#----------------------------------------------------------- # Vivado v2018.3 (64-bit) # SW Build 2405991 on Thu Dec 6 23:38:27 MST 2018 # IP Build 2404404 on Fri Dec 7 01:43:56 MST 2018 # Start of session at: Wed Mar 13 11:12:42 2019 # Process ID: 11884 # Current directory: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1 # Command line: vivado.exe -log CPU9bits.vdi -applog -product Vivado -messageDb vivado.pb -mode batch -source CPU9bits.tcl -notrace # Log file: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits.vdi # Journal file: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1\vivado.jou #----------------------------------------------------------- source CPU9bits.tcl -notrace Command: link_design -top CPU9bits -part xc7k160tifbg484-2L Design is defaulting to srcset: sources_1 Design is defaulting to constrset: constrs_1 INFO: [Project 1-479] Netlist was created with Vivado 2018.3 INFO: [Device 21-403] Loading part xc7k160tifbg484-2L INFO: [Project 1-570] Preparing netlist for logic optimization Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 583.273 ; gain = 0.000 INFO: [Project 1-111] Unisim Transformation Summary: No Unisim elements were transformed. 4 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered. link_design completed successfully link_design: Time (s): cpu = 00:00:07 ; elapsed = 00:00:08 . Memory (MB): peak = 588.785 ; gain = 334.348 Command: opt_design Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti' Running DRC as a precondition to command opt_design Starting DRC Task INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Project 1-461] DRC finished with 0 Errors INFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.165 . Memory (MB): peak = 592.141 ; gain = 3.355 Starting Cache Timing Information Task INFO: [Timing 38-35] Done setting XDC timing constraints. Ending Cache Timing Information Task | Checksum: 16212f689 Time (s): cpu = 00:00:14 ; elapsed = 00:00:14 . Memory (MB): peak = 1080.938 ; gain = 488.797 Starting Logic Optimization Task Phase 1 Retarget INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s). INFO: [Opt 31-49] Retargeted 0 cell(s). Phase 1 Retarget | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.032 . Memory (MB): peak = 1175.109 ; gain = 0.000 INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 0 cells Phase 2 Constant propagation INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s). Phase 2 Constant propagation | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.033 . Memory (MB): peak = 1175.109 ; gain = 0.000 INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 0 cells Phase 3 Sweep Phase 3 Sweep | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.035 . Memory (MB): peak = 1175.109 ; gain = 0.000 INFO: [Opt 31-389] Phase Sweep created 0 cells and removed 0 cells Phase 4 BUFG optimization Phase 4 BUFG optimization | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.037 . Memory (MB): peak = 1175.109 ; gain = 0.000 INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells. Phase 5 Shift Register Optimization Phase 5 Shift Register Optimization | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.087 . Memory (MB): peak = 1175.109 ; gain = 0.000 INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells Phase 6 Post Processing Netlist Phase 6 Post Processing Netlist | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.087 . Memory (MB): peak = 1175.109 ; gain = 0.000 INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cells Opt_design Change Summary ========================= ------------------------------------------------------------------------------------------------------------------------- | Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations | ------------------------------------------------------------------------------------------------------------------------- | Retarget | 0 | 0 | 0 | | Constant propagation | 0 | 0 | 0 | | Sweep | 0 | 0 | 0 | | BUFG optimization | 0 | 0 | 0 | | Shift Register Optimization | 0 | 0 | 0 | | Post Processing Netlist | 0 | 0 | 0 | ------------------------------------------------------------------------------------------------------------------------- Starting Connectivity Check Task Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1175.109 ; gain = 0.000 Ending Logic Optimization Task | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.090 . Memory (MB): peak = 1175.109 ; gain = 0.000 Starting Power Optimization Task INFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns. Ending Power Optimization Task | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.009 . Memory (MB): peak = 1175.109 ; gain = 0.000 Starting Final Cleanup Task Ending Final Cleanup Task | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1175.109 ; gain = 0.000 Starting Netlist Obfuscation Task Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1175.109 ; gain = 0.000 Ending Netlist Obfuscation Task | Checksum: 16212f689 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1175.109 ; gain = 0.000 INFO: [Common 17-83] Releasing license: Implementation 20 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered. opt_design completed successfully opt_design: Time (s): cpu = 00:00:15 ; elapsed = 00:00:16 . Memory (MB): peak = 1175.109 ; gain = 586.324 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1175.109 ; gain = 0.000 WARNING: [Constraints 18-5210] No constraints selected for write. Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened. INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_opt.dcp' has been generated. INFO: [runtcl-4] Executing : report_drc -file CPU9bits_drc_opted.rpt -pb CPU9bits_drc_opted.pb -rpx CPU9bits_drc_opted.rpx Command: report_drc -file CPU9bits_drc_opted.rpt -pb CPU9bits_drc_opted.pb -rpx CPU9bits_drc_opted.rpx INFO: [IP_Flow 19-234] Refreshing IP repositories INFO: [IP_Flow 19-1704] No user IP repositories specified INFO: [IP_Flow 19-2313] Loaded Vivado IP repository 'C:/Xilinx/Vivado/2018.3/data/ip'. INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_drc_opted.rpt. report_drc completed successfully Command: place_design Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Running DRC as a precondition to command place_design INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Starting Placer Task INFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 2 CPUs Phase 1 Placer Initialization Phase 1.1 Placer Initialization Netlist Sorting Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1195.590 ; gain = 0.000 Phase 1.1 Placer Initialization Netlist Sorting | Checksum: 9761e0e0 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.006 . Memory (MB): peak = 1195.590 ; gain = 0.000 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1195.590 ; gain = 0.000 Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device INFO: [Timing 38-35] Done setting XDC timing constraints. Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: 19236f07e Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1204.129 ; gain = 8.539 Phase 1.3 Build Placer Netlist Model Phase 1.3 Build Placer Netlist Model | Checksum: 1e494ed1a Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1204.129 ; gain = 8.539 Phase 1.4 Constrain Clocks/Macros Phase 1.4 Constrain Clocks/Macros | Checksum: 1e494ed1a Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1204.129 ; gain = 8.539 Phase 1 Placer Initialization | Checksum: 1e494ed1a Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1204.129 ; gain = 8.539 Phase 2 Final Placement Cleanup Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1204.129 ; gain = 0.000 Phase 2 Final Placement Cleanup | Checksum: 1e494ed1a Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1204.129 ; gain = 8.539 INFO: [Place 30-281] No place-able instance is found; design doesn't contain any instance or all instances are placed Ending Placer Task | Checksum: 19236f07e Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1204.129 ; gain = 8.539 INFO: [Common 17-83] Releasing license: Implementation 38 Infos, 1 Warnings, 0 Critical Warnings and 0 Errors encountered. place_design completed successfully Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1204.129 ; gain = 0.000 WARNING: [Constraints 18-5210] No constraints selected for write. Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened. Writing placer database... Writing XDEF routing. Writing XDEF routing logical nets. Writing XDEF routing special nets. Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.122 . Memory (MB): peak = 1204.129 ; gain = 0.000 INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_placed.dcp' has been generated. INFO: [runtcl-4] Executing : report_io -file CPU9bits_io_placed.rpt report_io: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.086 . Memory (MB): peak = 1210.254 ; gain = 6.125 INFO: [runtcl-4] Executing : report_utilization -file CPU9bits_utilization_placed.rpt -pb CPU9bits_utilization_placed.pb INFO: [runtcl-4] Executing : report_control_sets -verbose -file CPU9bits_control_sets_placed.rpt report_control_sets: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.007 . Memory (MB): peak = 1210.254 ; gain = 0.000 Command: route_design Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti' Running DRC as a precondition to command route_design INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Starting Routing Task INFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 2 CPUs Checksum: PlaceDB: fad50f9e ConstDB: 0 ShapeSum: 9761e0e0 RouteDB: 0 Phase 1 Build RT Design Phase 1 Build RT Design | Checksum: ae2d8a92 Time (s): cpu = 00:00:41 ; elapsed = 00:00:30 . Memory (MB): peak = 1436.336 ; gain = 223.395 Post Restoration Checksum: NetGraph: 87f14705 NumContArr: 263c438d Constraints: 0 Timing: 0 Phase 2 Router Initialization INFO: [Route 35-64] No timing constraints were detected. The router will operate in resource-optimization mode. Phase 2.1 Fix Topology Constraints Phase 2.1 Fix Topology Constraints | Checksum: ae2d8a92 Time (s): cpu = 00:00:41 ; elapsed = 00:00:30 . Memory (MB): peak = 1440.074 ; gain = 227.133 Phase 2.2 Pre Route Cleanup Phase 2.2 Pre Route Cleanup | Checksum: ae2d8a92 Time (s): cpu = 00:00:41 ; elapsed = 00:00:30 . Memory (MB): peak = 1440.074 ; gain = 227.133 Number of Nodes with overlaps = 0 Phase 2 Router Initialization | Checksum: 6e1873f8 Time (s): cpu = 00:00:41 ; elapsed = 00:00:31 . Memory (MB): peak = 1448.008 ; gain = 235.066 Phase 3 Initial Routing Number of Nodes with overlaps = 0 Phase 3 Initial Routing | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1452.438 ; gain = 239.496 Phase 4 Rip-up And Reroute Phase 4.1 Global Iteration 0 Phase 4.1 Global Iteration 0 | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1452.438 ; gain = 239.496 Phase 4 Rip-up And Reroute | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1452.438 ; gain = 239.496 Phase 5 Delay and Skew Optimization Phase 5 Delay and Skew Optimization | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1452.438 ; gain = 239.496 Phase 6 Post Hold Fix Phase 6.1 Hold Fix Iter Phase 6.1 Hold Fix Iter | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1452.438 ; gain = 239.496 Phase 6 Post Hold Fix | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1452.438 ; gain = 239.496 Phase 7 Route finalize Router Utilization Summary Global Vertical Routing Utilization = 0 % Global Horizontal Routing Utilization = 0 % Routable Net Status* *Does not include unroutable nets such as driverless and loadless. Run report_route_status for detailed report. Number of Failed Nets = 0 Number of Unrouted Nets = 0 Number of Partially Routed Nets = 0 Number of Node Overlaps = 0 Congestion Report North Dir 1x1 Area, Max Cong = 0%, No Congested Regions. South Dir 1x1 Area, Max Cong = 0%, No Congested Regions. East Dir 1x1 Area, Max Cong = 0%, No Congested Regions. West Dir 1x1 Area, Max Cong = 0%, No Congested Regions. ------------------------------ Reporting congestion hotspots ------------------------------ Direction: North ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Direction: South ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Direction: East ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Direction: West ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Phase 7 Route finalize | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1452.438 ; gain = 239.496 Phase 8 Verifying routed nets Verification completed successfully Phase 8 Verifying routed nets | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1454.441 ; gain = 241.500 Phase 9 Depositing Routes Phase 9 Depositing Routes | Checksum: 6e1873f8 Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1454.441 ; gain = 241.500 INFO: [Route 35-16] Router Completed Successfully Time (s): cpu = 00:00:42 ; elapsed = 00:00:31 . Memory (MB): peak = 1454.441 ; gain = 241.500 Routing Is Done. INFO: [Common 17-83] Releasing license: Implementation 50 Infos, 2 Warnings, 0 Critical Warnings and 0 Errors encountered. route_design completed successfully route_design: Time (s): cpu = 00:00:43 ; elapsed = 00:00:32 . Memory (MB): peak = 1454.441 ; gain = 244.188 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1454.441 ; gain = 0.000 WARNING: [Constraints 18-5210] No constraints selected for write. Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened. Writing placer database... Writing XDEF routing. Writing XDEF routing logical nets. Writing XDEF routing special nets. Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.050 . Memory (MB): peak = 1454.441 ; gain = 0.000 INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_routed.dcp' has been generated. INFO: [runtcl-4] Executing : report_drc -file CPU9bits_drc_routed.rpt -pb CPU9bits_drc_routed.pb -rpx CPU9bits_drc_routed.rpx Command: report_drc -file CPU9bits_drc_routed.rpt -pb CPU9bits_drc_routed.pb -rpx CPU9bits_drc_routed.rpx INFO: [IP_Flow 19-1839] IP Catalog is up to date. INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_drc_routed.rpt. report_drc completed successfully INFO: [runtcl-4] Executing : report_methodology -file CPU9bits_methodology_drc_routed.rpt -pb CPU9bits_methodology_drc_routed.pb -rpx CPU9bits_methodology_drc_routed.rpx Command: report_methodology -file CPU9bits_methodology_drc_routed.rpt -pb CPU9bits_methodology_drc_routed.pb -rpx CPU9bits_methodology_drc_routed.rpx INFO: [Timing 38-35] Done setting XDC timing constraints. INFO: [DRC 23-133] Running Methodology with 2 threads INFO: [Coretcl 2-1520] The results of Report Methodology are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_methodology_drc_routed.rpt. report_methodology completed successfully INFO: [runtcl-4] Executing : report_power -file CPU9bits_power_routed.rpt -pb CPU9bits_power_summary_routed.pb -rpx CPU9bits_power_routed.rpx Command: report_power -file CPU9bits_power_routed.rpt -pb CPU9bits_power_summary_routed.pb -rpx CPU9bits_power_routed.rpx WARNING: [Power 33-232] No user defined clocks were found in the design! Resolution: Please specify clocks using create_clock/create_generated_clock for sequential elements. For pure combinatorial circuits, please specify a virtual clock, otherwise the vectorless estimation might be inaccurate INFO: [Timing 38-35] Done setting XDC timing constraints. Running Vector-less Activity Propagation... Finished Running Vector-less Activity Propagation 61 Infos, 4 Warnings, 0 Critical Warnings and 0 Errors encountered. report_power completed successfully INFO: [runtcl-4] Executing : report_route_status -file CPU9bits_route_status.rpt -pb CPU9bits_route_status.pb INFO: [runtcl-4] Executing : report_timing_summary -max_paths 10 -file CPU9bits_timing_summary_routed.rpt -pb CPU9bits_timing_summary_routed.pb -rpx CPU9bits_timing_summary_routed.rpx -warn_on_violation INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max. INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs WARNING: [Timing 38-313] There are no user specified timing constraints. Timing constraints are needed for proper timing analysis. INFO: [runtcl-4] Executing : report_incremental_reuse -file CPU9bits_incremental_reuse_routed.rpt INFO: [Vivado_Tcl 4-1062] Incremental flow is disabled. No incremental reuse Info to report. INFO: [runtcl-4] Executing : report_clock_utilization -file CPU9bits_clock_utilization_routed.rpt INFO: [runtcl-4] Executing : report_bus_skew -warn_on_violation -file CPU9bits_bus_skew_routed.rpt -pb CPU9bits_bus_skew_routed.pb -rpx CPU9bits_bus_skew_routed.rpx INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max. INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs INFO: [Common 17-206] Exiting Vivado at Wed Mar 13 11:13:49 2019...