Private_Functions DMA Private Functions
|
||||
* @brief DMA private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_DMA_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
630
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h
Normal file
630
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h
Normal file
@@ -0,0 +1,630 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_dma2d.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA2D HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_DMA2D_H
|
||||
#define STM32F4xx_HAL_DMA2D_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (DMA2D)
|
||||
|
||||
/** @addtogroup DMA2D DMA2D
|
||||
* @brief DMA2D HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
|
||||
* @{
|
||||
*/
|
||||
#define MAX_DMA2D_LAYER 2U /*!< DMA2D maximum number of layers */
|
||||
|
||||
/**
|
||||
* @brief DMA2D CLUT Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
|
||||
|
||||
uint32_t CLUTColorMode; /*!< Configures the DMA2D CLUT color mode.
|
||||
This parameter can be one value of @ref DMA2D_CLUT_CM. */
|
||||
|
||||
uint32_t Size; /*!< Configures the DMA2D CLUT size.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
|
||||
} DMA2D_CLUTCfgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA2D Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Mode; /*!< Configures the DMA2D transfer mode.
|
||||
This parameter can be one value of @ref DMA2D_Mode. */
|
||||
|
||||
uint32_t ColorMode; /*!< Configures the color format of the output image.
|
||||
This parameter can be one value of @ref DMA2D_Output_Color_Mode. */
|
||||
|
||||
uint32_t OutputOffset; /*!< Specifies the Offset value.
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
|
||||
|
||||
|
||||
|
||||
|
||||
} DMA2D_InitTypeDef;
|
||||
|
||||
|
||||
/**
|
||||
* @brief DMA2D Layer structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t InputOffset; /*!< Configures the DMA2D foreground or background offset.
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
|
||||
|
||||
uint32_t InputColorMode; /*!< Configures the DMA2D foreground or background color mode.
|
||||
This parameter can be one value of @ref DMA2D_Input_Color_Mode. */
|
||||
|
||||
uint32_t AlphaMode; /*!< Configures the DMA2D foreground or background alpha mode.
|
||||
This parameter can be one value of @ref DMA2D_Alpha_Mode. */
|
||||
|
||||
uint32_t InputAlpha; /*!< Specifies the DMA2D foreground or background alpha value and color value in case of A8 or A4 color mode.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF except for the color modes detailed below.
|
||||
@note In case of A8 or A4 color mode (ARGB), this parameter must be a number between
|
||||
Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where
|
||||
- InputAlpha[24:31] is the alpha value ALPHA[0:7]
|
||||
- InputAlpha[16:23] is the red value RED[0:7]
|
||||
- InputAlpha[8:15] is the green value GREEN[0:7]
|
||||
- InputAlpha[0:7] is the blue value BLUE[0:7]. */
|
||||
|
||||
|
||||
} DMA2D_LayerCfgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL DMA2D State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA2D_STATE_RESET = 0x00U, /*!< DMA2D not yet initialized or disabled */
|
||||
HAL_DMA2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_DMA2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
|
||||
HAL_DMA2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
|
||||
HAL_DMA2D_STATE_ERROR = 0x04U, /*!< DMA2D state error */
|
||||
HAL_DMA2D_STATE_SUSPEND = 0x05U /*!< DMA2D process is suspended */
|
||||
}HAL_DMA2D_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief DMA2D handle Structure definition
|
||||
*/
|
||||
typedef struct __DMA2D_HandleTypeDef
|
||||
{
|
||||
DMA2D_TypeDef *Instance; /*!< DMA2D register base address. */
|
||||
|
||||
DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters. */
|
||||
|
||||
void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback. */
|
||||
|
||||
void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback. */
|
||||
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
void (* LineEventCallback)( struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D line event callback. */
|
||||
|
||||
void (* CLUTLoadingCpltCallback)( struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D CLUT loading completion callback. */
|
||||
|
||||
void (* MspInitCallback)( struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D Msp Init callback. */
|
||||
|
||||
void (* MspDeInitCallback)( struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D Msp DeInit callback. */
|
||||
|
||||
#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */
|
||||
|
||||
DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< DMA2D lock. */
|
||||
|
||||
__IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state. */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< DMA2D error code. */
|
||||
} DMA2D_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL DMA2D Callback pointer definition
|
||||
*/
|
||||
typedef void (*pDMA2D_CallbackTypeDef)(DMA2D_HandleTypeDef * hdma2d); /*!< Pointer to a DMA2D common callback function */
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Error_Code DMA2D Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DMA2D_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_DMA2D_ERROR_TE 0x00000001U /*!< Transfer error */
|
||||
#define HAL_DMA2D_ERROR_CE 0x00000002U /*!< Configuration error */
|
||||
#define HAL_DMA2D_ERROR_CAE 0x00000004U /*!< CLUT access error */
|
||||
#define HAL_DMA2D_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_DMA2D_ERROR_INVALID_CALLBACK 0x00000040U /*!< Invalid callback error */
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Mode DMA2D Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */
|
||||
#define DMA2D_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */
|
||||
#define DMA2D_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */
|
||||
#define DMA2D_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_OUTPUT_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */
|
||||
#define DMA2D_OUTPUT_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 DMA2D color mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_INPUT_ARGB8888 0x00000000U /*!< ARGB8888 color mode */
|
||||
#define DMA2D_INPUT_RGB888 0x00000001U /*!< RGB888 color mode */
|
||||
#define DMA2D_INPUT_RGB565 0x00000002U /*!< RGB565 color mode */
|
||||
#define DMA2D_INPUT_ARGB1555 0x00000003U /*!< ARGB1555 color mode */
|
||||
#define DMA2D_INPUT_ARGB4444 0x00000004U /*!< ARGB4444 color mode */
|
||||
#define DMA2D_INPUT_L8 0x00000005U /*!< L8 color mode */
|
||||
#define DMA2D_INPUT_AL44 0x00000006U /*!< AL44 color mode */
|
||||
#define DMA2D_INPUT_AL88 0x00000007U /*!< AL88 color mode */
|
||||
#define DMA2D_INPUT_L4 0x00000008U /*!< L4 color mode */
|
||||
#define DMA2D_INPUT_A8 0x00000009U /*!< A8 color mode */
|
||||
#define DMA2D_INPUT_A4 0x0000000AU /*!< A4 color mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_NO_MODIF_ALPHA 0x00000000U /*!< No modification of the alpha channel value */
|
||||
#define DMA2D_REPLACE_ALPHA 0x00000001U /*!< Replace original alpha channel value by programmed alpha value */
|
||||
#define DMA2D_COMBINE_ALPHA 0x00000002U /*!< Replace original alpha channel value by programmed alpha value
|
||||
with original alpha channel value */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_CCM_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D CLUT color mode */
|
||||
#define DMA2D_CCM_RGB888 0x00000001U /*!< RGB888 DMA2D CLUT color mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Interrupts DMA2D Interrupts
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
|
||||
#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */
|
||||
#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */
|
||||
#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
|
||||
#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
|
||||
#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Flags DMA2D Flags
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
|
||||
#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */
|
||||
#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */
|
||||
#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
|
||||
#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
|
||||
#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Aliases DMA2D API Aliases
|
||||
* @{
|
||||
*/
|
||||
#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort for compatibility with legacy code */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL DMA2D common Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_DMA2D_MSPINIT_CB_ID = 0x00U, /*!< DMA2D MspInit callback ID */
|
||||
HAL_DMA2D_MSPDEINIT_CB_ID = 0x01U, /*!< DMA2D MspDeInit callback ID */
|
||||
HAL_DMA2D_TRANSFERCOMPLETE_CB_ID = 0x02U, /*!< DMA2D transfer complete callback ID */
|
||||
HAL_DMA2D_TRANSFERERROR_CB_ID = 0x03U, /*!< DMA2D transfer error callback ID */
|
||||
HAL_DMA2D_LINEEVENT_CB_ID = 0x04U, /*!< DMA2D line event callback ID */
|
||||
HAL_DMA2D_CLUTLOADINGCPLT_CB_ID = 0x05U, /*!< DMA2D CLUT loading completion callback ID */
|
||||
}HAL_DMA2D_CallbackIDTypeDef;
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset DMA2D handle state
|
||||
* @param __HANDLE__ specifies the DMA2D handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_DMA2D_STATE_RESET;\
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
}while(0)
|
||||
#else
|
||||
#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
/**
|
||||
* @brief Enable the DMA2D.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
|
||||
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
/**
|
||||
* @brief Get the DMA2D pending flags.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __FLAG__ flag to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_FLAG_CE: Configuration error flag
|
||||
* @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
|
||||
* @arg DMA2D_FLAG_CAE: CLUT access error flag
|
||||
* @arg DMA2D_FLAG_TW: Transfer Watermark flag
|
||||
* @arg DMA2D_FLAG_TC: Transfer complete flag
|
||||
* @arg DMA2D_FLAG_TE: Transfer error flag
|
||||
* @retval The state of FLAG.
|
||||
*/
|
||||
#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clear the DMA2D pending flags.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_FLAG_CE: Configuration error flag
|
||||
* @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
|
||||
* @arg DMA2D_FLAG_CAE: CLUT access error flag
|
||||
* @arg DMA2D_FLAG_TW: Transfer Watermark flag
|
||||
* @arg DMA2D_FLAG_TC: Transfer complete flag
|
||||
* @arg DMA2D_FLAG_TE: Transfer error flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Enable the specified DMA2D interrupts.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_IT_CE: Configuration error interrupt mask
|
||||
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
|
||||
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
|
||||
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_TE: Transfer error interrupt mask
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified DMA2D interrupts.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg DMA2D_IT_CE: Configuration error interrupt mask
|
||||
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
|
||||
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
|
||||
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_TE: Transfer error interrupt mask
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified DMA2D interrupt source is enabled or not.
|
||||
* @param __HANDLE__ DMA2D handle
|
||||
* @param __INTERRUPT__ specifies the DMA2D interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg DMA2D_IT_CE: Configuration error interrupt mask
|
||||
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
|
||||
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
|
||||
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
|
||||
* @arg DMA2D_IT_TE: Transfer error interrupt mask
|
||||
* @retval The state of INTERRUPT source.
|
||||
*/
|
||||
#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization and de-initialization functions *******************************/
|
||||
HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
|
||||
void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
|
||||
void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID, pDMA2D_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
|
||||
void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
|
||||
void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d);
|
||||
void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Peripheral Control functions *************************************************/
|
||||
HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
|
||||
HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d);
|
||||
HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Peripheral State functions ***************************************************/
|
||||
HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
|
||||
uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_LINE_WATERMARK_MAX DMA2D_LWR_LW /*!< DMA2D maximum line watermark */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Color_Value DMA2D Color Value
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_COLOR_VALUE 0x000000FFU /*!< Color value mask */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_MAX_LAYER 2U /*!< DMA2D maximum number of layers */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Layers DMA2D Layers
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_BACKGROUND_LAYER 0x00000000U /*!< DMA2D Background Layer (layer 0) */
|
||||
#define DMA2D_FOREGROUND_LAYER 0x00000001U /*!< DMA2D Foreground Layer (layer 1) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Offset DMA2D Offset
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< maximum Line Offset */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_Size DMA2D Size
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16U) /*!< DMA2D maximum number of pixels per line */
|
||||
#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D maximum number of lines */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size
|
||||
* @{
|
||||
*/
|
||||
#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8U) /*!< DMA2D maximum CLUT size */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_DMA2D_LAYER(LAYER) (((LAYER) == DMA2D_BACKGROUND_LAYER) || ((LAYER) == DMA2D_FOREGROUND_LAYER))
|
||||
|
||||
#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
|
||||
((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
|
||||
|
||||
#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || ((MODE_ARGB) == DMA2D_OUTPUT_RGB888) || \
|
||||
((MODE_ARGB) == DMA2D_OUTPUT_RGB565) || ((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \
|
||||
((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444))
|
||||
|
||||
#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= DMA2D_COLOR_VALUE)
|
||||
#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
|
||||
#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
|
||||
#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
|
||||
|
||||
#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || ((INPUT_CM) == DMA2D_INPUT_RGB888) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_RGB565) || ((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_ARGB4444) || ((INPUT_CM) == DMA2D_INPUT_L8) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_AL44) || ((INPUT_CM) == DMA2D_INPUT_AL88) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_L4) || ((INPUT_CM) == DMA2D_INPUT_A8) || \
|
||||
((INPUT_CM) == DMA2D_INPUT_A4))
|
||||
|
||||
#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
|
||||
((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
|
||||
((AlphaMode) == DMA2D_COMBINE_ALPHA))
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
|
||||
#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
|
||||
#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX)
|
||||
#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
|
||||
((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
|
||||
((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
|
||||
#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
|
||||
((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
|
||||
((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined (DMA2D) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_HAL_DMA2D_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
104
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h
Normal file
104
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h
Normal file
@@ -0,0 +1,104 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_dma_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of DMA HAL extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_DMA_EX_H
|
||||
#define __STM32F4xx_HAL_DMA_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
|
||||
* @brief DMAEx Exported types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL DMA Memory definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
MEMORY0 = 0x00U, /*!< Memory 0 */
|
||||
MEMORY1 = 0x01U /*!< Memory 1 */
|
||||
}HAL_DMA_MemoryTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
|
||||
* @brief DMAEx Exported functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
|
||||
* @brief Extended features functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
|
||||
* @brief DMAEx Private functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__STM32F4xx_HAL_DMA_EX_H*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
1353
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dsi.h
Normal file
1353
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dsi.h
Normal file
File diff suppressed because it is too large
Load Diff
368
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h
Normal file
368
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_exti.h
Normal file
@@ -0,0 +1,368 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32f4xx_HAL_EXTI_H
|
||||
#define STM32f4xx_HAL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI EXTI
|
||||
* @brief EXTI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_EXTI_COMMON_CB_ID = 0x00U
|
||||
} EXTI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Handle structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< Exti line number */
|
||||
void (* PendingCallback)(void); /*!< Exti pending callback */
|
||||
} EXTI_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
||||
can be a value of @ref EXTI_Line */
|
||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
||||
This parameter can be a combination of @ref EXTI_Mode */
|
||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
||||
can be a value of @ref EXTI_Trigger */
|
||||
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
|
||||
This parameter is only possible for line 0 to 15. It
|
||||
can be a value of @ref EXTI_GPIOSel */
|
||||
} EXTI_ConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Line EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
|
||||
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
|
||||
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
|
||||
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
|
||||
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
|
||||
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
|
||||
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
|
||||
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
|
||||
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
|
||||
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
|
||||
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
|
||||
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
|
||||
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
|
||||
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
|
||||
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
|
||||
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
|
||||
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
|
||||
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
#if defined(EXTI_IMR_IM18)
|
||||
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
|
||||
#else
|
||||
#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM18 */
|
||||
#if defined(EXTI_IMR_IM19)
|
||||
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM19 */
|
||||
#if defined(EXTI_IMR_IM20)
|
||||
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM20 */
|
||||
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
|
||||
#if defined(EXTI_IMR_IM23)
|
||||
#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM1 asynchronous event */
|
||||
#endif /* EXTI_IMR_IM23 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Mode EXTI Mode
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_MODE_NONE 0x00000000u
|
||||
#define EXTI_MODE_INTERRUPT 0x00000001u
|
||||
#define EXTI_MODE_EVENT 0x00000002u
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define EXTI_TRIGGER_NONE 0x00000000u
|
||||
#define EXTI_TRIGGER_RISING 0x00000001u
|
||||
#define EXTI_TRIGGER_FALLING 0x00000002u
|
||||
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
|
||||
* @brief
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_GPIOA 0x00000000u
|
||||
#define EXTI_GPIOB 0x00000001u
|
||||
#define EXTI_GPIOC 0x00000002u
|
||||
#if defined (GPIOD)
|
||||
#define EXTI_GPIOD 0x00000003u
|
||||
#endif /* GPIOD */
|
||||
#if defined (GPIOE)
|
||||
#define EXTI_GPIOE 0x00000004u
|
||||
#endif /* GPIOE */
|
||||
#if defined (GPIOF)
|
||||
#define EXTI_GPIOF 0x00000005u
|
||||
#endif /* GPIOF */
|
||||
#if defined (GPIOG)
|
||||
#define EXTI_GPIOG 0x00000006u
|
||||
#endif /* GPIOG */
|
||||
#if defined (GPIOH)
|
||||
#define EXTI_GPIOH 0x00000007u
|
||||
#endif /* GPIOH */
|
||||
#if defined (GPIOI)
|
||||
#define EXTI_GPIOI 0x00000008u
|
||||
#endif /* GPIOI */
|
||||
#if defined (GPIOJ)
|
||||
#define EXTI_GPIOJ 0x00000009u
|
||||
#endif /* GPIOJ */
|
||||
#if defined (GPIOK)
|
||||
#define EXTI_GPIOK 0x0000000Au
|
||||
#endif /* GPIOK */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief EXTI Line property definition
|
||||
*/
|
||||
#define EXTI_PROPERTY_SHIFT 24u
|
||||
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
|
||||
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
|
||||
|
||||
/**
|
||||
* @brief EXTI bit usage
|
||||
*/
|
||||
#define EXTI_PIN_MASK 0x0000001Fu
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for interrupt & event mode
|
||||
*/
|
||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for trigger possibilities
|
||||
*/
|
||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
|
||||
/**
|
||||
* @brief EXTI Line number
|
||||
*/
|
||||
#if defined(EXTI_IMR_IM23)
|
||||
#define EXTI_LINE_NB 24UL
|
||||
#else
|
||||
#define EXTI_LINE_NB 23UL
|
||||
#endif /* EXTI_IMR_IM23 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
|
||||
((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
|
||||
(((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
|
||||
(((__LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
|
||||
|
||||
#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \
|
||||
(((__LINE__) & ~EXTI_MODE_MASK) == 0x00u))
|
||||
|
||||
#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
|
||||
|
||||
#define IS_EXTI_PENDING_EDGE(__LINE__) ((__LINE__) == EXTI_TRIGGER_RISING_FALLING)
|
||||
|
||||
#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u)
|
||||
|
||||
#if !defined (GPIOD)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOE)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOF)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOI)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOJ)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI))
|
||||
#else
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI) || \
|
||||
((__PORT__) == EXTI_GPIOJ) || \
|
||||
((__PORT__) == EXTI_GPIOK))
|
||||
#endif /* GPIOD */
|
||||
|
||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
||||
* @brief EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32f4xx_HAL_EXTI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
428
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h
Normal file
428
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h
Normal file
@@ -0,0 +1,428 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_flash.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_FLASH_H
|
||||
#define __STM32F4xx_HAL_FLASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief FLASH Procedure structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
FLASH_PROC_NONE = 0U,
|
||||
FLASH_PROC_SECTERASE,
|
||||
FLASH_PROC_MASSERASE,
|
||||
FLASH_PROC_PROGRAM
|
||||
} FLASH_ProcedureTypeDef;
|
||||
|
||||
/**
|
||||
* @brief FLASH handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
|
||||
|
||||
__IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
|
||||
|
||||
__IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
|
||||
|
||||
__IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
|
||||
|
||||
__IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
|
||||
|
||||
__IO uint32_t Address; /*Internal variable to save address selected for program*/
|
||||
|
||||
HAL_LockTypeDef Lock; /* FLASH locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /* FLASH error code */
|
||||
|
||||
}FLASH_ProcessTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup FLASH_Error_Code FLASH Error Code
|
||||
* @brief FLASH Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_FLASH_ERROR_RD 0x00000001U /*!< Read Protection error */
|
||||
#define HAL_FLASH_ERROR_PGS 0x00000002U /*!< Programming Sequence error */
|
||||
#define HAL_FLASH_ERROR_PGP 0x00000004U /*!< Programming Parallelism error */
|
||||
#define HAL_FLASH_ERROR_PGA 0x00000008U /*!< Programming Alignment error */
|
||||
#define HAL_FLASH_ERROR_WRP 0x00000010U /*!< Write protection error */
|
||||
#define HAL_FLASH_ERROR_OPERATION 0x00000020U /*!< Operation Error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Type_Program FLASH Type Program
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_TYPEPROGRAM_BYTE 0x00000000U /*!< Program byte (8-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_HALFWORD 0x00000001U /*!< Program a half-word (16-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_WORD 0x00000002U /*!< Program a word (32-bit) at a specified address */
|
||||
#define FLASH_TYPEPROGRAM_DOUBLEWORD 0x00000003U /*!< Program a double word (64-bit) at a specified address */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
||||
* @brief Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
||||
#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
|
||||
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
||||
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
||||
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
||||
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
|
||||
#if defined(FLASH_SR_RDERR)
|
||||
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< Read Protection error flag (PCROP) */
|
||||
#endif /* FLASH_SR_RDERR */
|
||||
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
||||
* @brief FLASH Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
||||
#define FLASH_IT_ERR 0x02000000U /*!< Error Interrupt source */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
||||
* @{
|
||||
*/
|
||||
#define FLASH_PSIZE_BYTE 0x00000000U
|
||||
#define FLASH_PSIZE_HALF_WORD 0x00000100U
|
||||
#define FLASH_PSIZE_WORD 0x00000200U
|
||||
#define FLASH_PSIZE_DOUBLE_WORD 0x00000300U
|
||||
#define CR_PSIZE_MASK 0xFFFFFCFFU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_Keys FLASH Keys
|
||||
* @{
|
||||
*/
|
||||
#define RDP_KEY ((uint16_t)0x00A5)
|
||||
#define FLASH_KEY1 0x45670123U
|
||||
#define FLASH_KEY2 0xCDEF89ABU
|
||||
#define FLASH_OPT_KEY1 0x08192A3BU
|
||||
#define FLASH_OPT_KEY2 0x4C5D6E7FU
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Set the FLASH Latency.
|
||||
* @param __LATENCY__ FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
|
||||
|
||||
/**
|
||||
* @brief Get the FLASH Latency.
|
||||
* @retval FLASH Latency
|
||||
* The value of this parameter depend on device used within the same series
|
||||
*/
|
||||
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH prefetch buffer.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH instruction cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the FLASH data cache.
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH instruction Cache.
|
||||
* @note This function must be used only when the Instruction Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_ICRST; \
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Resets the FLASH data Cache.
|
||||
* @note This function must be used only when the data Cache is disabled.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
|
||||
FLASH->ACR &= ~FLASH_ACR_DCRST; \
|
||||
}while(0U)
|
||||
/**
|
||||
* @brief Enable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified FLASH interrupt.
|
||||
* @param __INTERRUPT__ FLASH interrupt
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
||||
* @arg FLASH_IT_ERR: Error Interrupt
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Get the specified FLASH flag status.
|
||||
* @param __FLAG__ specifies the FLASH flags to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
|
||||
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
||||
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
||||
|
||||
/**
|
||||
* @brief Clear the specified FLASH flags.
|
||||
* @param __FLAG__ specifies the FLASH flags to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
||||
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
||||
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
||||
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
||||
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
||||
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
||||
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
|
||||
* (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices
|
||||
* @retval none
|
||||
*/
|
||||
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include FLASH HAL Extension module */
|
||||
#include "stm32f4xx_hal_flash_ex.h"
|
||||
#include "stm32f4xx_hal_flash_ramfunc.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup FLASH_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Program operation functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
||||
/* FLASH IRQ handler method */
|
||||
void HAL_FLASH_IRQHandler(void);
|
||||
/* Callbacks in non blocking modes */
|
||||
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
||||
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
||||
/* Option bytes control */
|
||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions ************************************************/
|
||||
uint32_t HAL_FLASH_GetError(void);
|
||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief ACR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define ACR_BYTE0_ADDRESS 0x40023C00U
|
||||
/**
|
||||
* @brief OPTCR register byte 0 (Bits[7:0]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE0_ADDRESS 0x40023C14U
|
||||
/**
|
||||
* @brief OPTCR register byte 1 (Bits[15:8]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE1_ADDRESS 0x40023C15U
|
||||
/**
|
||||
* @brief OPTCR register byte 2 (Bits[23:16]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE2_ADDRESS 0x40023C16U
|
||||
/**
|
||||
* @brief OPTCR register byte 3 (Bits[31:24]) base address
|
||||
*/
|
||||
#define OPTCR_BYTE3_ADDRESS 0x40023C17U
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
||||
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_FLASH_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
1066
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h
Normal file
1066
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h
Normal file
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,79 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_flash_ramfunc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of FLASH RAMFUNC driver.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_FLASH_RAMFUNC_H
|
||||
#define __STM32F4xx_FLASH_RAMFUNC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_RAMFUNC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void);
|
||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
309
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h
Normal file
309
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h
Normal file
@@ -0,0 +1,309 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_GPIO_H
|
||||
#define __STM32F4xx_HAL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins_define */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_mode_define */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_pull_define */
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_speed_define */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_Alternate_function_selection */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_RESET = 0,
|
||||
GPIO_PIN_SET
|
||||
}GPIO_PinState;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pins_define GPIO pins define
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
|
||||
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
|
||||
|
||||
#define GPIO_PIN_MASK 0x0000FFFFU /* PIN mask for assert test */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_mode_define GPIO mode define
|
||||
* @brief GPIO Configuration Mode
|
||||
* Elements values convention: 0xX0yz00YZ
|
||||
* - X : GPIO mode or EXTI Mode
|
||||
* - y : External IT or Event trigger detection
|
||||
* - z : IO configuration on External IT or Event
|
||||
* - Y : Output type (Push Pull or Open Drain)
|
||||
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_MODE_INPUT 0x00000000U /*!< Input Floating Mode */
|
||||
#define GPIO_MODE_OUTPUT_PP 0x00000001U /*!< Output Push Pull Mode */
|
||||
#define GPIO_MODE_OUTPUT_OD 0x00000011U /*!< Output Open Drain Mode */
|
||||
#define GPIO_MODE_AF_PP 0x00000002U /*!< Alternate Function Push Pull Mode */
|
||||
#define GPIO_MODE_AF_OD 0x00000012U /*!< Alternate Function Open Drain Mode */
|
||||
|
||||
#define GPIO_MODE_ANALOG 0x00000003U /*!< Analog Mode */
|
||||
|
||||
#define GPIO_MODE_IT_RISING 0x10110000U /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_IT_FALLING 0x10210000U /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_IT_RISING_FALLING 0x10310000U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
|
||||
#define GPIO_MODE_EVT_RISING 0x10120000U /*!< External Event Mode with Rising edge trigger detection */
|
||||
#define GPIO_MODE_EVT_FALLING 0x10220000U /*!< External Event Mode with Falling edge trigger detection */
|
||||
#define GPIO_MODE_EVT_RISING_FALLING 0x10320000U /*!< External Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_speed_define GPIO speed define
|
||||
* @brief GPIO Output Maximum frequency
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_SPEED_FREQ_LOW 0x00000000U /*!< IO works at 2 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_MEDIUM 0x00000001U /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_HIGH 0x00000002U /*!< range 25 MHz to 100 MHz, please refer to the product datasheet */
|
||||
#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003U /*!< range 50 MHz to 200 MHz, please refer to the product datasheet */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_pull_define GPIO pull define
|
||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_NOPULL 0x00000000U /*!< No Pull-up or Pull-down activation */
|
||||
#define GPIO_PULLUP 0x00000001U /*!< Pull-up activation */
|
||||
#define GPIO_PULLDOWN 0x00000002U /*!< Pull-down activation */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line flag is set or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending flags.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified EXTI line is asserted or not.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Clears the EXTI's line pending bits.
|
||||
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on selected EXTI line.
|
||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include GPIO HAL Extension module */
|
||||
#include "stm32f4xx_hal_gpio_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup GPIO_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup GPIO_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
||||
void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Constants GPIO Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
|
||||
#define IS_GPIO_PIN(PIN) (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U))
|
||||
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_PP) ||\
|
||||
((MODE) == GPIO_MODE_OUTPUT_OD) ||\
|
||||
((MODE) == GPIO_MODE_AF_PP) ||\
|
||||
((MODE) == GPIO_MODE_AF_OD) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_IT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
||||
((MODE) == GPIO_MODE_ANALOG))
|
||||
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
|
||||
((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
|
||||
#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
|
||||
((PULL) == GPIO_PULLDOWN))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup GPIO_Private_Functions GPIO Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_GPIO_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
1592
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h
Normal file
1592
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h
Normal file
File diff suppressed because it is too large
Load Diff
739
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h
Normal file
739
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h
Normal file
@@ -0,0 +1,739 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_i2c.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2C HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_I2C_H
|
||||
#define __STM32F4xx_HAL_I2C_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Exported_Types I2C Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
|
||||
* @brief I2C Configuration Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t ClockSpeed; /*!< Specifies the clock frequency.
|
||||
This parameter must be set to a value lower than 400kHz */
|
||||
|
||||
uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
|
||||
This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
|
||||
|
||||
uint32_t OwnAddress1; /*!< Specifies the first device own address.
|
||||
This parameter can be a 7-bit or 10-bit address. */
|
||||
|
||||
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_addressing_mode */
|
||||
|
||||
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
|
||||
This parameter can be a value of @ref I2C_dual_addressing_mode */
|
||||
|
||||
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
|
||||
This parameter can be a 7-bit address. */
|
||||
|
||||
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
|
||||
This parameter can be a value of @ref I2C_general_call_addressing_mode */
|
||||
|
||||
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
|
||||
This parameter can be a value of @ref I2C_nostretch_mode */
|
||||
|
||||
} I2C_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_state_structure_definition HAL state structure definition
|
||||
* @brief HAL State structure definition
|
||||
* @note HAL I2C State value coding follow below described bitmap :
|
||||
* b7-b6 Error information
|
||||
* 00 : No Error
|
||||
* 01 : Abort (Abort user request on going)
|
||||
* 10 : Timeout
|
||||
* 11 : Error
|
||||
* b5 Peripheral initilisation status
|
||||
* 0 : Reset (Peripheral not initialized)
|
||||
* 1 : Init done (Peripheral initialized and ready to use. HAL I2C Init function called)
|
||||
* b4 (not used)
|
||||
* x : Should be set to 0
|
||||
* b3
|
||||
* 0 : Ready or Busy (No Listen mode ongoing)
|
||||
* 1 : Listen (Peripheral in Address Listen Mode)
|
||||
* b2 Intrinsic process state
|
||||
* 0 : Ready
|
||||
* 1 : Busy (Peripheral busy with some configuration or internal operations)
|
||||
* b1 Rx state
|
||||
* 0 : Ready (no Rx operation ongoing)
|
||||
* 1 : Busy (Rx operation ongoing)
|
||||
* b0 Tx state
|
||||
* 0 : Ready (no Tx operation ongoing)
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
|
||||
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
|
||||
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
|
||||
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
|
||||
process is ongoing */
|
||||
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
|
||||
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
|
||||
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
|
||||
|
||||
} HAL_I2C_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
|
||||
* @brief HAL Mode structure definition
|
||||
* @note HAL I2C Mode value coding follow below described bitmap :\n
|
||||
* b7 (not used)\n
|
||||
* x : Should be set to 0\n
|
||||
* b6\n
|
||||
* 0 : None\n
|
||||
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
|
||||
* b5\n
|
||||
* 0 : None\n
|
||||
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
|
||||
* b4\n
|
||||
* 0 : None\n
|
||||
* 1 : Master (HAL I2C communication is in Master Mode)\n
|
||||
* b3-b2-b1-b0 (not used)\n
|
||||
* xxxx : Should be set to 0000
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
|
||||
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
|
||||
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
|
||||
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
|
||||
|
||||
} HAL_I2C_ModeTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
|
||||
* @brief I2C Error Code definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_I2C_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_I2C_ERROR_BERR 0x00000001U /*!< BERR error */
|
||||
#define HAL_I2C_ERROR_ARLO 0x00000002U /*!< ARLO error */
|
||||
#define HAL_I2C_ERROR_AF 0x00000004U /*!< AF error */
|
||||
#define HAL_I2C_ERROR_OVR 0x00000008U /*!< OVR error */
|
||||
#define HAL_I2C_ERROR_DMA 0x00000010U /*!< DMA transfer error */
|
||||
#define HAL_I2C_ERROR_TIMEOUT 0x00000020U /*!< Timeout Error */
|
||||
#define HAL_I2C_ERROR_SIZE 0x00000040U /*!< Size Management error */
|
||||
#define HAL_I2C_ERROR_DMA_PARAM 0x00000080U /*!< DMA Parameter Error */
|
||||
#define HAL_I2C_WRONG_START 0x00000200U /*!< Wrong start Error */
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_I2C_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
|
||||
* @brief I2C handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef struct __I2C_HandleTypeDef
|
||||
{
|
||||
I2C_TypeDef *Instance; /*!< I2C registers base address */
|
||||
|
||||
I2C_InitTypeDef Init; /*!< I2C communication parameters */
|
||||
|
||||
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
|
||||
|
||||
uint16_t XferSize; /*!< I2C transfer size */
|
||||
|
||||
__IO uint16_t XferCount; /*!< I2C transfer counter */
|
||||
|
||||
__IO uint32_t XferOptions; /*!< I2C transfer options */
|
||||
|
||||
__IO uint32_t PreviousState; /*!< I2C communication Previous state and mode
|
||||
context for internal usage */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< I2C locking object */
|
||||
|
||||
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
|
||||
|
||||
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< I2C Error code */
|
||||
|
||||
__IO uint32_t Devaddress; /*!< I2C Target device address */
|
||||
|
||||
__IO uint32_t Memaddress; /*!< I2C Target memory address */
|
||||
|
||||
__IO uint32_t MemaddSize; /*!< I2C Target memory address size */
|
||||
|
||||
__IO uint32_t EventCount; /*!< I2C Event counter */
|
||||
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
|
||||
void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
|
||||
void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
|
||||
void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
|
||||
void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
|
||||
void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
|
||||
void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
|
||||
void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
|
||||
void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
|
||||
|
||||
void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
|
||||
|
||||
void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
} I2C_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL I2C Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
|
||||
HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
|
||||
HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
|
||||
HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
|
||||
HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
|
||||
HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
|
||||
HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
|
||||
HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
|
||||
|
||||
HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
|
||||
HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
|
||||
|
||||
} HAL_I2C_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL I2C Callback pointer definition
|
||||
*/
|
||||
typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
|
||||
typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
|
||||
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Constants I2C Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DUTYCYCLE_2 0x00000000U
|
||||
#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_addressing_mode I2C addressing mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_ADDRESSINGMODE_7BIT 0x00004000U
|
||||
#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DUALADDRESS_DISABLE 0x00000000U
|
||||
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_GENERALCALL_DISABLE 0x00000000U
|
||||
#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_nostretch_mode I2C nostretch mode
|
||||
* @{
|
||||
*/
|
||||
#define I2C_NOSTRETCH_DISABLE 0x00000000U
|
||||
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
|
||||
* @{
|
||||
*/
|
||||
#define I2C_MEMADD_SIZE_8BIT 0x00000001U
|
||||
#define I2C_MEMADD_SIZE_16BIT 0x00000010U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XferDirection_definition I2C XferDirection definition
|
||||
* @{
|
||||
*/
|
||||
#define I2C_DIRECTION_RECEIVE 0x00000000U
|
||||
#define I2C_DIRECTION_TRANSMIT 0x00000001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_XferOptions_definition I2C XferOptions definition
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FIRST_FRAME 0x00000001U
|
||||
#define I2C_FIRST_AND_NEXT_FRAME 0x00000002U
|
||||
#define I2C_NEXT_FRAME 0x00000004U
|
||||
#define I2C_FIRST_AND_LAST_FRAME 0x00000008U
|
||||
#define I2C_LAST_FRAME_NO_STOP 0x00000010U
|
||||
#define I2C_LAST_FRAME 0x00000020U
|
||||
|
||||
/* List of XferOptions in usage of :
|
||||
* 1- Restart condition in all use cases (direction change or not)
|
||||
*/
|
||||
#define I2C_OTHER_FRAME (0x00AA0000U)
|
||||
#define I2C_OTHER_AND_LAST_FRAME (0xAA000000U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
|
||||
* @brief I2C Interrupt definition
|
||||
* Elements values convention: 0xXXXXXXXX
|
||||
* - XXXXXXXX : Interrupt control mask
|
||||
* @{
|
||||
*/
|
||||
#define I2C_IT_BUF I2C_CR2_ITBUFEN
|
||||
#define I2C_IT_EVT I2C_CR2_ITEVTEN
|
||||
#define I2C_IT_ERR I2C_CR2_ITERREN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup I2C_Flag_definition I2C Flag definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define I2C_FLAG_OVR 0x00010800U
|
||||
#define I2C_FLAG_AF 0x00010400U
|
||||
#define I2C_FLAG_ARLO 0x00010200U
|
||||
#define I2C_FLAG_BERR 0x00010100U
|
||||
#define I2C_FLAG_TXE 0x00010080U
|
||||
#define I2C_FLAG_RXNE 0x00010040U
|
||||
#define I2C_FLAG_STOPF 0x00010010U
|
||||
#define I2C_FLAG_ADD10 0x00010008U
|
||||
#define I2C_FLAG_BTF 0x00010004U
|
||||
#define I2C_FLAG_ADDR 0x00010002U
|
||||
#define I2C_FLAG_SB 0x00010001U
|
||||
#define I2C_FLAG_DUALF 0x00100080U
|
||||
#define I2C_FLAG_GENCALL 0x00100010U
|
||||
#define I2C_FLAG_TRA 0x00100004U
|
||||
#define I2C_FLAG_BUSY 0x00100002U
|
||||
#define I2C_FLAG_MSL 0x00100001U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
|
||||
/** @defgroup I2C_Exported_Macros I2C Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset I2C handle state.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_I2C_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
|
||||
#endif
|
||||
|
||||
/** @brief Enable or disable the specified I2C interrupts.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable or disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2C_IT_BUF: Buffer interrupt enable
|
||||
* @arg I2C_IT_EVT: Event interrupt enable
|
||||
* @arg I2C_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))
|
||||
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
||||
|
||||
/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2C_IT_BUF: Buffer interrupt enable
|
||||
* @arg I2C_IT_EVT: Event interrupt enable
|
||||
* @arg I2C_IT_ERR: Error interrupt enable
|
||||
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Checks whether the specified I2C flag is set or not.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg I2C_FLAG_OVR: Overrun/Underrun flag
|
||||
* @arg I2C_FLAG_AF: Acknowledge failure flag
|
||||
* @arg I2C_FLAG_ARLO: Arbitration lost flag
|
||||
* @arg I2C_FLAG_BERR: Bus error flag
|
||||
* @arg I2C_FLAG_TXE: Data register empty flag
|
||||
* @arg I2C_FLAG_RXNE: Data register not empty flag
|
||||
* @arg I2C_FLAG_STOPF: Stop detection flag
|
||||
* @arg I2C_FLAG_ADD10: 10-bit header sent flag
|
||||
* @arg I2C_FLAG_BTF: Byte transfer finished flag
|
||||
* @arg I2C_FLAG_ADDR: Address sent flag
|
||||
* Address matched flag
|
||||
* @arg I2C_FLAG_SB: Start bit flag
|
||||
* @arg I2C_FLAG_DUALF: Dual flag
|
||||
* @arg I2C_FLAG_GENCALL: General call header flag
|
||||
* @arg I2C_FLAG_TRA: Transmitter/Receiver flag
|
||||
* @arg I2C_FLAG_BUSY: Bus busy flag
|
||||
* @arg I2C_FLAG_MSL: Master/Slave flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U) ? \
|
||||
(((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) : \
|
||||
(((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET))
|
||||
|
||||
/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
|
||||
* @arg I2C_FLAG_AF: Acknowledge failure flag
|
||||
* @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
|
||||
* @arg I2C_FLAG_BERR: Bus error flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
|
||||
|
||||
/** @brief Clears the I2C ADDR pending flag.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR1; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR2; \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Clears the I2C STOPF pending flag.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR1; \
|
||||
SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0)
|
||||
|
||||
/** @brief Enable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
|
||||
|
||||
/** @brief Disable the specified I2C peripheral.
|
||||
* @param __HANDLE__ specifies the I2C Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_I2C_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include I2C HAL Extension module */
|
||||
#include "stm32f4xx_hal_i2c_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2C_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions******************************/
|
||||
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
|
||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions ****************************************************/
|
||||
/******* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
|
||||
|
||||
/******* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
|
||||
|
||||
/******* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
||||
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
|
||||
* @{
|
||||
*/
|
||||
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
|
||||
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
||||
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
|
||||
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State, Mode and Error functions *********************************/
|
||||
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
|
||||
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
|
||||
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Constants I2C Private Constants
|
||||
* @{
|
||||
*/
|
||||
#define I2C_FLAG_MASK 0x0000FFFFU
|
||||
#define I2C_MIN_PCLK_FREQ_STANDARD 2000000U /*!< 2 MHz */
|
||||
#define I2C_MIN_PCLK_FREQ_FAST 4000000U /*!< 4 MHz */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Macros I2C Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST))
|
||||
#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__) (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR)
|
||||
#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U)
|
||||
#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
|
||||
#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U))
|
||||
#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9))
|
||||
#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
|
||||
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
|
||||
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
|
||||
|
||||
#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (uint8_t)(~I2C_OAR1_ADD0)))
|
||||
#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
|
||||
|
||||
#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
|
||||
#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)0x00F0)))
|
||||
#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)(0x00F1))))
|
||||
|
||||
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0xFF00)) >> 8)))
|
||||
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF)))
|
||||
|
||||
/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
|
||||
((CYCLE) == I2C_DUTYCYCLE_16_9))
|
||||
#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
|
||||
((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
|
||||
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
|
||||
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
|
||||
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
|
||||
((CALL) == I2C_GENERALCALL_ENABLE))
|
||||
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
|
||||
((STRETCH) == I2C_NOSTRETCH_ENABLE))
|
||||
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
|
||||
((SIZE) == I2C_MEMADD_SIZE_16BIT))
|
||||
#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 400000U))
|
||||
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U)
|
||||
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U)
|
||||
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_NEXT_FRAME) || \
|
||||
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME) || \
|
||||
((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
|
||||
IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
|
||||
|
||||
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
|
||||
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
|
||||
|
||||
#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
|
||||
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup I2C_Private_Functions I2C Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_I2C_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
117
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h
Normal file
117
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h
Normal file
@@ -0,0 +1,117 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_i2c_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of I2C HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_I2C_EX_H
|
||||
#define __STM32F4xx_HAL_I2C_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF)
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2CEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Exported_Constants I2C Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup I2CEx_Analog_Filter I2C Analog Filter
|
||||
* @{
|
||||
*/
|
||||
#define I2C_ANALOGFILTER_ENABLE 0x00000000U
|
||||
#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup I2CEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup I2CEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
|
||||
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Constants I2C Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup I2CEx_Private_Macros I2C Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
|
||||
((FILTER) == I2C_ANALOGFILTER_DISABLE))
|
||||
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_I2C_EX_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
688
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h
Normal file
688
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h
Normal file
@@ -0,0 +1,688 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_ltdc.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of LTDC HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_LTDC_H
|
||||
#define STM32F4xx_HAL_LTDC_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
#if defined (LTDC)
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC LTDC
|
||||
* @brief LTDC HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Exported_Types LTDC Exported Types
|
||||
* @{
|
||||
*/
|
||||
#define MAX_LAYER 2U
|
||||
|
||||
/**
|
||||
* @brief LTDC color structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t Blue; /*!< Configures the blue value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint8_t Green; /*!< Configures the green value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint8_t Red; /*!< Configures the red value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint8_t Reserved; /*!< Reserved 0xFF */
|
||||
} LTDC_ColorTypeDef;
|
||||
|
||||
/**
|
||||
* @brief LTDC Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity.
|
||||
This parameter can be one value of @ref LTDC_HS_POLARITY */
|
||||
|
||||
uint32_t VSPolarity; /*!< configures the vertical synchronization polarity.
|
||||
This parameter can be one value of @ref LTDC_VS_POLARITY */
|
||||
|
||||
uint32_t DEPolarity; /*!< configures the data enable polarity.
|
||||
This parameter can be one of value of @ref LTDC_DE_POLARITY */
|
||||
|
||||
uint32_t PCPolarity; /*!< configures the pixel clock polarity.
|
||||
This parameter can be one of value of @ref LTDC_PC_POLARITY */
|
||||
|
||||
uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width.
|
||||
This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height.
|
||||
This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
|
||||
This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height.
|
||||
This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t AccumulatedActiveW; /*!< configures the accumulated active width.
|
||||
This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t AccumulatedActiveH; /*!< configures the accumulated active height.
|
||||
This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t TotalWidth; /*!< configures the total width.
|
||||
This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t TotalHeigh; /*!< configures the total height.
|
||||
This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
|
||||
|
||||
LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */
|
||||
} LTDC_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief LTDC Layer structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position.
|
||||
This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position.
|
||||
This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
|
||||
|
||||
uint32_t WindowY0; /*!< Configures the Window vertical Start Position.
|
||||
This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t WindowY1; /*!< Configures the Window vertical Stop Position.
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FF. */
|
||||
|
||||
uint32_t PixelFormat; /*!< Specifies the pixel format.
|
||||
This parameter can be one of value of @ref LTDC_Pixelformat */
|
||||
|
||||
uint32_t Alpha; /*!< Specifies the constant alpha used for blending.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint32_t Alpha0; /*!< Configures the default alpha value.
|
||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
|
||||
|
||||
uint32_t BlendingFactor1; /*!< Select the blending factor 1.
|
||||
This parameter can be one of value of @ref LTDC_BlendingFactor1 */
|
||||
|
||||
uint32_t BlendingFactor2; /*!< Select the blending factor 2.
|
||||
This parameter can be one of value of @ref LTDC_BlendingFactor2 */
|
||||
|
||||
uint32_t FBStartAdress; /*!< Configures the color frame buffer address */
|
||||
|
||||
uint32_t ImageWidth; /*!< Configures the color frame buffer line length.
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */
|
||||
|
||||
uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer.
|
||||
This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
|
||||
|
||||
LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */
|
||||
} LTDC_LayerCfgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL LTDC State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_LTDC_STATE_RESET = 0x00U, /*!< LTDC not yet initialized or disabled */
|
||||
HAL_LTDC_STATE_READY = 0x01U, /*!< LTDC initialized and ready for use */
|
||||
HAL_LTDC_STATE_BUSY = 0x02U, /*!< LTDC internal process is ongoing */
|
||||
HAL_LTDC_STATE_TIMEOUT = 0x03U, /*!< LTDC Timeout state */
|
||||
HAL_LTDC_STATE_ERROR = 0x04U /*!< LTDC state error */
|
||||
} HAL_LTDC_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief LTDC handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __LTDC_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
{
|
||||
LTDC_TypeDef *Instance; /*!< LTDC Register base address */
|
||||
|
||||
LTDC_InitTypeDef Init; /*!< LTDC parameters */
|
||||
|
||||
LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< LTDC Lock */
|
||||
|
||||
__IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< LTDC Error code */
|
||||
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
void (* LineEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Line Event Callback */
|
||||
void (* ReloadEventCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Reload Event Callback */
|
||||
void (* ErrorCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Error Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __LTDC_HandleTypeDef *hltdc); /*!< LTDC Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
|
||||
} LTDC_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL LTDC Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_LTDC_MSPINIT_CB_ID = 0x00U, /*!< LTDC MspInit callback ID */
|
||||
HAL_LTDC_MSPDEINIT_CB_ID = 0x01U, /*!< LTDC MspDeInit callback ID */
|
||||
|
||||
HAL_LTDC_LINE_EVENT_CB_ID = 0x02U, /*!< LTDC Line Event Callback ID */
|
||||
HAL_LTDC_RELOAD_EVENT_CB_ID = 0x03U, /*!< LTDC Reload Callback ID */
|
||||
HAL_LTDC_ERROR_CB_ID = 0x04U /*!< LTDC Error Callback ID */
|
||||
|
||||
} HAL_LTDC_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL LTDC Callback pointer definition
|
||||
*/
|
||||
typedef void (*pLTDC_CallbackTypeDef)(LTDC_HandleTypeDef *hltdc); /*!< pointer to an LTDC callback function */
|
||||
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Error_Code LTDC Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_LTDC_ERROR_NONE 0x00000000U /*!< LTDC No error */
|
||||
#define HAL_LTDC_ERROR_TE 0x00000001U /*!< LTDC Transfer error */
|
||||
#define HAL_LTDC_ERROR_FU 0x00000002U /*!< LTDC FIFO Underrun */
|
||||
#define HAL_LTDC_ERROR_TIMEOUT 0x00000020U /*!< LTDC Timeout error */
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_LTDC_ERROR_INVALID_CALLBACK 0x00000040U /*!< LTDC Invalid Callback error */
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Layer LTDC Layer
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_LAYER_1 0x00000000U /*!< LTDC Layer 1 */
|
||||
#define LTDC_LAYER_2 0x00000001U /*!< LTDC Layer 2 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_HSPOLARITY_AL 0x00000000U /*!< Horizontal Synchronization is active low. */
|
||||
#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_VSPOLARITY_AL 0x00000000U /*!< Vertical Synchronization is active low. */
|
||||
#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_DEPOLARITY_AL 0x00000000U /*!< Data Enable, is active low. */
|
||||
#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_PCPOLARITY_IPC 0x00000000U /*!< input pixel clock. */
|
||||
#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_SYNC LTDC SYNC
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16U) /*!< Horizontal synchronization width. */
|
||||
#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_COLOR 0x000000FFU /*!< Color mask */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_BLENDING_FACTOR1_CA 0x00000400U /*!< Blending factor : Cte Alpha */
|
||||
#define LTDC_BLENDING_FACTOR1_PAxCA 0x00000600U /*!< Blending factor : Cte Alpha x Pixel Alpha*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_BLENDING_FACTOR2_CA 0x00000005U /*!< Blending factor : Cte Alpha */
|
||||
#define LTDC_BLENDING_FACTOR2_PAxCA 0x00000007U /*!< Blending factor : Cte Alpha x Pixel Alpha*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Pixelformat LTDC Pixel format
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_PIXEL_FORMAT_ARGB8888 0x00000000U /*!< ARGB8888 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_RGB888 0x00000001U /*!< RGB888 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_RGB565 0x00000002U /*!< RGB565 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_ARGB1555 0x00000003U /*!< ARGB1555 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_ARGB4444 0x00000004U /*!< ARGB4444 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_L8 0x00000005U /*!< L8 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_AL44 0x00000006U /*!< AL44 LTDC pixel format */
|
||||
#define LTDC_PIXEL_FORMAT_AL88 0x00000007U /*!< AL88 LTDC pixel format */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Alpha LTDC Alpha
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Constant Alpha mask */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position */
|
||||
#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */
|
||||
|
||||
#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */
|
||||
#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Interrupts LTDC Interrupts
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_IT_LI LTDC_IER_LIE /*!< LTDC Line Interrupt */
|
||||
#define LTDC_IT_FU LTDC_IER_FUIE /*!< LTDC FIFO Underrun Interrupt */
|
||||
#define LTDC_IT_TE LTDC_IER_TERRIE /*!< LTDC Transfer Error Interrupt */
|
||||
#define LTDC_IT_RR LTDC_IER_RRIE /*!< LTDC Register Reload Interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Flags LTDC Flags
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_FLAG_LI LTDC_ISR_LIF /*!< LTDC Line Interrupt Flag */
|
||||
#define LTDC_FLAG_FU LTDC_ISR_FUIF /*!< LTDC FIFO Underrun interrupt Flag */
|
||||
#define LTDC_FLAG_TE LTDC_ISR_TERRIF /*!< LTDC Transfer Error interrupt Flag */
|
||||
#define LTDC_FLAG_RR LTDC_ISR_RRIF /*!< LTDC Register Reload interrupt Flag */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup LTDC_Reload_Type LTDC Reload Type
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_RELOAD_IMMEDIATE LTDC_SRCR_IMR /*!< Immediate Reload */
|
||||
#define LTDC_RELOAD_VERTICAL_BLANKING LTDC_SRCR_VBR /*!< Vertical Blanking Reload */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset LTDC handle state.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_LTDC_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
|
||||
#endif /*USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Enable the LTDC.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the LTDC.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
|
||||
|
||||
/**
|
||||
* @brief Enable the LTDC Layer.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __LAYER__ Specify the layer to be enabled.
|
||||
* This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1).
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
|
||||
|
||||
/**
|
||||
* @brief Disable the LTDC Layer.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __LAYER__ Specify the layer to be disabled.
|
||||
* This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1).
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
|
||||
|
||||
/**
|
||||
* @brief Reload immediately all LTDC Layers.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
|
||||
|
||||
/**
|
||||
* @brief Reload during vertical blanking period all LTDC Layers.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_VBR)
|
||||
|
||||
/* Interrupt & Flag management */
|
||||
/**
|
||||
* @brief Get the LTDC pending flags.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __FLAG__ Get the specified flag.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_FLAG_LI: Line Interrupt flag
|
||||
* @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_FLAG_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
|
||||
* @retval The state of FLAG (SET or RESET).
|
||||
*/
|
||||
#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clears the LTDC pending flags.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __FLAG__ Specify the flag to clear.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_FLAG_LI: Line Interrupt flag
|
||||
* @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_FLAG_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Enables the specified LTDC interrupts.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __INTERRUPT__ Specify the LTDC interrupt sources to be enabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_IT_LI: Line Interrupt flag
|
||||
* @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_IT_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_IT_RR: Register Reload Interrupt Flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disables the specified LTDC interrupts.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __INTERRUPT__ Specify the LTDC interrupt sources to be disabled.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg LTDC_IT_LI: Line Interrupt flag
|
||||
* @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_IT_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_IT_RR: Register Reload Interrupt Flag
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Check whether the specified LTDC interrupt has occurred or not.
|
||||
* @param __HANDLE__ LTDC handle
|
||||
* @param __INTERRUPT__ Specify the LTDC interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg LTDC_IT_LI: Line Interrupt flag
|
||||
* @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
|
||||
* @arg LTDC_IT_TE: Transfer Error interrupt flag
|
||||
* @arg LTDC_IT_RR: Register Reload Interrupt Flag
|
||||
* @retval The state of INTERRUPT (SET or RESET).
|
||||
*/
|
||||
#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include LTDC HAL Extension module */
|
||||
#include "stm32f4xx_hal_ltdc_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup LTDC_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
/** @addtogroup LTDC_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
|
||||
HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc);
|
||||
void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, pLTDC_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDC_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDC_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ***********************************************/
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
|
||||
HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDC_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions *************************************************/
|
||||
HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
|
||||
uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Private_Macros LTDC Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84U + (0x80U*(__LAYER__)))))
|
||||
#define IS_LTDC_LAYER(__LAYER__) ((__LAYER__) < MAX_LAYER)
|
||||
#define IS_LTDC_HSPOL(__HSPOL__) (((__HSPOL__) == LTDC_HSPOLARITY_AL) || ((__HSPOL__) == LTDC_HSPOLARITY_AH))
|
||||
#define IS_LTDC_VSPOL(__VSPOL__) (((__VSPOL__) == LTDC_VSPOLARITY_AL) || ((__VSPOL__) == LTDC_VSPOLARITY_AH))
|
||||
#define IS_LTDC_DEPOL(__DEPOL__) (((__DEPOL__) == LTDC_DEPOLARITY_AL) || ((__DEPOL__) == LTDC_DEPOLARITY_AH))
|
||||
#define IS_LTDC_PCPOL(__PCPOL__) (((__PCPOL__) == LTDC_PCPOLARITY_IPC) || ((__PCPOL__) == LTDC_PCPOLARITY_IIPC))
|
||||
#define IS_LTDC_HSYNC(__HSYNC__) ((__HSYNC__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_VSYNC(__VSYNC__) ((__VSYNC__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_AHBP(__AHBP__) ((__AHBP__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_AVBP(__AVBP__) ((__AVBP__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_AAW(__AAW__) ((__AAW__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_AAH(__AAH__) ((__AAH__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_TOTALW(__TOTALW__) ((__TOTALW__) <= LTDC_HORIZONTALSYNC)
|
||||
#define IS_LTDC_TOTALH(__TOTALH__) ((__TOTALH__) <= LTDC_VERTICALSYNC)
|
||||
#define IS_LTDC_BLUEVALUE(__BBLUE__) ((__BBLUE__) <= LTDC_COLOR)
|
||||
#define IS_LTDC_GREENVALUE(__BGREEN__) ((__BGREEN__) <= LTDC_COLOR)
|
||||
#define IS_LTDC_REDVALUE(__BRED__) ((__BRED__) <= LTDC_COLOR)
|
||||
#define IS_LTDC_BLENDING_FACTOR1(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_CA) || \
|
||||
((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_PAxCA))
|
||||
#define IS_LTDC_BLENDING_FACTOR2(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_CA) || \
|
||||
((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_PAxCA))
|
||||
#define IS_LTDC_PIXEL_FORMAT(__PIXEL_FORMAT__) (((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB8888) || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB888) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB565) || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB1555) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB4444) || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_L8) || \
|
||||
((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL44) || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL88))
|
||||
#define IS_LTDC_ALPHA(__ALPHA__) ((__ALPHA__) <= LTDC_ALPHA)
|
||||
#define IS_LTDC_HCONFIGST(__HCONFIGST__) ((__HCONFIGST__) <= LTDC_STARTPOSITION)
|
||||
#define IS_LTDC_HCONFIGSP(__HCONFIGSP__) ((__HCONFIGSP__) <= LTDC_STOPPOSITION)
|
||||
#define IS_LTDC_VCONFIGST(__VCONFIGST__) ((__VCONFIGST__) <= LTDC_STARTPOSITION)
|
||||
#define IS_LTDC_VCONFIGSP(__VCONFIGSP__) ((__VCONFIGSP__) <= LTDC_STOPPOSITION)
|
||||
#define IS_LTDC_CFBP(__CFBP__) ((__CFBP__) <= LTDC_COLOR_FRAME_BUFFER)
|
||||
#define IS_LTDC_CFBLL(__CFBLL__) ((__CFBLL__) <= LTDC_COLOR_FRAME_BUFFER)
|
||||
#define IS_LTDC_CFBLNBR(__CFBLNBR__) ((__CFBLNBR__) <= LTDC_LINE_NUMBER)
|
||||
#define IS_LTDC_LIPOS(__LIPOS__) ((__LIPOS__) <= 0x7FFU)
|
||||
#define IS_LTDC_RELOAD(__RELOADTYPE__) (((__RELOADTYPE__) == LTDC_RELOAD_IMMEDIATE) || ((__RELOADTYPE__) == LTDC_RELOAD_VERTICAL_BLANKING))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup LTDC_Private_Functions LTDC Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* LTDC */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_HAL_LTDC_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
86
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc_ex.h
Normal file
86
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc_ex.h
Normal file
@@ -0,0 +1,86 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_ltdc_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of LTDC HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_LTDC_EX_H
|
||||
#define STM32F4xx_HAL_LTDC_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
#if defined (LTDC) && defined (DSI)
|
||||
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDCEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup LTDCEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup LTDCEx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg);
|
||||
HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* LTDC && DSI */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_HAL_LTDC_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
431
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h
Normal file
431
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h
Normal file
@@ -0,0 +1,431 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_PWR_H
|
||||
#define __STM32F4xx_HAL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PWR PVD configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
||||
|
||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
||||
}PWR_PVDTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN1 0x00000100U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
|
||||
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
|
||||
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
|
||||
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
|
||||
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
|
||||
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
|
||||
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
|
||||
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
|
||||
(Compare internally to VREFINT) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
|
||||
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_ON 0x00000000U
|
||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Flag PWR Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_WU PWR_CSR_WUF
|
||||
#define PWR_FLAG_SB PWR_CSR_SBF
|
||||
#define PWR_FLAG_PVDO PWR_CSR_PVDO
|
||||
#define PWR_FLAG_BRR PWR_CSR_BRR
|
||||
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
||||
* was received from the WKUP pin or from the RTC alarm (Alarm A
|
||||
* or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
|
||||
* An additional wakeup event is detected if the WKUP pin is enabled
|
||||
* (by setting the EWUP bit) when the WKUP pin level is already high.
|
||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
||||
* resumed from StandBy mode.
|
||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
||||
* For this reason, this bit is equal to 0 after Standby or reset
|
||||
* until the PVDE bit is set.
|
||||
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
||||
* when the device wakes up from Standby mode or by a system reset
|
||||
* or power reset.
|
||||
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
|
||||
* scaling output selection is ready.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the PWR's pending flags.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag
|
||||
* @arg PWR_FLAG_SB: StandBy flag
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD EXTI Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
||||
* This parameter can be:
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
||||
* @retval EXTI PVD Line Status.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Clear the PVD Exti flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on PVD EXTI line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PWR HAL Extension module */
|
||||
#include "stm32f4xx_hal_pwr_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_PWR_DeInit(void);
|
||||
void HAL_PWR_EnableBkUpAccess(void);
|
||||
void HAL_PWR_DisableBkUpAccess(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/* PVD configuration */
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
||||
void HAL_PWR_EnablePVD(void);
|
||||
void HAL_PWR_DisablePVD(void);
|
||||
|
||||
/* WakeUp pins configuration */
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
||||
|
||||
/* Low Power modes entry */
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
||||
void HAL_PWR_EnterSTANDBYMode(void);
|
||||
|
||||
/* Power PVD IRQ Handler */
|
||||
void HAL_PWR_PVD_IRQHandler(void);
|
||||
void HAL_PWR_PVDCallback(void);
|
||||
|
||||
/* Cortex System Control functions *******************************************/
|
||||
void HAL_PWR_EnableSleepOnExit(void);
|
||||
void HAL_PWR_DisableSleepOnExit(void);
|
||||
void HAL_PWR_EnableSEVOnPend(void);
|
||||
void HAL_PWR_DisableSEVOnPend(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_register_alias_address PWR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
|
||||
#define PWR_CR_OFFSET 0x00U
|
||||
#define PWR_CSR_OFFSET 0x04U
|
||||
#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
|
||||
#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CR_register_alias PWR CR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of DBP bit */
|
||||
#define DBP_BIT_NUMBER PWR_CR_DBP_Pos
|
||||
#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of PVDE bit */
|
||||
#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos
|
||||
#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of VOS bit */
|
||||
#define VOS_BIT_NUMBER PWR_CR_VOS_Pos
|
||||
#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of EWUP bit */
|
||||
#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos
|
||||
#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
|
||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_PWR_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
344
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h
Normal file
344
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h
Normal file
@@ -0,0 +1,344 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pwr_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_PWR_EX_H
|
||||
#define __STM32F4xx_HAL_PWR_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
|
||||
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
|
||||
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
|
||||
#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
|
||||
#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 0x00000000U /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
|
||||
#else
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
|
||||
180 MHz by activating the over-drive mode. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
|
||||
168 MHz by activating the over-drive mode. */
|
||||
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN2 0x00000080U
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
#define PWR_WAKEUP_PIN3 0x00000040U
|
||||
#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \
|
||||
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
|
||||
STM32F413xx || STM32F423xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
#else
|
||||
/** @brief macros configure the main internal regulator output voltage.
|
||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
||||
* a tradeoff between performance and power consumption when the device does
|
||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
|
||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
|
||||
/* Delay after an RCC peripheral clock enabling */ \
|
||||
tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/** @brief Macros to enable or disable the Over drive mode.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
|
||||
#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
|
||||
|
||||
/** @brief Macros to enable or disable the Over drive switching.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
|
||||
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
|
||||
|
||||
/** @brief Macros to enable or disable the Under drive mode.
|
||||
* @note This mode is enabled only with STOP low power mode.
|
||||
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
|
||||
* mode is only available when the main regulator or the low power regulator
|
||||
* is in low voltage mode.
|
||||
* @note If the Under-drive mode was enabled, it is automatically disabled after
|
||||
* exiting Stop mode.
|
||||
* When the voltage regulator operates in Under-drive mode, an additional
|
||||
* startup delay is induced when waking up from Stop mode.
|
||||
*/
|
||||
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
|
||||
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
|
||||
* is ready
|
||||
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
|
||||
* switching is ready
|
||||
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
|
||||
* is enabled in Stop mode
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the Under-Drive Ready flag.
|
||||
* @note These macros can be used only for STM32F42xx/STM3243xx devices.
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
|
||||
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWREx_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
void HAL_PWREx_EnableFlashPowerDown(void);
|
||||
void HAL_PWREx_DisableFlashPowerDown(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
||||
uint32_t HAL_PWREx_GetVoltageRange(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
||||
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
|
||||
defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
|
||||
defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
|
||||
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
|
||||
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
|
||||
#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
|
||||
STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
|
||||
defined(STM32F469xx) || defined(STM32F479xx)
|
||||
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
|
||||
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Constants PWREx Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_register_alias_address PWREx Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of FPDS bit */
|
||||
#define FPDS_BIT_NUMBER PWR_CR_FPDS_Pos
|
||||
#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of ODEN bit */
|
||||
#define ODEN_BIT_NUMBER PWR_CR_ODEN_Pos
|
||||
#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of ODSWEN bit */
|
||||
#define ODSWEN_BIT_NUMBER PWR_CR_ODSWEN_Pos
|
||||
#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of MRLVDS bit */
|
||||
#define MRLVDS_BIT_NUMBER PWR_CR_MRLVDS_Pos
|
||||
#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of LPLVDS bit */
|
||||
#define LPLVDS_BIT_NUMBER PWR_CR_LPLVDS_Pos
|
||||
#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of BRE bit */
|
||||
#define BRE_BIT_NUMBER PWR_CSR_BRE_Pos
|
||||
#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWREx_Private_Macros PWREx Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
|
||||
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
|
||||
#else
|
||||
#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
|
||||
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
|
||||
#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
|
||||
#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\
|
||||
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
|
||||
defined(STM32F423xx)
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \
|
||||
((PIN) == PWR_WAKEUP_PIN3))
|
||||
#else
|
||||
#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
|
||||
#endif /* STM32F446xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_PWR_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
1464
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h
Normal file
1464
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h
Normal file
File diff suppressed because it is too large
Load Diff
7138
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h
Normal file
7138
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h
Normal file
File diff suppressed because it is too large
Load Diff
360
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h
Normal file
360
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h
Normal file
@@ -0,0 +1,360 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_rng.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of RNG HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_RNG_H
|
||||
#define STM32F4xx_HAL_RNG_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (RNG)
|
||||
|
||||
/** @defgroup RNG RNG
|
||||
* @brief RNG HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types RNG Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */
|
||||
HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */
|
||||
HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */
|
||||
HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */
|
||||
HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */
|
||||
|
||||
} HAL_RNG_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition
|
||||
* @{
|
||||
*/
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __RNG_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* (USE_HAL_RNG_REGISTER_CALLBACKS) */
|
||||
{
|
||||
RNG_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< RNG locking object */
|
||||
|
||||
__IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< RNG Error code */
|
||||
|
||||
uint32_t RandomNumber; /*!< Last Generated RNG Data */
|
||||
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
void (* ReadyDataCallback)(struct __RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< RNG Data Ready Callback */
|
||||
void (* ErrorCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Error Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __RNG_HandleTypeDef *hrng); /*!< RNG Msp DeInit callback */
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
} RNG_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL RNG Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_RNG_ERROR_CB_ID = 0x00U, /*!< RNG Error Callback ID */
|
||||
|
||||
HAL_RNG_MSPINIT_CB_ID = 0x01U, /*!< RNG MspInit callback ID */
|
||||
HAL_RNG_MSPDEINIT_CB_ID = 0x02U /*!< RNG MspDeInit callback ID */
|
||||
|
||||
} HAL_RNG_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL RNG Callback pointer definition
|
||||
*/
|
||||
typedef void (*pRNG_CallbackTypeDef)(RNG_HandleTypeDef *hrng); /*!< pointer to a common RNG callback function */
|
||||
typedef void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t random32bit); /*!< pointer to an RNG Data Ready specific callback function */
|
||||
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup RNG_Exported_Constants RNG Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition
|
||||
* @{
|
||||
*/
|
||||
#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */
|
||||
#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */
|
||||
#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition
|
||||
* @{
|
||||
*/
|
||||
#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */
|
||||
#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */
|
||||
#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Error_Definition RNG Error Definition
|
||||
* @{
|
||||
*/
|
||||
#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */
|
||||
#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */
|
||||
#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */
|
||||
#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup RNG_Exported_Macros RNG Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset RNG handle state
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_RNG_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0U)
|
||||
#else
|
||||
#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
|
||||
#endif /*USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @brief Enables the RNG peripheral.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN)
|
||||
|
||||
/**
|
||||
* @brief Disables the RNG peripheral.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
|
||||
|
||||
/**
|
||||
* @brief Check the selected RNG flag status.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @param __FLAG__ RNG flag
|
||||
* This parameter can be one of the following values:
|
||||
* @arg RNG_FLAG_DRDY: Data ready
|
||||
* @arg RNG_FLAG_CECS: Clock error current status
|
||||
* @arg RNG_FLAG_SECS: Seed error current status
|
||||
* @retval The new state of __FLAG__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/**
|
||||
* @brief Clears the selected RNG flag status.
|
||||
* @param __HANDLE__ RNG handle
|
||||
* @param __FLAG__ RNG flag to clear
|
||||
* @note WARNING: This is a dummy macro for HAL code alignment,
|
||||
* flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */
|
||||
|
||||
/**
|
||||
* @brief Enables the RNG interrupts.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE)
|
||||
|
||||
/**
|
||||
* @brief Disables the RNG interrupts.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
|
||||
|
||||
/**
|
||||
* @brief Checks whether the specified RNG interrupt has occurred or not.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @param __INTERRUPT__ specifies the RNG interrupt status flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg RNG_IT_DRDY: Data ready interrupt
|
||||
* @arg RNG_IT_CEI: Clock error interrupt
|
||||
* @arg RNG_IT_SEI: Seed error interrupt
|
||||
* @retval The new state of __INTERRUPT__ (SET or RESET).
|
||||
*/
|
||||
#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Clear the RNG interrupt status flags.
|
||||
* @param __HANDLE__ RNG Handle
|
||||
* @param __INTERRUPT__ specifies the RNG interrupt status flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg RNG_IT_CEI: Clock error interrupt
|
||||
* @arg RNG_IT_SEI: Seed error interrupt
|
||||
* @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup RNG_Exported_Functions RNG Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions
|
||||
* @{
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
|
||||
HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID);
|
||||
|
||||
HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_RNG_UnRegisterReadyDataCallback(RNG_HandleTypeDef *hrng);
|
||||
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */
|
||||
uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
|
||||
HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
|
||||
HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
|
||||
uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
|
||||
|
||||
void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
|
||||
void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
|
||||
uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup RNG_Private_Macros RNG Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
|
||||
((IT) == RNG_IT_SEI))
|
||||
|
||||
#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
|
||||
((FLAG) == RNG_FLAG_CECS) || \
|
||||
((FLAG) == RNG_FLAG_SECS))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* RNG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F4xx_HAL_RNG_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
226
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h
Normal file
226
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h
Normal file
@@ -0,0 +1,226 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_sdram.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SDRAM HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_SDRAM_H
|
||||
#define __STM32F4xx_HAL_SDRAM_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
||||
defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_ll_fmc.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported typedef ----------------------------------------------------------*/
|
||||
/** @defgroup SDRAM_Exported_Types SDRAM Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL SDRAM State structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SDRAM_STATE_RESET = 0x00U, /*!< SDRAM not yet initialized or disabled */
|
||||
HAL_SDRAM_STATE_READY = 0x01U, /*!< SDRAM initialized and ready for use */
|
||||
HAL_SDRAM_STATE_BUSY = 0x02U, /*!< SDRAM internal process is ongoing */
|
||||
HAL_SDRAM_STATE_ERROR = 0x03U, /*!< SDRAM error state */
|
||||
HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04U, /*!< SDRAM device write protected */
|
||||
HAL_SDRAM_STATE_PRECHARGED = 0x05U /*!< SDRAM device precharged */
|
||||
|
||||
} HAL_SDRAM_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SDRAM handle Structure definition
|
||||
*/
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
typedef struct __SDRAM_HandleTypeDef
|
||||
#else
|
||||
typedef struct
|
||||
#endif /* USE_HAL_SDRAM_REGISTER_CALLBACKS */
|
||||
{
|
||||
FMC_SDRAM_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */
|
||||
|
||||
__IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< SDRAM locking object */
|
||||
|
||||
DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
|
||||
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
void (* MspInitCallback) ( struct __SDRAM_HandleTypeDef * hsdram); /*!< SDRAM Msp Init callback */
|
||||
void (* MspDeInitCallback) ( struct __SDRAM_HandleTypeDef * hsdram); /*!< SDRAM Msp DeInit callback */
|
||||
void (* RefreshErrorCallback) ( struct __SDRAM_HandleTypeDef * hsdram); /*!< SDRAM Refresh Error callback */
|
||||
void (* DmaXferCpltCallback) ( DMA_HandleTypeDef * hdma); /*!< SDRAM DMA Xfer Complete callback */
|
||||
void (* DmaXferErrorCallback) ( DMA_HandleTypeDef * hdma); /*!< SDRAM DMA Xfer Error callback */
|
||||
#endif
|
||||
} SDRAM_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL SDRAM Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SDRAM_MSP_INIT_CB_ID = 0x00U, /*!< SDRAM MspInit Callback ID */
|
||||
HAL_SDRAM_MSP_DEINIT_CB_ID = 0x01U, /*!< SDRAM MspDeInit Callback ID */
|
||||
HAL_SDRAM_REFRESH_ERR_CB_ID = 0x02U, /*!< SDRAM Refresh Error Callback ID */
|
||||
HAL_SDRAM_DMA_XFER_CPLT_CB_ID = 0x03U, /*!< SDRAM DMA Xfer Complete Callback ID */
|
||||
HAL_SDRAM_DMA_XFER_ERR_CB_ID = 0x04U /*!< SDRAM DMA Xfer Error Callback ID */
|
||||
}HAL_SDRAM_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SDRAM Callback pointer definition
|
||||
*/
|
||||
typedef void (*pSDRAM_CallbackTypeDef)(SDRAM_HandleTypeDef *hsdram);
|
||||
typedef void (*pSDRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma);
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset SDRAM handle state
|
||||
* @param __HANDLE__ specifies the SDRAM handle.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) do { \
|
||||
(__HANDLE__)->State = HAL_SDRAM_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions *********************************/
|
||||
HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
|
||||
HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
|
||||
|
||||
void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
|
||||
void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
|
||||
void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
|
||||
|
||||
HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
|
||||
HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
|
||||
|
||||
#if (USE_HAL_SDRAM_REGISTER_CALLBACKS == 1)
|
||||
/* SDRAM callback registering/unregistering */
|
||||
HAL_StatusTypeDef HAL_SDRAM_RegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, pSDRAM_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SDRAM_UnRegisterCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId);
|
||||
HAL_StatusTypeDef HAL_SDRAM_RegisterDmaCallback(SDRAM_HandleTypeDef *hsdram, HAL_SDRAM_CallbackIDTypeDef CallbackId, pSDRAM_DmaCallbackTypeDef pCallback);
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* SDRAM Control functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
|
||||
HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
|
||||
HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
|
||||
HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
|
||||
uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SDRAM_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* SDRAM State functions ********************************************************/
|
||||
HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_SDRAM_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
726
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h
Normal file
726
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h
Normal file
@@ -0,0 +1,726 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_spi.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of SPI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_SPI_H
|
||||
#define STM32F4xx_HAL_SPI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup SPI_Exported_Types SPI Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief SPI Configuration Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Mode; /*!< Specifies the SPI operating mode.
|
||||
This parameter can be a value of @ref SPI_Mode */
|
||||
|
||||
uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
|
||||
This parameter can be a value of @ref SPI_Direction */
|
||||
|
||||
uint32_t DataSize; /*!< Specifies the SPI data size.
|
||||
This parameter can be a value of @ref SPI_Data_Size */
|
||||
|
||||
uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
|
||||
This parameter can be a value of @ref SPI_Clock_Polarity */
|
||||
|
||||
uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
|
||||
This parameter can be a value of @ref SPI_Clock_Phase */
|
||||
|
||||
uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
|
||||
hardware (NSS pin) or by software using the SSI bit.
|
||||
This parameter can be a value of @ref SPI_Slave_Select_management */
|
||||
|
||||
uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
|
||||
used to configure the transmit and receive SCK clock.
|
||||
This parameter can be a value of @ref SPI_BaudRate_Prescaler
|
||||
@note The communication clock is derived from the master
|
||||
clock. The slave clock does not need to be set. */
|
||||
|
||||
uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
|
||||
This parameter can be a value of @ref SPI_MSB_LSB_transmission */
|
||||
|
||||
uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
|
||||
This parameter can be a value of @ref SPI_TI_mode */
|
||||
|
||||
uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
|
||||
This parameter can be a value of @ref SPI_CRC_Calculation */
|
||||
|
||||
uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
|
||||
This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */
|
||||
} SPI_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SPI State structure definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
|
||||
HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
|
||||
HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
|
||||
HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
|
||||
HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
|
||||
HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
|
||||
HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */
|
||||
HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */
|
||||
} HAL_SPI_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief SPI handle Structure definition
|
||||
*/
|
||||
typedef struct __SPI_HandleTypeDef
|
||||
{
|
||||
SPI_TypeDef *Instance; /*!< SPI registers base address */
|
||||
|
||||
SPI_InitTypeDef Init; /*!< SPI communication parameters */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
|
||||
|
||||
uint16_t TxXferSize; /*!< SPI Tx Transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
|
||||
|
||||
uint16_t RxXferSize; /*!< SPI Rx Transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
|
||||
|
||||
void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */
|
||||
|
||||
void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< SPI Error code */
|
||||
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */
|
||||
void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */
|
||||
void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */
|
||||
void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */
|
||||
void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */
|
||||
void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */
|
||||
void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */
|
||||
void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */
|
||||
void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */
|
||||
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
} SPI_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
/**
|
||||
* @brief HAL SPI Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */
|
||||
HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */
|
||||
HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */
|
||||
HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */
|
||||
HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */
|
||||
HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */
|
||||
HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */
|
||||
HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */
|
||||
HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */
|
||||
HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */
|
||||
|
||||
} HAL_SPI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL SPI Callback pointer definition
|
||||
*/
|
||||
typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */
|
||||
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup SPI_Exported_Constants SPI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Error_Code SPI Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */
|
||||
#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */
|
||||
#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */
|
||||
#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */
|
||||
#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */
|
||||
#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
|
||||
#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY Flag */
|
||||
#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Mode SPI Mode
|
||||
* @{
|
||||
*/
|
||||
#define SPI_MODE_SLAVE (0x00000000U)
|
||||
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Direction SPI Direction Mode
|
||||
* @{
|
||||
*/
|
||||
#define SPI_DIRECTION_2LINES (0x00000000U)
|
||||
#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
|
||||
#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Data_Size SPI Data Size
|
||||
* @{
|
||||
*/
|
||||
#define SPI_DATASIZE_8BIT (0x00000000U)
|
||||
#define SPI_DATASIZE_16BIT SPI_CR1_DFF
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
|
||||
* @{
|
||||
*/
|
||||
#define SPI_POLARITY_LOW (0x00000000U)
|
||||
#define SPI_POLARITY_HIGH SPI_CR1_CPOL
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Clock_Phase SPI Clock Phase
|
||||
* @{
|
||||
*/
|
||||
#define SPI_PHASE_1EDGE (0x00000000U)
|
||||
#define SPI_PHASE_2EDGE SPI_CR1_CPHA
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
|
||||
* @{
|
||||
*/
|
||||
#define SPI_NSS_SOFT SPI_CR1_SSM
|
||||
#define SPI_NSS_HARD_INPUT (0x00000000U)
|
||||
#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
|
||||
* @{
|
||||
*/
|
||||
#define SPI_BAUDRATEPRESCALER_2 (0x00000000U)
|
||||
#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0)
|
||||
#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1)
|
||||
#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0)
|
||||
#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2)
|
||||
#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0)
|
||||
#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1)
|
||||
#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
|
||||
* @{
|
||||
*/
|
||||
#define SPI_FIRSTBIT_MSB (0x00000000U)
|
||||
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_TI_mode SPI TI Mode
|
||||
* @{
|
||||
*/
|
||||
#define SPI_TIMODE_DISABLE (0x00000000U)
|
||||
#define SPI_TIMODE_ENABLE SPI_CR2_FRF
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
|
||||
* @{
|
||||
*/
|
||||
#define SPI_CRCCALCULATION_DISABLE (0x00000000U)
|
||||
#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
|
||||
* @{
|
||||
*/
|
||||
#define SPI_IT_TXE SPI_CR2_TXEIE
|
||||
#define SPI_IT_RXNE SPI_CR2_RXNEIE
|
||||
#define SPI_IT_ERR SPI_CR2_ERRIE
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup SPI_Flags_definition SPI Flags Definition
|
||||
* @{
|
||||
*/
|
||||
#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
|
||||
#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
|
||||
#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
|
||||
#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
|
||||
#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
|
||||
#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
|
||||
#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
|
||||
#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\
|
||||
| SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup SPI_Exported_Macros SPI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset SPI handle state.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->State = HAL_SPI_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0)
|
||||
#else
|
||||
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Enable the specified SPI interrupts.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
||||
|
||||
/** @brief Disable the specified SPI interrupts.
|
||||
* @param __HANDLE__ specifies the SPI handle.
|
||||
* This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __INTERRUPT__ specifies the interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
||||
|
||||
/** @brief Check whether the specified SPI interrupt source is enabled or not.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __INTERRUPT__ specifies the SPI interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
|
||||
& (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Check whether the specified SPI flag is set or not.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
|
||||
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
|
||||
* @arg SPI_FLAG_CRCERR: CRC error flag
|
||||
* @arg SPI_FLAG_MODF: Mode fault flag
|
||||
* @arg SPI_FLAG_OVR: Overrun flag
|
||||
* @arg SPI_FLAG_BSY: Busy flag
|
||||
* @arg SPI_FLAG_FRE: Frame format error flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the SPI CRCERR pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
|
||||
|
||||
/** @brief Clear the SPI MODF pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg_modf = 0x00U; \
|
||||
tmpreg_modf = (__HANDLE__)->Instance->SR; \
|
||||
CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
|
||||
UNUSED(tmpreg_modf); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clear the SPI OVR pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg_ovr = 0x00U; \
|
||||
tmpreg_ovr = (__HANDLE__)->Instance->DR; \
|
||||
tmpreg_ovr = (__HANDLE__)->Instance->SR; \
|
||||
UNUSED(tmpreg_ovr); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clear the SPI FRE pending flag.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg_fre = 0x00U; \
|
||||
tmpreg_fre = (__HANDLE__)->Instance->SR; \
|
||||
UNUSED(tmpreg_fre); \
|
||||
}while(0U)
|
||||
|
||||
/** @brief Enable the SPI peripheral.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
|
||||
|
||||
/** @brief Disable the SPI peripheral.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup SPI_Private_Macros SPI Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Set the SPI transmit-only mode.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
|
||||
|
||||
/** @brief Set the SPI receive-only mode.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
|
||||
|
||||
/** @brief Reset the CRC calculation of the SPI.
|
||||
* @param __HANDLE__ specifies the SPI Handle.
|
||||
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
||||
* @retval None
|
||||
*/
|
||||
#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
|
||||
SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
|
||||
|
||||
/** @brief Check whether the specified SPI flag is set or not.
|
||||
* @param __SR__ copy of SPI SR regsiter.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
|
||||
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
|
||||
* @arg SPI_FLAG_CRCERR: CRC error flag
|
||||
* @arg SPI_FLAG_MODF: Mode fault flag
|
||||
* @arg SPI_FLAG_OVR: Overrun flag
|
||||
* @arg SPI_FLAG_BSY: Busy flag
|
||||
* @arg SPI_FLAG_FRE: Frame format error flag
|
||||
* @retval SET or RESET.
|
||||
*/
|
||||
#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET)
|
||||
|
||||
/** @brief Check whether the specified SPI Interrupt is set or not.
|
||||
* @param __CR2__ copy of SPI CR2 regsiter.
|
||||
* @param __INTERRUPT__ specifies the SPI interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
||||
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
||||
* @arg SPI_IT_ERR: Error interrupt enable
|
||||
* @retval SET or RESET.
|
||||
*/
|
||||
#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/** @brief Checks if SPI Mode parameter is in allowed range.
|
||||
* @param __MODE__ specifies the SPI Mode.
|
||||
* This parameter can be a value of @ref SPI_Mode
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \
|
||||
((__MODE__) == SPI_MODE_MASTER))
|
||||
|
||||
/** @brief Checks if SPI Direction Mode parameter is in allowed range.
|
||||
* @param __MODE__ specifies the SPI Direction Mode.
|
||||
* This parameter can be a value of @ref SPI_Direction
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
|
||||
((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
|
||||
((__MODE__) == SPI_DIRECTION_1LINE))
|
||||
|
||||
/** @brief Checks if SPI Direction Mode parameter is 2 lines.
|
||||
* @param __MODE__ specifies the SPI Direction Mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
|
||||
|
||||
/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
|
||||
* @param __MODE__ specifies the SPI Direction Mode.
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
|
||||
((__MODE__) == SPI_DIRECTION_1LINE))
|
||||
|
||||
/** @brief Checks if SPI Data Size parameter is in allowed range.
|
||||
* @param __DATASIZE__ specifies the SPI Data Size.
|
||||
* This parameter can be a value of @ref SPI_Data_Size
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
|
||||
((__DATASIZE__) == SPI_DATASIZE_8BIT))
|
||||
|
||||
/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
|
||||
* @param __CPOL__ specifies the SPI serial clock steady state.
|
||||
* This parameter can be a value of @ref SPI_Clock_Polarity
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
|
||||
((__CPOL__) == SPI_POLARITY_HIGH))
|
||||
|
||||
/** @brief Checks if SPI Clock Phase parameter is in allowed range.
|
||||
* @param __CPHA__ specifies the SPI Clock Phase.
|
||||
* This parameter can be a value of @ref SPI_Clock_Phase
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
|
||||
((__CPHA__) == SPI_PHASE_2EDGE))
|
||||
|
||||
/** @brief Checks if SPI Slave Select parameter is in allowed range.
|
||||
* @param __NSS__ specifies the SPI Slave Select management parameter.
|
||||
* This parameter can be a value of @ref SPI_Slave_Select_management
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
|
||||
((__NSS__) == SPI_NSS_HARD_INPUT) || \
|
||||
((__NSS__) == SPI_NSS_HARD_OUTPUT))
|
||||
|
||||
/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
|
||||
* @param __PRESCALER__ specifies the SPI Baudrate prescaler.
|
||||
* This parameter can be a value of @ref SPI_BaudRate_Prescaler
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
|
||||
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
|
||||
|
||||
/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
|
||||
* @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
|
||||
* This parameter can be a value of @ref SPI_MSB_LSB_transmission
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
|
||||
((__BIT__) == SPI_FIRSTBIT_LSB))
|
||||
|
||||
/** @brief Checks if SPI TI mode parameter is in allowed range.
|
||||
* @param __MODE__ specifies the SPI TI mode.
|
||||
* This parameter can be a value of @ref SPI_TI_mode
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \
|
||||
((__MODE__) == SPI_TIMODE_ENABLE))
|
||||
|
||||
/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
|
||||
* @param __CALCULATION__ specifies the SPI CRC calculation enable state.
|
||||
* This parameter can be a value of @ref SPI_CRC_Calculation
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
|
||||
((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
|
||||
|
||||
/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
|
||||
* @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
|
||||
* This parameter must be a number between Min_Data = 0 and Max_Data = 65535
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && ((__POLYNOMIAL__) <= 0xFFFFU) && (((__POLYNOMIAL__)&0x1U) != 0U))
|
||||
|
||||
/** @brief Checks if DMA handle is valid.
|
||||
* @param __HANDLE__ specifies a DMA Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup SPI_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI_Exported_Functions_Group1
|
||||
* @{
|
||||
*/
|
||||
/* Initialization/de-initialization functions ********************************/
|
||||
HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
|
||||
HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI_Exported_Functions_Group2
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions ***************************************************/
|
||||
HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
|
||||
uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
|
||||
uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
|
||||
/* Transfer Abort functions */
|
||||
HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi);
|
||||
HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi);
|
||||
|
||||
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
|
||||
void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup SPI_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State and Error functions ***************************************/
|
||||
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
|
||||
uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32F4xx_HAL_SPI_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
2030
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h
Normal file
2030
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h
Normal file
File diff suppressed because it is too large
Load Diff
356
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h
Normal file
356
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h
Normal file
@@ -0,0 +1,356 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_tim_ex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of TIM HAL Extended module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32F4xx_HAL_TIM_EX_H
|
||||
#define STM32F4xx_HAL_TIM_EX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief TIM Hall sensor Configuration Structure definition
|
||||
*/
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
||||
|
||||
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
||||
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
||||
|
||||
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
||||
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
||||
|
||||
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
||||
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
||||
} TIM_HallSensor_InitTypeDef;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported types -----------------------------------------------------*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
||||
* @{
|
||||
*/
|
||||
#if defined (TIM2)
|
||||
#if defined(TIM8)
|
||||
#define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */
|
||||
#else
|
||||
#define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */
|
||||
#endif /* TIM8 */
|
||||
#define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */
|
||||
#define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */
|
||||
#endif /* TIM2 */
|
||||
|
||||
#define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */
|
||||
#define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */
|
||||
#define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */
|
||||
#define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */
|
||||
|
||||
#define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */
|
||||
#define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */
|
||||
#if defined(SPDIFRX)
|
||||
#define TIM_TIM11_SPDIFRX TIM_OR_TI1_RMP_0 /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */
|
||||
#endif /* SPDIFRX*/
|
||||
|
||||
#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
|
||||
#define LPTIM_REMAP_MASK 0x10000000U
|
||||
|
||||
#define TIM_TIM9_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM9 ITR1 is connected to TIM3 TRGO */
|
||||
#define TIM_TIM9_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP) /*!< TIM9 ITR1 is connected to LPTIM1 output */
|
||||
|
||||
#define TIM_TIM5_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM5 ITR1 is connected to TIM3 TRGO */
|
||||
#define TIM_TIM5_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP) /*!< TIM5 ITR1 is connected to LPTIM1 output */
|
||||
|
||||
#define TIM_TIM1_TIM3_TRGO LPTIM_REMAP_MASK /*!< TIM1 ITR2 is connected to TIM3 TRGO */
|
||||
#define TIM_TIM1_LPTIM (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP) /*!< TIM1 ITR2 is connected to LPTIM1 output */
|
||||
#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported constants -------------------------------------------------*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported macro -----------------------------------------------------*/
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#if defined(SPDIFRX)
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_SPDIFRX) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#elif defined(TIM2)
|
||||
#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))) || \
|
||||
(((INSTANCE) == TIM1) && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM1_LPTIM))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LPTIM))) || \
|
||||
(((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM9_LPTIM))))
|
||||
#elif defined(TIM8)
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#else
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETH_PTP) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \
|
||||
((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \
|
||||
(((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
|
||||
#else
|
||||
#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \
|
||||
((((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSI) || \
|
||||
((TIM_REMAP) == TIM_TIM5_LSE) || \
|
||||
((TIM_REMAP) == TIM_TIM5_RTC))) || \
|
||||
(((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \
|
||||
((TIM_REMAP) == TIM_TIM11_HSE))))
|
||||
#endif /* SPDIFRX */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private macro ------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
|
||||
* @brief Timer Hall Sensor functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Hall Sensor functions **********************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
|
||||
* @brief Timer Complementary Output Compare functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary Output Compare functions *****************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
|
||||
* @brief Timer Complementary PWM functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary PWM functions ****************************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/* Non-Blocking mode: DMA */
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
||||
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
|
||||
* @brief Timer Complementary One Pulse functions
|
||||
* @{
|
||||
*/
|
||||
/* Timer Complementary One Pulse functions **********************************/
|
||||
/* Blocking mode: Polling */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
|
||||
/* Non-Blocking mode: Interrupt */
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
||||
* @brief Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
|
||||
uint32_t CommutationSource);
|
||||
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
|
||||
TIM_MasterConfigTypeDef *sMasterConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
|
||||
TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
||||
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
|
||||
* @brief Extended Callbacks functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Callback **********************************************************/
|
||||
void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
|
||||
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
|
||||
* @brief Extended Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Extended Peripheral State functions ***************************************/
|
||||
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of exported functions -------------------------------------------------*/
|
||||
|
||||
/* Private functions----------------------------------------------------------*/
|
||||
/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
|
||||
* @{
|
||||
*/
|
||||
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
||||
void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* End of private functions --------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* STM32F4xx_HAL_TIM_EX_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
846
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h
Normal file
846
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h
Normal file
@@ -0,0 +1,846 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_uart.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UART HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_UART_H
|
||||
#define __STM32F4xx_HAL_UART_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UART
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UART_Exported_Types UART Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief UART Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
|
||||
The baud rate is computed using the following formula:
|
||||
- IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
|
||||
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
|
||||
Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
|
||||
|
||||
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
||||
This parameter can be a value of @ref UART_Word_Length */
|
||||
|
||||
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
|
||||
This parameter can be a value of @ref UART_Stop_Bits */
|
||||
|
||||
uint32_t Parity; /*!< Specifies the parity mode.
|
||||
This parameter can be a value of @ref UART_Parity
|
||||
@note When parity is enabled, the computed parity is inserted
|
||||
at the MSB position of the transmitted data (9th bit when
|
||||
the word length is set to 9 data bits; 8th bit when the
|
||||
word length is set to 8 data bits). */
|
||||
|
||||
uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
|
||||
This parameter can be a value of @ref UART_Mode */
|
||||
|
||||
uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
|
||||
This parameter can be a value of @ref UART_Hardware_Flow_Control */
|
||||
|
||||
uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
|
||||
This parameter can be a value of @ref UART_Over_Sampling */
|
||||
} UART_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL UART State structures definition
|
||||
* @note HAL UART State value is a combination of 2 different substates: gState and RxState.
|
||||
* - gState contains UART state information related to global Handle management
|
||||
* and also information related to Tx operations.
|
||||
* gState value coding follow below described bitmap :
|
||||
* b7-b6 Error information
|
||||
* 00 : No Error
|
||||
* 01 : (Not Used)
|
||||
* 10 : Timeout
|
||||
* 11 : Error
|
||||
* b5 Peripheral initialization status
|
||||
* 0 : Reset (Peripheral not initialized)
|
||||
* 1 : Init done (Peripheral not initialized. HAL UART Init function already called)
|
||||
* b4-b3 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b2 Intrinsic process state
|
||||
* 0 : Ready
|
||||
* 1 : Busy (Peripheral busy with some configuration or internal operations)
|
||||
* b1 (not used)
|
||||
* x : Should be set to 0
|
||||
* b0 Tx state
|
||||
* 0 : Ready (no Tx operation ongoing)
|
||||
* 1 : Busy (Tx operation ongoing)
|
||||
* - RxState contains information related to Rx operations.
|
||||
* RxState value coding follow below described bitmap :
|
||||
* b7-b6 (not used)
|
||||
* xx : Should be set to 00
|
||||
* b5 Peripheral initialization status
|
||||
* 0 : Reset (Peripheral not initialized)
|
||||
* 1 : Init done (Peripheral not initialized)
|
||||
* b4-b2 (not used)
|
||||
* xxx : Should be set to 000
|
||||
* b1 Rx state
|
||||
* 0 : Ready (no Rx operation ongoing)
|
||||
* 1 : Busy (Rx operation ongoing)
|
||||
* b0 (not used)
|
||||
* x : Should be set to 0.
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UART_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_UART_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
|
||||
Value is allowed for gState and RxState */
|
||||
HAL_UART_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_UART_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
|
||||
Value is allowed for gState only */
|
||||
HAL_UART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
|
||||
Value is allowed for RxState only */
|
||||
HAL_UART_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
|
||||
Not to be used for neither gState nor RxState.
|
||||
Value is result of combination (Or) between gState and RxState values */
|
||||
HAL_UART_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
|
||||
Value is allowed for gState only */
|
||||
HAL_UART_STATE_ERROR = 0xE0U /*!< Error
|
||||
Value is allowed for gState only */
|
||||
} HAL_UART_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief UART handle Structure definition
|
||||
*/
|
||||
typedef struct __UART_HandleTypeDef
|
||||
{
|
||||
USART_TypeDef *Instance; /*!< UART registers base address */
|
||||
|
||||
UART_InitTypeDef Init; /*!< UART communication parameters */
|
||||
|
||||
uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
|
||||
|
||||
uint16_t TxXferSize; /*!< UART Tx Transfer size */
|
||||
|
||||
__IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
|
||||
|
||||
uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
|
||||
|
||||
uint16_t RxXferSize; /*!< UART Rx Transfer size */
|
||||
|
||||
__IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
|
||||
|
||||
DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
|
||||
|
||||
DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< Locking object */
|
||||
|
||||
__IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
|
||||
and also related to Tx operations.
|
||||
This parameter can be a value of @ref HAL_UART_StateTypeDef */
|
||||
|
||||
__IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
|
||||
This parameter can be a value of @ref HAL_UART_StateTypeDef */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< UART Error code */
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */
|
||||
void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */
|
||||
void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */
|
||||
void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */
|
||||
void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */
|
||||
void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */
|
||||
void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
|
||||
void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */
|
||||
void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */
|
||||
|
||||
void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */
|
||||
void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
} UART_HandleTypeDef;
|
||||
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
/**
|
||||
* @brief HAL UART Callback ID enumeration definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */
|
||||
HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */
|
||||
HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */
|
||||
HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */
|
||||
HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */
|
||||
HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */
|
||||
HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */
|
||||
HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */
|
||||
HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */
|
||||
|
||||
HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */
|
||||
HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */
|
||||
|
||||
} HAL_UART_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief HAL UART Callback pointer definition
|
||||
*/
|
||||
typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
|
||||
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UART_Exported_Constants UART Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Error_Code UART Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_UART_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_UART_ERROR_PE 0x00000001U /*!< Parity error */
|
||||
#define HAL_UART_ERROR_NE 0x00000002U /*!< Noise error */
|
||||
#define HAL_UART_ERROR_FE 0x00000004U /*!< Frame error */
|
||||
#define HAL_UART_ERROR_ORE 0x00000008U /*!< Overrun error */
|
||||
#define HAL_UART_ERROR_DMA 0x00000010U /*!< DMA transfer error */
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
#define HAL_UART_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Word_Length UART Word Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_WORDLENGTH_8B 0x00000000U
|
||||
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
|
||||
* @{
|
||||
*/
|
||||
#define UART_STOPBITS_1 0x00000000U
|
||||
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Parity UART Parity
|
||||
* @{
|
||||
*/
|
||||
#define UART_PARITY_NONE 0x00000000U
|
||||
#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
||||
#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
|
||||
* @{
|
||||
*/
|
||||
#define UART_HWCONTROL_NONE 0x00000000U
|
||||
#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
|
||||
#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
|
||||
#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Mode UART Transfer Mode
|
||||
* @{
|
||||
*/
|
||||
#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
|
||||
#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
|
||||
#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE | USART_CR1_RE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_State UART State
|
||||
* @{
|
||||
*/
|
||||
#define UART_STATE_DISABLE 0x00000000U
|
||||
#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Over_Sampling UART Over Sampling
|
||||
* @{
|
||||
*/
|
||||
#define UART_OVERSAMPLING_16 0x00000000U
|
||||
#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
|
||||
* @{
|
||||
*/
|
||||
#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U
|
||||
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_WakeUp_functions UART Wakeup Functions
|
||||
* @{
|
||||
*/
|
||||
#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U
|
||||
#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Flags UART FLags
|
||||
* Elements values convention: 0xXXXX
|
||||
* - 0xXXXX : Flag mask in the SR register
|
||||
* @{
|
||||
*/
|
||||
#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
|
||||
#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
|
||||
#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
|
||||
#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
|
||||
#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
|
||||
#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
|
||||
#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
|
||||
#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
|
||||
#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
|
||||
#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
|
||||
* Elements values convention: 0xY000XXXX
|
||||
* - XXXX : Interrupt mask (16 bits) in the Y register
|
||||
* - Y : Interrupt source register (2bits)
|
||||
* - 0001: CR1 register
|
||||
* - 0010: CR2 register
|
||||
* - 0011: CR3 register
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_PEIE))
|
||||
#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TXEIE))
|
||||
#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_TCIE))
|
||||
#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE))
|
||||
#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE))
|
||||
|
||||
#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28U | USART_CR2_LBDIE))
|
||||
|
||||
#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_CTSIE))
|
||||
#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28U | USART_CR3_EIE))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup UART_Exported_Macros UART Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset UART handle gstate & RxState
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
|
||||
(__HANDLE__)->MspInitCallback = NULL; \
|
||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
||||
} while(0U)
|
||||
#else
|
||||
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
||||
(__HANDLE__)->gState = HAL_UART_STATE_RESET; \
|
||||
(__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
|
||||
} while(0U)
|
||||
#endif /*USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/** @brief Flushes the UART DR register
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
*/
|
||||
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
|
||||
|
||||
/** @brief Checks whether the specified UART flag is set or not.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
|
||||
* @arg UART_FLAG_LBD: LIN Break detection flag
|
||||
* @arg UART_FLAG_TXE: Transmit data register empty flag
|
||||
* @arg UART_FLAG_TC: Transmission Complete flag
|
||||
* @arg UART_FLAG_RXNE: Receive data register not empty flag
|
||||
* @arg UART_FLAG_IDLE: Idle Line detection flag
|
||||
* @arg UART_FLAG_ORE: Overrun Error flag
|
||||
* @arg UART_FLAG_NE: Noise Error flag
|
||||
* @arg UART_FLAG_FE: Framing Error flag
|
||||
* @arg UART_FLAG_PE: Parity Error flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clears the specified UART pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be any combination of the following values:
|
||||
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
|
||||
* @arg UART_FLAG_LBD: LIN Break detection flag.
|
||||
* @arg UART_FLAG_TC: Transmission Complete flag.
|
||||
* @arg UART_FLAG_RXNE: Receive data register not empty flag.
|
||||
*
|
||||
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
|
||||
* error) and IDLE (Idle line detected) flags are cleared by software
|
||||
* sequence: a read operation to USART_SR register followed by a read
|
||||
* operation to USART_DR register.
|
||||
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
||||
* @note TC flag can be also cleared by software sequence: a read operation to
|
||||
* USART_SR register followed by a write operation to USART_DR register.
|
||||
* @note TXE flag is cleared only by a write to the USART_DR register.
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
||||
|
||||
/** @brief Clears the UART PE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
|
||||
do{ \
|
||||
__IO uint32_t tmpreg = 0x00U; \
|
||||
tmpreg = (__HANDLE__)->Instance->SR; \
|
||||
tmpreg = (__HANDLE__)->Instance->DR; \
|
||||
UNUSED(tmpreg); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Clears the UART FE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clears the UART NE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clears the UART ORE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Clears the UART IDLE pending flag.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
||||
|
||||
/** @brief Enable the specified UART interrupt.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __INTERRUPT__ specifies the UART interrupt source to enable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_IT_CTS: CTS change interrupt
|
||||
* @arg UART_IT_LBD: LIN Break detection interrupt
|
||||
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg UART_IT_TC: Transmission complete interrupt
|
||||
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg UART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg UART_IT_PE: Parity Error interrupt
|
||||
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
|
||||
|
||||
/** @brief Disable the specified UART interrupt.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __INTERRUPT__ specifies the UART interrupt source to disable.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_IT_CTS: CTS change interrupt
|
||||
* @arg UART_IT_LBD: LIN Break detection interrupt
|
||||
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg UART_IT_TC: Transmission complete interrupt
|
||||
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg UART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg UART_IT_PE: Parity Error interrupt
|
||||
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
(((__INTERRUPT__) >> 28U) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
||||
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
|
||||
|
||||
/** @brief Checks whether the specified UART interrupt source is enabled or not.
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* UART Handle selects the USARTx or UARTy peripheral
|
||||
* (USART,UART availability and x,y values depending on device).
|
||||
* @param __IT__ specifies the UART interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
|
||||
* @arg UART_IT_LBD: LIN Break detection interrupt
|
||||
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
||||
* @arg UART_IT_TC: Transmission complete interrupt
|
||||
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
||||
* @arg UART_IT_IDLE: Idle line detection interrupt
|
||||
* @arg UART_IT_ERR: Error interrupt
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == UART_CR2_REG_INDEX)? \
|
||||
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
|
||||
|
||||
/** @brief Enable CTS flow control
|
||||
* @note This macro allows to enable CTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
|
||||
do{ \
|
||||
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
||||
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Disable CTS flow control
|
||||
* @note This macro allows to disable CTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
|
||||
do{ \
|
||||
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
||||
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Enable RTS flow control
|
||||
* This macro allows to enable RTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
|
||||
do{ \
|
||||
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
|
||||
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Disable RTS flow control
|
||||
* This macro allows to disable RTS hardware flow control for a given UART instance,
|
||||
* without need to call HAL_UART_Init() function.
|
||||
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
||||
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
||||
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
||||
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
||||
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
||||
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* The Handle Instance can be any USARTx (supporting the HW Flow control feature).
|
||||
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
|
||||
do{ \
|
||||
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
|
||||
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
|
||||
} while(0U)
|
||||
|
||||
/** @brief Macro to enable the UART's one bit sample method
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
|
||||
|
||||
/** @brief Macro to disable the UART's one bit sample method
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
|
||||
|
||||
/** @brief Enable UART
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
||||
|
||||
/** @brief Disable UART
|
||||
* @param __HANDLE__ specifies the UART Handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup UART_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Initialization/de-initialization functions **********************************/
|
||||
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
|
||||
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
|
||||
HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
|
||||
|
||||
/* Callbacks Register/UnRegister functions ***********************************/
|
||||
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
|
||||
HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback);
|
||||
HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
|
||||
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* IO operation functions *******************************************************/
|
||||
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
||||
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
|
||||
/* Transfer Abort functions */
|
||||
HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
|
||||
|
||||
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
|
||||
void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group3
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions ************************************************/
|
||||
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
|
||||
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup UART_Exported_Functions_Group4
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State functions **************************************************/
|
||||
HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
|
||||
uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup UART_Private_Constants UART Private Constants
|
||||
* @{
|
||||
*/
|
||||
/** @brief UART interruptions flag mask
|
||||
*
|
||||
*/
|
||||
#define UART_IT_MASK 0x0000FFFFU
|
||||
|
||||
#define UART_CR1_REG_INDEX 1U
|
||||
#define UART_CR2_REG_INDEX 2U
|
||||
#define UART_CR3_REG_INDEX 3U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UART_Private_Macros UART Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
|
||||
((LENGTH) == UART_WORDLENGTH_9B))
|
||||
#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
|
||||
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
|
||||
((STOPBITS) == UART_STOPBITS_2))
|
||||
#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
|
||||
((PARITY) == UART_PARITY_EVEN) || \
|
||||
((PARITY) == UART_PARITY_ODD))
|
||||
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
|
||||
(((CONTROL) == UART_HWCONTROL_NONE) || \
|
||||
((CONTROL) == UART_HWCONTROL_RTS) || \
|
||||
((CONTROL) == UART_HWCONTROL_CTS) || \
|
||||
((CONTROL) == UART_HWCONTROL_RTS_CTS))
|
||||
#define IS_UART_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00U))
|
||||
#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
|
||||
((STATE) == UART_STATE_ENABLE))
|
||||
#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
|
||||
((SAMPLING) == UART_OVERSAMPLING_8))
|
||||
#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
|
||||
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
|
||||
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
|
||||
#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
|
||||
((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
|
||||
#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) <= 10500000U)
|
||||
#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0x0FU)
|
||||
|
||||
#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(4U*((uint64_t)(_BAUD_)))))
|
||||
#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100U)
|
||||
#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U)
|
||||
/* UART BRR = mantissa + overflow + fraction
|
||||
= (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */
|
||||
#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4U) + \
|
||||
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0U) + \
|
||||
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0FU))
|
||||
|
||||
#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) ((uint32_t)((((uint64_t)(_PCLK_))*25U)/(2U*((uint64_t)(_BAUD_)))))
|
||||
#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100U)
|
||||
#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) ((((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100U)) * 8U) + 50U) / 100U)
|
||||
/* UART BRR = mantissa + overflow + fraction
|
||||
= (UART DIVMANT << 4) + ((UART DIVFRAQ & 0xF8) << 1) + (UART DIVFRAQ & 0x07U) */
|
||||
#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4U) + \
|
||||
((UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0xF8U) << 1U) + \
|
||||
(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x07U))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @defgroup UART_Private_Functions UART Private Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_UART_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
1403
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h
Normal file
1403
Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h
Normal file
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user