Setting up new project for debugging the Real-Time Clock

Telem_Debug/Debug_RTC/usci.h

@@ -0,0 +1,67 @@
+/*
+ * USCI Functions
+ */
+
+#ifndef USCI_H_
+#define USCI_H_
+
+#include <msp430.h>
+
+/*
+ * Initializes all USCI modules using their own respective `usci_xx_init()` functions
+ */
+void usci_init(void);
+
+void usci_A0_init(void);
+
+void usci_A1_init(void);
+
+/*
+ * USCI A2 Initialization [UART Mode]
+ *
+ * The FTDI FT230XS-R that was selected can handle up to 3 Mbaud, so we'll target 1 Mbaud
+ * The SMCLK is currently at 10 MHz
+ *
+ * Using the "MSP430 USCI/EUSCI UART Baud Rate Calculation" tool at:
+ * http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSP430BaudRateConverter/index.html
+ * The following values were found:
+ *      clock Prescalar: 10
+ *      firstModReg: 0
+ *      secondModReg: 0
+ *      overSampling: 0
+ */
+void usci_A2_init(void);
+
+void usci_A2_enable(void);
+
+void usci_A2_disable(void);
+
+void usci_A2_enableInterrupt(void);
+
+void usci_A2_disableInterrupt(void);
+
+void usci_A2_transmitChar(char charToTransmit);
+
+char usci_A2_receiveChar(void);
+
+int usci_A2_transmitString(char* pString);
+
+int usci_A2_receiveString(char* pString);
+
+void usci_A3_init(void);
+
+void usci_B0_init(void);
+
+void usci_B1_init(void);
+
+/*
+ * USCI B2 Initialization [I2C Mode]
+ *
+ * The Microchip Technology MCP7940M supports up to 400 kHz I2C communication.
+ *
+ */
+void usci_B2_init(void);
+
+void usci_B3_init(void);
+
+#endif /* USCI_H_ */