William Miceli
31e0b7c39f
Added Test Point and USB Connector components
...
5015 and USBR-B-S-S-O-TH
2021-03-20 20:11:29 -04:00
William Miceli
cfa2c71c37
Created Part No. 30314-6002HB for JTAG Header
2021-03-20 19:39:40 -04:00
William Miceli
ff49e586b2
Finished Symbol/Footprint for TPS613785QWRTERQ1
2021-03-20 18:32:50 -04:00
William Miceli
93017e1351
Added 3D models to OSRAM LED lights
2021-03-20 18:21:21 -04:00
William Miceli
1c09dc0046
Finished ESP32-WROVER-IE footprint and model
2021-03-20 17:50:47 -04:00
Noah Bishop
a04c7e0efa
Added a File for SMP documentation and a potential Buck package
2021-03-18 09:28:18 -04:00
Noah Bishop
98bfebf4ce
Added Input/Output Capacitor Sizing Guide to Resources>>Misc
2021-03-16 21:16:13 -04:00
William Miceli
aac8e096fd
Finished all changed mentioned by Dr. Bazuin
...
Implemented voltage-level translators for the IMU and it's 1.8V requirements; All components are now sized 0805 or larger; Test points have been fixed; all ICs that need bypass capacitors have them; etc.
2021-03-15 22:47:39 -04:00
William Miceli
31107ef0c9
Removing FETs on Inertial Measurement Unit
...
[Still in progress]
Switching out FETs with dedicated ICs to translate the voltage levels to simplify things a bit.
2021-03-15 20:19:47 -04:00
William Miceli
c816560942
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
William Miceli
12d8e2657d
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
William Miceli
d75aa68481
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
William Miceli
f343124d3b
IMU is now fully complete, with it's own LDO Regulator, Voltage-Level Shifters and real parts specified
2021-03-06 22:46:32 -05:00
William Miceli
4aed3b3593
Updated documentation with component changes to have everything use 3.3V
2021-03-06 20:08:34 -05:00
William Miceli
24f9c5ef31
Added top-actuated switch for reset button
2021-03-04 00:32:00 -05:00
William Miceli
8341212f12
Status LEDs are complete, with specific parts chosen
2021-03-02 23:57:15 -05:00
William Miceli
e655395fcd
Changed out P-Channel MOSFETs used for switching lights to more efficient models and added their symbol/footprint/model: PSMN9R5-30YLC,115
2021-03-02 22:33:28 -05:00
William Miceli
3e8b871d75
Added supercapacitor schematic/footprint/model to library
2021-02-25 17:39:00 -05:00
William Miceli
d23d94372a
GPS Receiver is finished!
2021-02-20 21:32:20 -05:00
William Miceli
341265928e
Added right angle SMB connector for GPS antenna
2021-02-20 20:03:04 -05:00
William Miceli
86f7ca3fc8
GPS Receiver now has isolated USB interface available
2021-02-20 17:54:57 -05:00
William Miceli
7992de6f6d
Added more documentation and examples
2021-02-19 21:25:53 -05:00
William Miceli
5ff8d8a8f1
Updated documentation
2021-02-19 19:36:24 -05:00
William Miceli
ec5f5100a2
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
William Miceli
9c6134e115
Added official guidelines for ESP32 hardware design
2021-02-19 16:57:53 -05:00
William Miceli
1042379d53
I2C Voltage-Level Translator no longer needed
2021-02-16 22:01:54 -05:00
William Miceli
b815593136
Cleanup and additional parts
2021-02-16 20:42:54 -05:00
William Miceli
8aadd93f05
Upgrading component from 6-axis to 9-axis IMU
2021-02-16 20:42:41 -05:00
William Miceli
824a2e47b0
Isolator for the USB connection
2021-02-16 20:40:56 -05:00
William Miceli
100de7a0ee
The Not-Really-Useful datasheet for the CANbus connector
2021-02-16 20:40:43 -05:00
William Miceli
42e21f6531
Found a GPS receiver that looks good to use and isn't insanely complicated to setup
2021-02-16 20:40:07 -05:00
William Miceli
281edcc924
TI didn't make getting their Driverlib.h very easy...
2021-02-15 21:50:28 -05:00
William Miceli
9a2bea1722
Added original files from imported components
2021-02-15 00:43:09 -05:00
William Miceli
4b37d46251
Added documentation for parts that have now been added
2021-02-15 00:40:56 -05:00
William Miceli
2e898dd125
Changed folder name
2021-02-15 00:40:34 -05:00
William Miceli
b276dd54fe
Had to add Voltage-Level Translators in a few places
2021-02-14 22:08:47 -05:00
William Miceli
237278636d
Added documentation for a bidirectional voltage level translator
2021-02-13 22:57:52 -05:00
William Miceli
4e8bf58866
Added official documentation for I2C reference
2021-02-13 22:57:24 -05:00
William Miceli
87ae285383
GPS Receiver is too complicated for us to quickly get into and made work at the moment
...
Might come back to later on.
2021-02-13 20:59:10 -05:00
William Miceli
74ad12a8ed
Fixed filename
2021-02-13 15:21:03 -05:00
William Miceli
7d4bcc47a6
Added drawing for the socket we'll use
2021-02-13 14:42:42 -05:00
William Miceli
6b83479bf9
Added official SD Card documentation
2021-02-13 13:59:57 -05:00
William Miceli
3ba4462b54
Revert ""
...
This reverts commit 75142d8376b51d00d063
2021-02-08 14:24:50 -05:00
Stephen
75142d8376
2021-02-08 11:13:53 -08:00
William Miceli
18d9248652
Fixed folder names
2021-02-07 22:11:44 -05:00
William Miceli
11dc989c94
Added pre-made component symbols/footprints/3D Models
2021-02-07 20:55:05 -05:00
William Miceli
5da064aaa7
Modified names to include document IDs
2021-02-07 20:54:31 -05:00
William Miceli
5820f7a5d0
Renamed datasheet to fit scheme of others (including the document id)
2021-02-06 20:53:17 -05:00
William Miceli
94288276f7
Renamed References folder to Resources
2021-02-02 00:49:50 -05:00
William Miceli
5e8e442322
Had to import symbol, footprint and 3D model for the MCP2542
2021-02-02 00:49:14 -05:00
