{\bfseries{Subpages}} 


\begin{DoxyItemize}
\item \mbox{\hyperlink{hardware}{Hardware}}
\item \mbox{\hyperlink{software}{Software}}
\end{DoxyItemize}

\DoxyHorRuler{0}
\hypertarget{index_autotoc_md15}{}\doxysection{About}\label{index_autotoc_md15}
What this project is about (TODO)\hypertarget{index_autotoc_md16}{}\doxysection{Documentation}\label{index_autotoc_md16}
For Documentation, we will use \char`\"{}doxygen\char`\"{} to easily create documentation pages for the project. This will be accessible in a variety of means, but primarily through HTML pages accessible through a browser, covering all aspects of the project.

More information here\+: \mbox{\hyperlink{documentation_guide}{Documentation Guide}}\hypertarget{index_autotoc_md17}{}\doxysubsection{Tips from Dr. Bazuin}\label{index_autotoc_md17}

\begin{DoxyItemize}
\item Make sub-\/circuits/sub-\/designs for schematics to keep things organized and modular/copy-\/able
\item We can sit-\/in on Sunseeker meetings
\item Need higher voltage for Lights from the supplied voltage of CANbus
\item Connecting crystal oscillators to MCU
\item A-\/213/\+A-\/216? has some power conversion example boards
\item Will Beringer(?) has schematics of DC-\/\+DC converters
\item MCU -\/ Test pins need to be connected for JTAG interface
\item MCU -\/ Have switch to short !\+RST pin on MCU with capacitors to allow the MCU to reset
\item MCU -\/ Oth port LED toggle
\item MCU -\/ Setup clock system with using SLAU208Q, page 161
\item MCU -\/ UART on SLAU208Q, page 939
\item Document things as we go
\item Need to make sure we have a BOM
\item Free samples for parts from manufacturers
\end{DoxyItemize}\hypertarget{index_autotoc_md18}{}\doxysubsection{Tips from Dr. Gomez}\label{index_autotoc_md18}

\begin{DoxyItemize}
\item Our requirements/specifications should be made to be more measurable
\item Need to design to safety standards, which need to be researched online
\item He said that he is available himself for anything power-\/related to help out with if needed
\end{DoxyItemize}\hypertarget{index_autotoc_md19}{}\doxysection{TODO List}\label{index_autotoc_md19}

\begin{DoxyItemize}
\item \mbox{[} \mbox{]} Make battery circuitry for Real-\/\+Time Clock/\+Calendar for when the vehicle is off.
\item \mbox{[} \mbox{]} Ensure the footprint for CANbus Transceiver is present, since it\textquotesingle{}s not available in Altium by default, and the import from Ultra Librarian seemed to only successfully add the schematic and 3D Model, but wasn\textquotesingle{}t sure about footprint.
\item \mbox{[} \mbox{]} The CANbus Controller required a resonator/oscillator and capacitor pair to be picked, but non-\/optimized values were given and so we need to test which resonator/oscillator and capacitor pair works best.
\item \mbox{[} \mbox{]} Need to look through Sunseeker documentation to learn how they have their CANbus setup, ensuring we have our controller and transceiver setup correctly. 
\end{DoxyItemize}