William/Senior-Design-Project_WMU-Sunseeker_Altium-Designer

Files

William Miceli 5a0d524bb8 Added Design Choices page

Currently have info about the JTAG programmer providing power to the MCU and not the other way around

2021-01-30 23:42:28 -05:00

595 B

Raw Blame History

@page hardware Hardware

@b Subpages

@subpage designChoices
@subpage deviceSpecifications
@subpage layoutPlanning

Design Reminders

From "Texas Instruments - SLAS655G...", Page 22:
- To improve EMI on the XT1 oscillator, the following guidelines should be observed:
  - Keep the trace between the device and the crystal as short as possible.
  - Design a good ground plane around the oscillator pins.
  - Prevent crosstalk from other clock or data lines into oscillator pins XIN and XOUT.
  - Avoid running PCB traces underneath or adjacent to the XIN and XOUT pins.