diff --git a/Telem_Debug/Debug_UART-USB/usci.c b/Telem_Debug/Debug_UART-USB/usci.c
index 180c3ef..dd2722d 100644
--- a/Telem_Debug/Debug_UART-USB/usci.c
+++ b/Telem_Debug/Debug_UART-USB/usci.c
@@ -22,7 +22,6 @@ void usci_A0_init(void){
     /******************************** USCI A1 ********************************/
     /*************************************************************************/
 
-
 void usci_A1_init(void){
 
 }
@@ -32,7 +31,7 @@ void usci_A1_init(void){
     /*************************************************************************/
 
 void usci_A2_init(void){
-    UCA2CTL1 |= UCSWRST;                                                        // Software Reset Enable - Set high, disabling the USCI module; Register options can only be set when the UCSWRST bit = 1
+    UCA2CTL1 |= UCSWRST;                                                        // Software Reset Enable - Set high, disabling the USCI module; USCI configuration changes can only be made when the UCSWRST bit = 1
     UCA2CTL1 &= ~0b11000000;                                                    // Reset both UCSSELx bits so the USCI Clock Source Select bits are more predictable
     UCA2CTL1 |= UCSSEL__SMCLK;                                                  // USCI Clock Source Select - SMCLK
     UCA2CTL1 &= ~UCRXEIE;                                                       // Receive Erroneous-Character Interrupt Enable - Disabled
@@ -47,7 +46,11 @@ void usci_A2_init(void){
     UCA2CTL0 &= ~UCMODE1;                                                       // USCI Mode [2 Bits Required] - UART mode selected
     UCA2CTL0 &= ~UCMODE0;                                                       // USCI Mode [2 Bits Required] - UART mode selected
     UCA2CTL0 &= ~UCSYNC;                                                        // Synchronous Mode Enable - Asynchronous mode selected
-
+    UCA2BRW = 10;                                                               // Clock Prescalar
+    UCA2MCTL &= ~0b11111111;                                                    // Reset entire register
+    UCA2MCTL |= 0x0 << 4;                                                       // First Modulation Stage Select
+    UCA2MCTL |= 0x0 << 1;                                                       // Second Modulation Stage Select
+    UCA2MCTL |= 0x0;                                                            // Oversampling Mode Enable - Disabled
 }
 
 void usci_A2_enable(void){