#----------------------------------------------------------- # Vivado v2018.3 (64-bit) # SW Build 2405991 on Thu Dec 6 23:38:27 MST 2018 # IP Build 2404404 on Fri Dec 7 01:43:56 MST 2018 # Start of session at: Sun Mar 24 12:13:15 2019 # Process ID: 17128 # Current directory: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1 # Command line: vivado.exe -log CPU9bits.vdi -applog -product Vivado -messageDb vivado.pb -mode batch -source CPU9bits.tcl -notrace # Log file: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits.vdi # Journal file: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1\vivado.jou #----------------------------------------------------------- source CPU9bits.tcl -notrace Command: link_design -top CPU9bits -part xc7k160tifbg484-2L Design is defaulting to srcset: sources_1 Design is defaulting to constrset: constrs_1 INFO: [Project 1-479] Netlist was created with Vivado 2018.3 INFO: [Device 21-403] Loading part xc7k160tifbg484-2L INFO: [Project 1-570] Preparing netlist for logic optimization Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 583.086 ; gain = 0.000 INFO: [Project 1-111] Unisim Transformation Summary: No Unisim elements were transformed. 4 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered. link_design completed successfully link_design: Time (s): cpu = 00:00:07 ; elapsed = 00:00:09 . Memory (MB): peak = 588.664 ; gain = 333.992 Command: opt_design Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti' Running DRC as a precondition to command opt_design Starting DRC Task INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Project 1-461] DRC finished with 0 Errors INFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information. Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 602.465 ; gain = 13.801 Starting Cache Timing Information Task INFO: [Timing 38-35] Done setting XDC timing constraints. Ending Cache Timing Information Task | Checksum: f1482ef8 Time (s): cpu = 00:00:14 ; elapsed = 00:00:15 . Memory (MB): peak = 1139.773 ; gain = 537.309 Starting Logic Optimization Task Phase 1 Retarget INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s). INFO: [Opt 31-49] Retargeted 0 cell(s). Phase 1 Retarget | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.058 . Memory (MB): peak = 1235.660 ; gain = 0.000 INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 0 cells Phase 2 Constant propagation INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s). Phase 2 Constant propagation | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.062 . Memory (MB): peak = 1235.660 ; gain = 0.000 INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 0 cells Phase 3 Sweep Phase 3 Sweep | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.070 . Memory (MB): peak = 1235.660 ; gain = 0.000 INFO: [Opt 31-389] Phase Sweep created 0 cells and removed 0 cells Phase 4 BUFG optimization Phase 4 BUFG optimization | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.075 . Memory (MB): peak = 1235.660 ; gain = 0.000 INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells. Phase 5 Shift Register Optimization Phase 5 Shift Register Optimization | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.135 . Memory (MB): peak = 1235.660 ; gain = 0.000 INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells Phase 6 Post Processing Netlist Phase 6 Post Processing Netlist | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.137 . Memory (MB): peak = 1235.660 ; gain = 0.000 INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cells Opt_design Change Summary ========================= ------------------------------------------------------------------------------------------------------------------------- | Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations | ------------------------------------------------------------------------------------------------------------------------- | Retarget | 0 | 0 | 0 | | Constant propagation | 0 | 0 | 0 | | Sweep | 0 | 0 | 0 | | BUFG optimization | 0 | 0 | 0 | | Shift Register Optimization | 0 | 0 | 0 | | Post Processing Netlist | 0 | 0 | 0 | ------------------------------------------------------------------------------------------------------------------------- Starting Connectivity Check Task Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1235.660 ; gain = 0.000 Ending Logic Optimization Task | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.141 . Memory (MB): peak = 1235.660 ; gain = 0.000 Starting Power Optimization Task INFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns. Ending Power Optimization Task | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.021 . Memory (MB): peak = 1235.660 ; gain = 0.000 Starting Final Cleanup Task Ending Final Cleanup Task | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1235.660 ; gain = 0.000 Starting Netlist Obfuscation Task Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1235.660 ; gain = 0.000 Ending Netlist Obfuscation Task | Checksum: f1482ef8 Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1235.660 ; gain = 0.000 INFO: [Common 17-83] Releasing license: Implementation 20 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered. opt_design completed successfully opt_design: Time (s): cpu = 00:00:17 ; elapsed = 00:00:18 . Memory (MB): peak = 1235.660 ; gain = 646.996 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1235.660 ; gain = 0.000 WARNING: [Constraints 18-5210] No constraints selected for write. Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened. INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_opt.dcp' has been generated. INFO: [runtcl-4] Executing : report_drc -file CPU9bits_drc_opted.rpt -pb CPU9bits_drc_opted.pb -rpx CPU9bits_drc_opted.rpx Command: report_drc -file CPU9bits_drc_opted.rpt -pb CPU9bits_drc_opted.pb -rpx CPU9bits_drc_opted.rpx INFO: [IP_Flow 19-234] Refreshing IP repositories INFO: [IP_Flow 19-1704] No user IP repositories specified INFO: [IP_Flow 19-2313] Loaded Vivado IP repository 'C:/Xilinx/Vivado/2018.3/data/ip'. INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_drc_opted.rpt. report_drc completed successfully report_drc: Time (s): cpu = 00:00:05 ; elapsed = 00:00:05 . Memory (MB): peak = 1235.660 ; gain = 0.000 Command: place_design Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Running DRC as a precondition to command place_design INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Starting Placer Task INFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 2 CPUs Phase 1 Placer Initialization Phase 1.1 Placer Initialization Netlist Sorting Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1235.660 ; gain = 0.000 Phase 1.1 Placer Initialization Netlist Sorting | Checksum: 1567336e Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.018 . Memory (MB): peak = 1235.660 ; gain = 0.000 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1235.660 ; gain = 0.000 Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device INFO: [Timing 38-35] Done setting XDC timing constraints. Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: 17a941b7f Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1249.621 ; gain = 13.961 Phase 1.3 Build Placer Netlist Model Phase 1.3 Build Placer Netlist Model | Checksum: 26f8e950d Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1249.621 ; gain = 13.961 Phase 1.4 Constrain Clocks/Macros Phase 1.4 Constrain Clocks/Macros | Checksum: 26f8e950d Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1249.621 ; gain = 13.961 Phase 1 Placer Initialization | Checksum: 26f8e950d Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1249.621 ; gain = 13.961 Phase 2 Global Placement Phase 2.1 Floorplanning Phase 2.1 Floorplanning | Checksum: 26f8e950d Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1251.242 ; gain = 15.582 WARNING: [Place 46-29] place_design is not in timing mode. Skip physical synthesis in placer Phase 2 Global Placement | Checksum: 23c412f55 Time (s): cpu = 00:00:03 ; elapsed = 00:00:03 . Memory (MB): peak = 1259.777 ; gain = 24.117 Phase 3 Detail Placement Phase 3.1 Commit Multi Column Macros Phase 3.1 Commit Multi Column Macros | Checksum: 23c412f55 Time (s): cpu = 00:00:03 ; elapsed = 00:00:03 . Memory (MB): peak = 1259.777 ; gain = 24.117 Phase 3.2 Commit Most Macros & LUTRAMs Phase 3.2 Commit Most Macros & LUTRAMs | Checksum: 1d49e6787 Time (s): cpu = 00:00:03 ; elapsed = 00:00:03 . Memory (MB): peak = 1259.777 ; gain = 24.117 Phase 3.3 Area Swap Optimization Phase 3.3 Area Swap Optimization | Checksum: 1f2902173 Time (s): cpu = 00:00:03 ; elapsed = 00:00:03 . Memory (MB): peak = 1259.777 ; gain = 24.117 Phase 3.4 Pipeline Register Optimization Phase 3.4 Pipeline Register Optimization | Checksum: 1f2902173 Time (s): cpu = 00:00:03 ; elapsed = 00:00:03 . Memory (MB): peak = 1259.777 ; gain = 24.117 Phase 3.5 Small Shape Detail Placement Phase 3.5 Small Shape Detail Placement | Checksum: 1ebf1de43 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 3.6 Re-assign LUT pins Phase 3.6 Re-assign LUT pins | Checksum: 1ebf1de43 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 3.7 Pipeline Register Optimization Phase 3.7 Pipeline Register Optimization | Checksum: 1ebf1de43 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 3 Detail Placement | Checksum: 1ebf1de43 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 4 Post Placement Optimization and Clean-Up Phase 4.1 Post Commit Optimization Phase 4.1 Post Commit Optimization | Checksum: 1ebf1de43 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 4.2 Post Placement Cleanup Phase 4.2 Post Placement Cleanup | Checksum: 1ebf1de43 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 4.3 Placer Reporting Phase 4.3 Placer Reporting | Checksum: 1ebf1de43 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 4.4 Final Placement Cleanup Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1265.160 ; gain = 0.000 Phase 4.4 Final Placement Cleanup | Checksum: 2030f505c Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Phase 4 Post Placement Optimization and Clean-Up | Checksum: 2030f505c Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 Ending Placer Task | Checksum: 1e052a282 Time (s): cpu = 00:00:04 ; elapsed = 00:00:03 . Memory (MB): peak = 1265.160 ; gain = 29.500 INFO: [Common 17-83] Releasing license: Implementation 37 Infos, 2 Warnings, 0 Critical Warnings and 0 Errors encountered. place_design completed successfully Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1265.160 ; gain = 0.000 WARNING: [Constraints 18-5210] No constraints selected for write. Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened. Writing placer database... Writing XDEF routing. Writing XDEF routing logical nets. Writing XDEF routing special nets. Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.154 . Memory (MB): peak = 1265.160 ; gain = 0.000 INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_placed.dcp' has been generated. INFO: [runtcl-4] Executing : report_io -file CPU9bits_io_placed.rpt report_io: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.081 . Memory (MB): peak = 1265.160 ; gain = 0.000 INFO: [runtcl-4] Executing : report_utilization -file CPU9bits_utilization_placed.rpt -pb CPU9bits_utilization_placed.pb INFO: [runtcl-4] Executing : report_control_sets -verbose -file CPU9bits_control_sets_placed.rpt report_control_sets: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.005 . Memory (MB): peak = 1265.160 ; gain = 0.000 Command: route_design Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti' INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti' Running DRC as a precondition to command route_design INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information. Starting Routing Task INFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 2 CPUs Checksum: PlaceDB: fcede0ea ConstDB: 0 ShapeSum: e364c198 RouteDB: 0 Phase 1 Build RT Design Phase 1 Build RT Design | Checksum: a20ae9a4 Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1476.469 ; gain = 211.309 Post Restoration Checksum: NetGraph: 3b777e71 NumContArr: 66936b33 Constraints: 0 Timing: 0 Phase 2 Router Initialization INFO: [Route 35-64] No timing constraints were detected. The router will operate in resource-optimization mode. Phase 2.1 Fix Topology Constraints Phase 2.1 Fix Topology Constraints | Checksum: a20ae9a4 Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1480.309 ; gain = 215.148 Phase 2.2 Pre Route Cleanup Phase 2.2 Pre Route Cleanup | Checksum: a20ae9a4 Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1480.309 ; gain = 215.148 Number of Nodes with overlaps = 0 Phase 2 Router Initialization | Checksum: 1a5c1a8b2 Time (s): cpu = 00:00:43 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 3 Initial Routing Phase 3 Initial Routing | Checksum: 17f11ca01 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 4 Rip-up And Reroute Phase 4.1 Global Iteration 0 Number of Nodes with overlaps = 0 Phase 4.1 Global Iteration 0 | Checksum: c2af15c4 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 4 Rip-up And Reroute | Checksum: c2af15c4 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 5 Delay and Skew Optimization Phase 5 Delay and Skew Optimization | Checksum: c2af15c4 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 6 Post Hold Fix Phase 6.1 Hold Fix Iter Phase 6.1 Hold Fix Iter | Checksum: c2af15c4 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 6 Post Hold Fix | Checksum: c2af15c4 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 7 Route finalize Router Utilization Summary Global Vertical Routing Utilization = 2.61131e-05 % Global Horizontal Routing Utilization = 0.000170503 % Routable Net Status* *Does not include unroutable nets such as driverless and loadless. Run report_route_status for detailed report. Number of Failed Nets = 0 Number of Unrouted Nets = 0 Number of Partially Routed Nets = 0 Number of Node Overlaps = 0 Congestion Report North Dir 1x1 Area, Max Cong = 0.900901%, No Congested Regions. South Dir 1x1 Area, Max Cong = 0%, No Congested Regions. East Dir 1x1 Area, Max Cong = 1.47059%, No Congested Regions. West Dir 1x1 Area, Max Cong = 1.47059%, No Congested Regions. ------------------------------ Reporting congestion hotspots ------------------------------ Direction: North ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Direction: South ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Direction: East ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Direction: West ---------------- Congested clusters found at Level 0 Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0 Phase 7 Route finalize | Checksum: c2af15c4 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 8 Verifying routed nets Verification completed successfully Phase 8 Verifying routed nets | Checksum: c2af15c4 Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Phase 9 Depositing Routes Phase 9 Depositing Routes | Checksum: 13df7b04c Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 INFO: [Route 35-16] Router Completed Successfully Time (s): cpu = 00:00:44 ; elapsed = 00:00:33 . Memory (MB): peak = 1504.426 ; gain = 239.266 Routing Is Done. INFO: [Common 17-83] Releasing license: Implementation 49 Infos, 3 Warnings, 0 Critical Warnings and 0 Errors encountered. route_design completed successfully route_design: Time (s): cpu = 00:00:47 ; elapsed = 00:00:35 . Memory (MB): peak = 1504.426 ; gain = 239.266 Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1504.426 ; gain = 0.000 WARNING: [Constraints 18-5210] No constraints selected for write. Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened. Writing placer database... Writing XDEF routing. Writing XDEF routing logical nets. Writing XDEF routing special nets. Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.054 . Memory (MB): peak = 1504.426 ; gain = 0.000 INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_routed.dcp' has been generated. INFO: [runtcl-4] Executing : report_drc -file CPU9bits_drc_routed.rpt -pb CPU9bits_drc_routed.pb -rpx CPU9bits_drc_routed.rpx Command: report_drc -file CPU9bits_drc_routed.rpt -pb CPU9bits_drc_routed.pb -rpx CPU9bits_drc_routed.rpx INFO: [IP_Flow 19-1839] IP Catalog is up to date. INFO: [DRC 23-27] Running DRC with 2 threads INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_drc_routed.rpt. report_drc completed successfully INFO: [runtcl-4] Executing : report_methodology -file CPU9bits_methodology_drc_routed.rpt -pb CPU9bits_methodology_drc_routed.pb -rpx CPU9bits_methodology_drc_routed.rpx Command: report_methodology -file CPU9bits_methodology_drc_routed.rpt -pb CPU9bits_methodology_drc_routed.pb -rpx CPU9bits_methodology_drc_routed.rpx INFO: [Timing 38-35] Done setting XDC timing constraints. INFO: [DRC 23-133] Running Methodology with 2 threads INFO: [Coretcl 2-1520] The results of Report Methodology are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/CPU9bits_methodology_drc_routed.rpt. report_methodology completed successfully INFO: [runtcl-4] Executing : report_power -file CPU9bits_power_routed.rpt -pb CPU9bits_power_summary_routed.pb -rpx CPU9bits_power_routed.rpx Command: report_power -file CPU9bits_power_routed.rpt -pb CPU9bits_power_summary_routed.pb -rpx CPU9bits_power_routed.rpx WARNING: [Power 33-232] No user defined clocks were found in the design! Resolution: Please specify clocks using create_clock/create_generated_clock for sequential elements. For pure combinatorial circuits, please specify a virtual clock, otherwise the vectorless estimation might be inaccurate INFO: [Timing 38-35] Done setting XDC timing constraints. Running Vector-less Activity Propagation... Finished Running Vector-less Activity Propagation 60 Infos, 5 Warnings, 0 Critical Warnings and 0 Errors encountered. report_power completed successfully INFO: [runtcl-4] Executing : report_route_status -file CPU9bits_route_status.rpt -pb CPU9bits_route_status.pb INFO: [runtcl-4] Executing : report_timing_summary -max_paths 10 -file CPU9bits_timing_summary_routed.rpt -pb CPU9bits_timing_summary_routed.pb -rpx CPU9bits_timing_summary_routed.rpx -warn_on_violation INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max. INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs WARNING: [Timing 38-313] There are no user specified timing constraints. Timing constraints are needed for proper timing analysis. INFO: [runtcl-4] Executing : report_incremental_reuse -file CPU9bits_incremental_reuse_routed.rpt INFO: [Vivado_Tcl 4-1062] Incremental flow is disabled. No incremental reuse Info to report. INFO: [runtcl-4] Executing : report_clock_utilization -file CPU9bits_clock_utilization_routed.rpt INFO: [runtcl-4] Executing : report_bus_skew -warn_on_violation -file CPU9bits_bus_skew_routed.rpt -pb CPU9bits_bus_skew_routed.pb -rpx CPU9bits_bus_skew_routed.rpx INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max. INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs INFO: [Common 17-206] Exiting Vivado at Sun Mar 24 12:14:37 2019...