William/Senior-Design-Project_WMU-Sunseeker_Altium-Designer
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
aac8e096fd7885ecbaba62328b122212763ff0a2
Senior-Design-Project_WMU-S…/Hardware/AltiumProject/2020-2021 Telemetry and Lighting Board/History
History
William Miceli aac8e096fd Finished all changed mentioned by Dr. Bazuin 
Implemented voltage-level translators for the IMU and it's 1.8V requirements; All components are now sized 0805 or larger; Test points have been fixed; all ICs that need bypass capacitors have them; etc.
2021-03-15 22:47:39 -04:00
..
00000000740B5EB7
The CANbus modules are about 98% done!
2021-02-02 00:50:27 -05:00
Libraries
Renamed Schematics.SchLib to Symbols.SchLib
2021-03-12 18:39:43 -05:00
2020-2021 Telemetry and Lighting Board.~(1).PrjPcb.Zip
Altium being dumb...
2021-01-30 17:52:02 -05:00
2020-2021 Telemetry and Lighting Board.~(27).PrjPcb.Zip
Removed empty PCB layouts and added the three that we'll be using with 4 signal layers each
2021-02-28 22:25:04 -05:00
2020-2021 Telemetry and Lighting Board.~(28).PrjPcb.Zip
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
2020-2021 Telemetry and Lighting Board.~(29).PrjPcb.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
2020-2021 Telemetry and Lighting Board.~(30).PrjPcb.Zip
Hopefully things aren't messed up.
2021-03-12 15:36:16 -05:00
2020-2021 Telemetry and Lighting Board.~(31).PrjPcb.Zip
Added TPS61378-Q1 footprint to Altium, reworking Boost Converter. Deleted Boost PCB.
2021-03-12 15:48:36 -05:00
2020-2021 Telemetry and Lighting Board.~(32).PrjPcb.Zip
Miscellaneous Altium changes
2021-03-12 15:51:41 -05:00
2020-2021 Telemetry and Lighting Board.~(33).PrjPcb.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
2020-2021 Telemetry and Lighting Board.~(34).PrjPcb.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
2020-2021 Telemetry and Lighting Board.~(35).PrjPcb.Zip
Apparently Altium's servers are having issues
2021-03-13 14:25:25 -05:00
2020-2021 Telemetry and Lighting Board.~(36).PrjPcb.Zip
Apparently Altium's servers are having issues
2021-03-13 14:25:25 -05:00
2020-2021 Telemetry and Lighting Board.~(37).PrjPcb.Zip
Finished all changed mentioned by Dr. Bazuin
2021-03-15 22:47:39 -04:00
Boost Converter.~(1).PcbDoc.Zip
Renames Boost schematic and added PCB named Boost Converter
2021-03-12 15:47:35 -05:00
Boost Converter.~(1).SchDoc.Zip
Renames Boost schematic and added PCB named Boost Converter
2021-03-12 15:47:35 -05:00
Boost Converter.~(2).#(Deleted).PcbDoc.Zip
Added TPS61378-Q1 footprint to Altium, reworking Boost Converter. Deleted Boost PCB.
2021-03-12 15:48:36 -05:00
Boost Converter.~(2).SchDoc.Zip
Added +16V port, changed Diode for Boost Converter
2021-03-12 15:48:04 -05:00
Boost Converter.~(3).SchDoc.Zip
Added note for TPS61378-Q1 part to boost
2021-03-12 15:48:24 -05:00
Boost Converter.~(4).SchDoc.Zip
Added TPS61378-Q1 footprint to Altium, reworking Boost Converter. Deleted Boost PCB.
2021-03-12 15:48:36 -05:00
Boost Converter.~(5).SchDoc.Zip
Added TPS61378-Q1 footprint to Altium, reworking Boost Converter. Deleted Boost PCB.
2021-03-12 15:48:36 -05:00
Boost Converter.~(6).SchDoc.Zip
Added TPS61378-Q1 footprint to Altium, reworking Boost Converter. Deleted Boost PCB.
2021-03-12 15:48:36 -05:00
Boost Converter.~(7).SchDoc.Zip
Added wiring to boost converter
2021-03-12 15:49:27 -05:00
Boost Converter.~(8).SchDoc.Zip
More changes to boost converter
2021-03-12 15:49:35 -05:00
Boost Converter.~(9).SchDoc.Zip
More changes to boost converter
2021-03-12 15:49:35 -05:00
Boost Converter.~(10).SchDoc.Zip
Added notes for boost component values
2021-03-12 15:49:35 -05:00
Boost Converter.~(11).SchDoc.Zip
Boost changes
2021-03-12 17:21:44 -05:00
Boost Converter.~(12).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Boost Converter.~(13).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Boost Converter.~(14).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus.~(1).SchDoc.Zip
The CANbus modules are about 98% done!
2021-02-02 00:50:27 -05:00
CANbus.~(27).SchDoc.Zip
Changed out CANbus Transceiver with a TI SN65HVD234D
2021-03-06 20:01:33 -05:00
CANbus.~(28).SchDoc.Zip
Changed out CANbus Transceiver with a TI SN65HVD234D
2021-03-06 20:01:33 -05:00
CANbus.~(29).SchDoc.Zip
Changed out CANbus Transceiver with a TI SN65HVD234D
2021-03-06 20:01:33 -05:00
CANbus.~(30).SchDoc.Zip
Changed out CANbus Transceiver with a TI SN65HVD234D
2021-03-06 20:01:33 -05:00
CANbus.~(31).SchDoc.Zip
Changed out CANbus Transceiver with a TI SN65HVD234D
2021-03-06 20:01:33 -05:00
CANbus.~(32).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
CANbus.~(33).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
CANbus.~(34).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
CANbus.~(35).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
CANbus.~(36).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
CANbus.~(37).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
CANbus.~(38).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
CANbus.~(39).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
CANbus.~(40).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
CANbus.~(41).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
CANbus.~(42).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(43).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(44).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(45).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(46).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(47).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(48).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(49).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(50).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus.~(51).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus.~(52).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus.~(53).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus.~(54).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Connection Swap (2x2).~(1).SchDoc.Zip
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
Connection Swap (2x2).~(2).SchDoc.Zip
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
Connection Swap (2x2).~(3).SchDoc.Zip
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
Connection Swap (2x2).~(4).SchDoc.Zip
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
Connection Swap (2x2).~(5).SchDoc.Zip
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
Connection Swap (2x2).~(6).SchDoc.Zip
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
Connection Swap (2x2).~(7).#(Deleted).SchDoc.Zip
Removed connection swap schematic and just made a custom part
2021-02-10 17:06:21 -05:00
DC-DC SMPS.~(1).SchDoc.Zip
Created DC-DC SMPS schematic
2021-02-17 14:03:34 -05:00
DC-DC SMPS.~(4).SchDoc.Zip
Added LM2576
2021-02-17 19:39:45 -05:00
DC-DC SMPS.~(5).SchDoc.Zip
Changed the LM2576
2021-02-17 19:41:34 -05:00
DC-DC SMPS.~(6).SchDoc.Zip
Added LT1619 and MBR735
2021-02-17 20:26:12 -05:00
DC-DC SMPS.~(7).SchDoc.Zip
Added bus
2021-02-17 20:42:33 -05:00
DC-DC SMPS.~(8).SchDoc.Zip
Continuing the DC-DC
2021-02-17 21:09:58 -05:00
DC-DC SMPS.~(9).SchDoc.Zip
Added FDS6680A in place of SI9804DY
2021-02-17 21:23:29 -05:00
DC-DC SMPS.~(13).SchDoc.Zip
Minor Update 2
2021-02-22 21:53:10 -05:00
DC-DC SMPS.~(14).SchDoc.Zip
Fixing wiring
2021-02-23 19:50:02 -05:00
DC-DC SMPS.~(15).SchDoc.Zip
Added values to generics R and C
2021-02-23 20:04:15 -05:00
DC-DC SMPS.~(16).SchDoc.Zip
Annotations update
2021-02-25 17:48:40 -05:00
DC-DC SMPS.~(17).SchDoc.Zip
Created a PDF of the DC-DC for the PPT
2021-02-26 14:46:58 -05:00
DC-DC SMPS.~(18).SchDoc.Zip
DC-DC
2021-03-12 15:47:16 -05:00
DC-DC SMPS.~(19).SchDoc.Zip
Editing Boost Converter
2021-03-12 15:47:16 -05:00
DC-DC SMPS.~(20).SchDoc.Zip
Removed Current Source from Boost
2021-03-12 15:47:16 -05:00
ESP32 Bluetooth-WiFi.~(1).SchDoc.Zip
All major components are now imported and placed on corresponding sheets
2021-02-07 20:55:40 -05:00
ESP32 Bluetooth-WiFi.~(9).SchDoc.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP32 Bluetooth-WiFi.~(27).SchDoc.Zip
Added JTAG Headers to ESP32
2021-02-20 15:10:52 -05:00
ESP32 Bluetooth-WiFi.~(28).SchDoc.Zip
Changed debounced Boot button to jumper; ESP32 is now done
2021-02-20 15:21:27 -05:00
ESP32 Bluetooth-WiFi.~(29).SchDoc.Zip
GPS Receiver now has isolated USB interface available
2021-02-20 17:54:57 -05:00
ESP32 Bluetooth-WiFi.~(30).SchDoc.Zip
Minor Update
2021-02-22 21:51:47 -05:00
ESP32 Bluetooth-WiFi.~(31).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
ESP32 Bluetooth-WiFi.~(32).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
ESP32 Bluetooth-WiFi.~(33).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi.~(34).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi.~(35).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi.~(36).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi.~(37).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi.~(38).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
ESP32 Bluetooth-WiFi.~(39).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP32 Bluetooth-WiFi.~(40).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP32 Bluetooth-WiFi.~(41).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP32 Bluetooth-WiFi.~(42).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP32 Bluetooth-WiFi.~(43).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP32 Bluetooth-WiFi.~(44).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP32 Bluetooth-WiFi.~(45).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
ESP32 Bluetooth-WiFi.~(46).SchDoc.Zip
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
ESP32 Bluetooth-WiFi.~(47).SchDoc.Zip
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
ESP32_USB UART Bridge.~(1).SchDoc.Zip
Library Maintenance; Removed old GPS Receiver; Added 4x1 Header Pins
2021-02-20 15:04:12 -05:00
ESP32_USB UART Bridge.~(3).SchDoc.Zip
No functional changes, just added more notes/information mainly
2021-03-06 20:07:02 -05:00
ESP32_USB UART Bridge.~(4).SchDoc.Zip
No functional changes, just added more notes/information mainly
2021-03-06 20:07:02 -05:00
ESP32_USB UART Bridge.~(5).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
ESP32_USB UART Bridge.~(6).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
ESP32_USB UART Bridge.~(7).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32_USB UART Bridge.~(8).SchDoc.Zip
All telemetry and lighting schematics have real components now and no longer generics; Moving onto working on the PCB Layout
2021-03-08 20:23:36 -05:00
ESP32_USB UART Bridge.~(9).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
ESP32_USB UART Bridge.~(10).#(Deleted).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP_USB UART Bridge.~(1).SchDoc.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP_USB UART Bridge.~(2).SchDoc.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP_USB UART Bridge.~(3).SchDoc.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP_USB UART Bridge.~(4).SchDoc.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP_USB UART Bridge.~(5).SchDoc.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP_USB UART Bridge.~(6).SchDoc.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
GPS Receiver.~(1).SchDoc.Zip
Created many blank schematic sheets with needed modules
2021-02-07 00:33:01 -05:00
GPS Receiver.~(7).SchDoc.Zip
GPS Receiver is too complicated for us to quickly get into and made work at the moment
2021-02-13 20:59:10 -05:00
GPS Receiver.~(8).SchDoc.Zip
GPS Receiver is too complicated for us to quickly get into and made work at the moment
2021-02-13 20:59:10 -05:00
GPS Receiver.~(9).SchDoc.Zip
GPS Receiver is too complicated for us to quickly get into and made work at the moment
2021-02-13 20:59:10 -05:00
GPS Receiver.~(26).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
GPS Receiver.~(27).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
GPS Receiver.~(28).SchDoc.Zip
SD Card and GPS Receiver no longer need Chip Select SPI signals, since they have dedicated USCI modules for communication with the MCU
2021-03-08 00:36:14 -05:00
GPS Receiver.~(29).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver.~(30).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver.~(31).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver.~(32).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver.~(33).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver.~(34).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver.~(35).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver.~(36).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
GPS Receiver.~(37).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
GPS Receiver.~(38).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
GPS Receiver.~(39).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
GPS Receiver.~(40).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
GPS Receiver.~(41).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
GPS Receiver.~(42).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Inertial Measurement Unit.~(1).SchDoc.Zip
Created many blank schematic sheets with needed modules
2021-02-07 00:33:01 -05:00
Inertial Measurement Unit.~(24).SchDoc.Zip
IMU is now fully complete, with it's own LDO Regulator, Voltage-Level Shifters and real parts specified
2021-03-06 22:46:32 -05:00
Inertial Measurement Unit.~(25).SchDoc.Zip
IMU is now fully complete, with it's own LDO Regulator, Voltage-Level Shifters and real parts specified
2021-03-06 22:46:32 -05:00
Inertial Measurement Unit.~(26).SchDoc.Zip
IMU is now fully complete, with it's own LDO Regulator, Voltage-Level Shifters and real parts specified
2021-03-06 22:46:32 -05:00
Inertial Measurement Unit.~(27).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Inertial Measurement Unit.~(28).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Inertial Measurement Unit.~(29).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Inertial Measurement Unit.~(30).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Inertial Measurement Unit.~(31).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Inertial Measurement Unit.~(32).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Inertial Measurement Unit.~(33).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Inertial Measurement Unit.~(34).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Inertial Measurement Unit.~(35).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Inertial Measurement Unit.~(36).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Inertial Measurement Unit.~(37).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Inertial Measurement Unit.~(38).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Inertial Measurement Unit.~(39).SchDoc.Zip
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
Inertial Measurement Unit.~(40).SchDoc.Zip
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
Inertial Measurement Unit.~(41).SchDoc.Zip
Finished all changed mentioned by Dr. Bazuin
2021-03-15 22:47:39 -04:00
Inertial Measurement Unit.~(42).SchDoc.Zip
Finished all changed mentioned by Dr. Bazuin
2021-03-15 22:47:39 -04:00
Inertial Measurement Unit.~(43).SchDoc.Zip
Finished all changed mentioned by Dr. Bazuin
2021-03-15 22:47:39 -04:00
Inertial Measurement Unit.~(44).SchDoc.Zip
Finished all changed mentioned by Dr. Bazuin
2021-03-15 22:47:39 -04:00
Lighting.~(1).PcbDoc.Zip
Started a PCB file
2021-02-17 13:51:59 -05:00
Lighting.~(1).SchDoc.Zip
Added past lighting board schematic to start from
2021-02-08 15:07:35 -05:00
Lighting.~(2).#(Deleted).PcbDoc.Zip
Removed empty PCB layouts and added the three that we'll be using with 4 signal layers each
2021-02-28 22:25:04 -05:00
Lighting.~(17).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Lighting.~(18).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
Lighting.~(19).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Lighting.~(20).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Lighting.~(21).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Lighting.~(22).SchDoc.Zip
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Lighting.~(23).SchDoc.Zip
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Lighting.~(24).SchDoc.Zip
Modified ordering of Lighting components to make PCB Layout simpler and be able to have a more compact design.
2021-03-12 18:49:14 -05:00
Lighting.~(25).SchDoc.Zip
Condensing Lighting PCB design
2021-03-12 18:54:29 -05:00
Lighting.~(26).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
Lighting.~(27).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
Lighting.~(28).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Lighting.~(29).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
LM5141RGER.~(1).SchDoc.Zip
Started LM5141RGER Schematic. Generic parts
2021-03-01 14:28:00 -05:00
LM5141RGER.~(3).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(1).SchDoc.Zip
Added crystal oscillators like in previous lighting board
2021-01-30 18:06:05 -05:00
Main.~(83).SchDoc.Zip
Minor Update 2
2021-02-22 21:53:10 -05:00
Main.~(93).SchDoc.Zip
Moved supercapacitor to main schematic
2021-02-28 22:06:23 -05:00
Main.~(94).SchDoc.Zip
Added generic components for LEDs until Sunseeker's component inventory is completed to see if we can use existing components
2021-03-01 00:22:46 -05:00
Main.~(95).SchDoc.Zip
Added generic components for LEDs until Sunseeker's component inventory is completed to see if we can use existing components
2021-03-01 00:22:46 -05:00
Main.~(96).SchDoc.Zip
Replaced GP Switch, and annotated
2021-03-01 13:15:09 -05:00
Main.~(97).SchDoc.Zip
Replaced GP Switch, and annotated
2021-03-01 13:15:09 -05:00
Main.~(98).SchDoc.Zip
Modified general purpose switch
2021-03-01 16:07:19 -05:00
Main.~(99).SchDoc.Zip
Modified general purpose switch
2021-03-01 16:07:19 -05:00
Main.~(109).SchDoc.Zip
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
Main.~(110).SchDoc.Zip
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
Main.~(111).SchDoc.Zip
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
Main.~(112).SchDoc.Zip
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
Main.~(113).SchDoc.Zip
There's a bit more spaghetti, but at least now, nearly all components have a dedicated USCI module on the MCU
2021-03-06 20:56:09 -05:00
Main.~(114).SchDoc.Zip
IMU is now fully complete, with it's own LDO Regulator, Voltage-Level Shifters and real parts specified
2021-03-06 22:46:32 -05:00
Main.~(115).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Main.~(116).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
Main.~(117).SchDoc.Zip
SD Card and GPS Receiver no longer need Chip Select SPI signals, since they have dedicated USCI modules for communication with the MCU
2021-03-08 00:36:14 -05:00
Main.~(118).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(119).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(120).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(121).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(122).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(123).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(124).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(125).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(126).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(127).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(128).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(129).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main.~(131).SchDoc.Zip
Added note for TPS61378-Q1 part to boost
2021-03-12 15:48:24 -05:00
Main.~(132).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
Main.~(133).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Main.~(134).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Main.~(135).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Main.~(136).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Main.~(137).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Main.~(138).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(139).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(140).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(141).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(142).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(143).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(144).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(145).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(146).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(147).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main.~(148).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_JTAG.~(1).SchDoc.Zip
JTAG was getting a bit busy, so I made a separate schematic for it
2021-01-31 00:12:41 -05:00
MCU_JTAG.~(7).SchDoc.Zip
Added diode to VCC_TOOL power source
2021-03-01 00:32:52 -05:00
MCU_JTAG.~(8).SchDoc.Zip
All parts specified now
2021-03-04 00:33:46 -05:00
MCU_JTAG.~(9).SchDoc.Zip
All parts specified now
2021-03-04 00:33:46 -05:00
MCU_JTAG.~(13).SchDoc.Zip
Changed MCU reset button to be right-angled to be pressed from outside the enclosure.
2021-03-04 00:37:11 -05:00
MCU_JTAG.~(14).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_JTAG.~(15).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_JTAG.~(16).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_Power.~(1).SchDoc.Zip
MCU power now has it's own schematic
2021-02-13 15:05:04 -05:00
MCU_Power.~(7).SchDoc.Zip
Swapped generic parts with real ones
2021-03-06 20:03:07 -05:00
MCU_Power.~(8).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
MCU_Power.~(9).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
MCU_Power.~(10).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
MCU_Power.~(11).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
MCU_Power.~(12).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
MCU_Power.~(13).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_Power.~(14).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_Power.~(15).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Real-Time Clock.~(1).SchDoc.Zip
Created many blank schematic sheets with needed modules
2021-02-07 00:33:01 -05:00
Real-Time Clock.~(19).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Real-Time Clock.~(20).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Real-Time Clock.~(21).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Real-Time Clock.~(22).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Real-Time Clock.~(23).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
Real-Time Clock.~(24).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Real-Time Clock.~(25).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Real-Time Clock.~(26).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
Real-Time Clock.~(27).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Real-Time Clock.~(28).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Real-Time Clock.~(29).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Real-Time Clock.~(30).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
RealTimeClock.~(1).SchDoc.Zip
Created many blank schematic sheets with needed modules
2021-02-07 00:33:01 -05:00
RS-232 Transceiver.~(1).SchDoc.Zip
Created many blank schematic sheets with needed modules
2021-02-07 00:33:01 -05:00
RS-232 Transceiver.~(9).SchDoc.Zip
Some more updates to RS-232 connection
2021-02-08 20:40:00 -05:00
RS-232 Transceiver.~(22).SchDoc.Zip
Changed RS-232 Transceiver to a Maxim Integrated MAX3232EUE+, since it can run on only 3.3V instead of needing 5V
2021-03-06 20:05:13 -05:00
RS-232 Transceiver.~(23).SchDoc.Zip
Changed RS-232 Transceiver to a Maxim Integrated MAX3232EUE+, since it can run on only 3.3V instead of needing 5V
2021-03-06 20:05:13 -05:00
RS-232 Transceiver.~(24).SchDoc.Zip
Changed RS-232 Transceiver to a Maxim Integrated MAX3232EUE+, since it can run on only 3.3V instead of needing 5V
2021-03-06 20:05:13 -05:00
RS-232 Transceiver.~(25).SchDoc.Zip
Changed RS-232 Transceiver to a Maxim Integrated MAX3232EUE+, since it can run on only 3.3V instead of needing 5V
2021-03-06 20:05:13 -05:00
RS-232 Transceiver.~(26).SchDoc.Zip
Changed RS-232 Transceiver to a Maxim Integrated MAX3232EUE+, since it can run on only 3.3V instead of needing 5V
2021-03-06 20:05:13 -05:00
RS-232 Transceiver.~(27).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
RS-232 Transceiver.~(28).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
RS-232 Transceiver.~(29).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
RS-232 Transceiver.~(30).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
RS-232 Transceiver.~(31).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
RS-232 Transceiver.~(32).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
RS-232 Transceiver.~(33).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
RS-232 Transceiver.~(34).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
RS-232 Transceiver.~(35).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
RS-232 Transceiver.~(36).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
RS-232 Transceiver.~(37).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
SD Card.~(1).SchDoc.Zip
Created many blank schematic sheets with needed modules
2021-02-07 00:33:01 -05:00
SD Card.~(6).SchDoc.Zip
SD Card and GPS Receiver no longer need Chip Select SPI signals, since they have dedicated USCI modules for communication with the MCU
2021-03-08 00:36:14 -05:00
SD Card.~(7).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
SD Card.~(8).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
SD Card.~(9).SchDoc.Zip
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
SD Card.~(10).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
SD Card.~(11).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
SD Card.~(12).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
SD Card.~(13).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
SD Card.~(14).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Sheet1.~(1).SchDoc.Zip
Altium Setup
2021-01-30 16:48:23 -05:00
Sheet1.~(2).SchDoc.Zip
Altium Setup
2021-01-30 16:48:23 -05:00
Sheet1.~(3).SchDoc.Zip
Altium being dumb...
2021-01-30 17:52:02 -05:00
Sheet1.~(4).SchDoc.Zip
Added crystal oscillators like in previous lighting board
2021-01-30 18:06:05 -05:00
Stage1_Power.~(1).PcbDoc.Zip
Removed empty PCB layouts and added the three that we'll be using with 4 signal layers each
2021-02-28 22:25:04 -05:00
Stage 1 - Power.~(1).PcbDoc.Zip
Removed empty PCB layouts and added the three that we'll be using with 4 signal layers each
2021-02-28 22:25:04 -05:00
Stage 1 - Telemetry And Lighting.~(1).PcbDoc.Zip
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Stage 1 - Telemetry And Lighting.~(2).PcbDoc.Zip
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Stage 1 - Telemetry And Lighting.~(3).PcbDoc.Zip
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Stage 1 - Telemetry And Lighting.~(4).PcbDoc.Zip
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Stage 1 - Telemetry And Lighting.~(5).PcbDoc.Zip
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Stage 1 - Telemetry And Lighting.~(6).PcbDoc.Zip
DC-DC
2021-03-12 15:47:16 -05:00
Stage 1 - Telemetry And Lighting.~(7).PcbDoc.Zip
Modified ordering of Lighting components to make PCB Layout simpler and be able to have a more compact design.
2021-03-12 18:49:14 -05:00
Stage 1 - Telemetry And Lighting.~(8).PcbDoc.Zip
Condensing Lighting PCB design
2021-03-12 18:54:29 -05:00
Stage 1 - Telemetry And Lighting.~(9).PcbDoc.Zip
Condensing Lighting PCB design
2021-03-12 18:54:29 -05:00
Stage 1 - Telemetry And Lighting.~(10).PcbDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
Stage 1 - Telemetry And Lighting.~(11).PcbDoc.Zip
Lighting PCB design significantly more compact
2021-03-12 19:22:32 -05:00
Stage 1 - Telemetry And Lighting.~(12).PcbDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Stage 1 - Telemetry And Lighting.~(13).PcbDoc.Zip
Working on PCB Layout for Telemetry and Lighting
2021-03-13 22:40:20 -05:00
SuperCapacitor.~(1).SchDoc.Zip
Started the Supercapacitor board. Added 3.3V net
2021-02-24 14:41:07 -05:00
SuperCapacitor.~(2).SchDoc.Zip
Added FG0V155ZF Supercapacitor
2021-02-25 17:44:34 -05:00
SuperCapacitor.~(3).SchDoc.Zip
Added FG0V155ZF Supercapacitor
2021-02-25 17:44:34 -05:00
SuperCapacitor.~(4).SchDoc.Zip
Annotations update
2021-02-25 17:48:40 -05:00
SuperCapacitor.~(5).SchDoc.Zip
Added note to Supercapacitor
2021-02-25 17:57:35 -05:00
SuperCapacitor.~(6).SchDoc.Zip
Moved supercapacitor to main schematic
2021-02-28 22:06:23 -05:00
SuperCapacitor.~(7).#(Deleted).SchDoc.Zip
Moved supercapacitor to main schematic
2021-02-28 22:06:23 -05:00
USB UART Bridge.~(1).Harness.Zip
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
USB UART Bridge.~(1).SchDoc.Zip
Created many blank schematic sheets with needed modules
2021-02-07 00:33:01 -05:00
USB UART Bridge.~(23).SchDoc.Zip
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
USB UART Bridge.~(24).SchDoc.Zip
Added GPS Receiver breakout board to component library; Fixed other components, adding designators; Updated components on schematic scheets
2021-03-08 00:26:55 -05:00
USB UART Bridge.~(25).SchDoc.Zip
All telemetry and lighting schematics have real components now and no longer generics; Moving onto working on the PCB Layout
2021-03-08 20:23:36 -05:00
USB UART Bridge.~(26).SchDoc.Zip
All telemetry and lighting schematics have real components now and no longer generics; Moving onto working on the PCB Layout
2021-03-08 20:23:36 -05:00
USB UART Bridge.~(27).SchDoc.Zip
All telemetry and lighting schematics have real components now and no longer generics; Moving onto working on the PCB Layout
2021-03-08 20:23:36 -05:00
USB UART Bridge.~(28).SchDoc.Zip
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
USB UART Bridge.~(29).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
USB UART Bridge.~(30).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
USB UART Bridge.~(31).SchDoc.Zip
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
USB UART Bridge.~(32).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(33).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(34).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(35).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(36).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(37).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(38).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(39).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(40).SchDoc.Zip
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge.~(41).SchDoc.Zip
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
USB UART Bridge.~(42).SchDoc.Zip
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
Voltage-Level Translator [Generic - 3.3V to 5V].~(1).SchDoc.Zip
Had to add Voltage-Level Translators in a few places
2021-02-14 22:08:47 -05:00
Voltage-Level Translator [Generic - 3.3V to 5V].~(2).SchDoc.Zip
Had to add Voltage-Level Translators in a few places
2021-02-14 22:08:47 -05:00
Voltage-Level Translator [I2C - 3.3V to 5V].~(1).SchDoc.Zip
Had to add Voltage-Level Translators in a few places
2021-02-14 22:08:47 -05:00
Voltage-Level Translator [I2C][3.3V to 5V][2-bit].~(1).SchDoc.Zip
Had to add Voltage-Level Translators in a few places
2021-02-14 22:08:47 -05:00
Voltage-Level Translator [I2C][3.3V to 5V][2-bit].~(2).SchDoc.Zip
Added MOSFET and Connector components for Lighting; Light board also finished
2021-02-15 00:43:50 -05:00
Voltage-Level Translator [I2C][3.3V to 5V][2-bit].~(3).#(Deleted).SchDoc.Zip
I2C Voltage-Level Translator no longer needed
2021-02-16 22:01:54 -05:00
Voltage-Level Translator [Push-Pull][3.3V to 5V][2-bit].~(1).SchDoc.Zip
Had to add Voltage-Level Translators in a few places
2021-02-14 22:08:47 -05:00
Voltage-Level Translator [Push-Pull][3.3V to 5V][2-bit].~(4).SchDoc.Zip
Added MOSFET and Connector components for Lighting; Light board also finished
2021-02-15 00:43:50 -05:00
Voltage-Level Translator [Push-Pull][3.3V to 5V][2-bit].~(5).SchDoc.Zip
Voltage translators no longer needed, thankfully
2021-03-06 20:07:37 -05:00
Voltage-Level Translator [Push-Pull][3.3V to 5V][2-bit].~(6).#(Deleted).SchDoc.Zip
Voltage translators no longer needed, thankfully
2021-03-06 20:07:37 -05:00