Device Specifications

Microcontroller: Texas Instruments MSP430F5438AIPZR

• 1.8 V to 3.6 V Supply Voltage
• Capabilities:
  • 16-bit architecture
  • 25 MHz System Clock
• Notable Peripherals:
  • Up to 4 of:
    • UART/SPI
  • Up to 4 of:
    • I2C/SPI
  • 12-bit ADC
    • 14 external channels

Real-Time Clock/Calendar: Microchip Technology ‎MCP7940MT-I/SN

• 1.8 V to 5.5 V Supply Voltage
• Notable Peripherals:
  • I2C
    • Slave only
    • Clock rate up to 400 kHz

Bluetooth/Wi-Fi: Espressif Systems ESP32-WROVER-IE (8MB)

• 3.0 V to 3.6 V Supply Voltage
• Notable Peripherals:
  • I2C (2)
    • Master or Slave
    • 100 kbit/s or 400 kbit/s
    • 7-bit/10-bit addressing mode
  • SPI
    • SPI, HSPI and VSPI
    • Master or Slave
    • 1-line full-duplex and 1/2/4-line half-duplex
    • Up to 80 MHz
    • Up to 64-byte FIFO
  • UART (3)
    • Up to 5 Mbps

GPS Receiver: Maxim Integrated ‎MAX2771ETI+T

• 2.7 V to 3.3 V Supply Voltage
• Notable Peripherals:
  • SPI
    • Slave only
    • Need to calculate frequency

CANbus Controller: Microchip Technology MCP2515T-I/SO

• 2.7 V to 5.5 V Supply Voltage
• Notable Peripherals:
  • SPI
    • Slave (Assuming only option)
    • 10 MHz

CANbus Transceiver: ‎Microchip Technology MCP2542FD-H/SN

• 4.5 V to 5.5 V Supply Voltage
• Used directly with CANbus Controller

SD Card (Generic)

• 2.7 V to 3.6 V Supply Voltage
• Notable Peripherals:
  • SPI

USB to UART Bridge: Future Technology Devices International FT230XS-R

• 3 V to 5 V Supply Voltage
• Notable Peripherals:
  • UART

RS-232 Transceiver: STMicroelectronics ST232CDR

• 4.5 V to 5.5 V Supply Voltage
• Will use UART from the MCU

Inertial Measurement Unit: TDK InvenSense ICM-20600

• 1.71 V to 3.45 V Supply Voltage
• Notable Peripherals:
  • I2C
    • Slave only
    • 400 kHz
  • SPI
    • Slave only
    • 10 MHz