381 lines
20 KiB
Plaintext
381 lines
20 KiB
Plaintext
#-----------------------------------------------------------
|
|
# Vivado v2018.3 (64-bit)
|
|
# SW Build 2405991 on Thu Dec 6 23:38:27 MST 2018
|
|
# IP Build 2404404 on Fri Dec 7 01:43:56 MST 2018
|
|
# Start of session at: Fri Feb 15 12:30:55 2019
|
|
# Process ID: 11860
|
|
# Current directory: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1
|
|
# Command line: vivado.exe -log RegFile.vdi -applog -product Vivado -messageDb vivado.pb -mode batch -source RegFile.tcl -notrace
|
|
# Log file: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/RegFile.vdi
|
|
# Journal file: C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1\vivado.jou
|
|
#-----------------------------------------------------------
|
|
source RegFile.tcl -notrace
|
|
Command: link_design -top RegFile -part xc7k160tifbg484-2L
|
|
Design is defaulting to srcset: sources_1
|
|
Design is defaulting to constrset: constrs_1
|
|
INFO: [Project 1-479] Netlist was created with Vivado 2018.3
|
|
INFO: [Device 21-403] Loading part xc7k160tifbg484-2L
|
|
INFO: [Project 1-570] Preparing netlist for logic optimization
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 583.539 ; gain = 0.000
|
|
INFO: [Project 1-111] Unisim Transformation Summary:
|
|
No Unisim elements were transformed.
|
|
|
|
4 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
link_design completed successfully
|
|
link_design: Time (s): cpu = 00:00:07 ; elapsed = 00:00:08 . Memory (MB): peak = 589.113 ; gain = 334.250
|
|
Command: opt_design
|
|
Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
Running DRC as a precondition to command opt_design
|
|
|
|
Starting DRC Task
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Project 1-461] DRC finished with 0 Errors
|
|
INFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information.
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 603.453 ; gain = 14.340
|
|
|
|
Starting Cache Timing Information Task
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
Ending Cache Timing Information Task | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:14 ; elapsed = 00:00:15 . Memory (MB): peak = 1128.941 ; gain = 525.488
|
|
|
|
Starting Logic Optimization Task
|
|
|
|
Phase 1 Retarget
|
|
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
|
|
INFO: [Opt 31-49] Retargeted 0 cell(s).
|
|
Phase 1 Retarget | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.056 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 0 cells
|
|
|
|
Phase 2 Constant propagation
|
|
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
|
|
Phase 2 Constant propagation | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.060 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 0 cells
|
|
|
|
Phase 3 Sweep
|
|
Phase 3 Sweep | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.067 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Sweep created 0 cells and removed 0 cells
|
|
|
|
Phase 4 BUFG optimization
|
|
Phase 4 BUFG optimization | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.071 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells.
|
|
|
|
Phase 5 Shift Register Optimization
|
|
Phase 5 Shift Register Optimization | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.124 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells
|
|
|
|
Phase 6 Post Processing Netlist
|
|
Phase 6 Post Processing Netlist | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.126 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cells
|
|
Opt_design Change Summary
|
|
=========================
|
|
|
|
|
|
-------------------------------------------------------------------------------------------------------------------------
|
|
| Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations |
|
|
-------------------------------------------------------------------------------------------------------------------------
|
|
| Retarget | 0 | 0 | 0 |
|
|
| Constant propagation | 0 | 0 | 0 |
|
|
| Sweep | 0 | 0 | 0 |
|
|
| BUFG optimization | 0 | 0 | 0 |
|
|
| Shift Register Optimization | 0 | 0 | 0 |
|
|
| Post Processing Netlist | 0 | 0 | 0 |
|
|
-------------------------------------------------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Starting Connectivity Check Task
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
Ending Logic Optimization Task | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.129 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
|
|
Starting Power Optimization Task
|
|
INFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns.
|
|
Ending Power Optimization Task | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.021 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
|
|
Starting Final Cleanup Task
|
|
Ending Final Cleanup Task | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
|
|
Starting Netlist Obfuscation Task
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
Ending Netlist Obfuscation Task | Checksum: aad14af3
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
INFO: [Common 17-83] Releasing license: Implementation
|
|
20 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
opt_design completed successfully
|
|
opt_design: Time (s): cpu = 00:00:17 ; elapsed = 00:00:18 . Memory (MB): peak = 1225.754 ; gain = 636.641
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
WARNING: [Constraints 18-5210] No constraints selected for write.
|
|
Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened.
|
|
INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/RegFile_opt.dcp' has been generated.
|
|
INFO: [runtcl-4] Executing : report_drc -file RegFile_drc_opted.rpt -pb RegFile_drc_opted.pb -rpx RegFile_drc_opted.rpx
|
|
Command: report_drc -file RegFile_drc_opted.rpt -pb RegFile_drc_opted.pb -rpx RegFile_drc_opted.rpx
|
|
INFO: [IP_Flow 19-234] Refreshing IP repositories
|
|
INFO: [IP_Flow 19-1704] No user IP repositories specified
|
|
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository 'C:/Xilinx/Vivado/2018.3/data/ip'.
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/RegFile_drc_opted.rpt.
|
|
report_drc completed successfully
|
|
Command: place_design
|
|
Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
|
|
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
|
|
Running DRC as a precondition to command place_design
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
|
|
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
|
|
|
|
Starting Placer Task
|
|
INFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 2 CPUs
|
|
|
|
Phase 1 Placer Initialization
|
|
|
|
Phase 1.1 Placer Initialization Netlist Sorting
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
Phase 1.1 Placer Initialization Netlist Sorting | Checksum: 7fa8ebe0
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.021 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1225.754 ; gain = 0.000
|
|
|
|
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: ae3aece4
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1238.875 ; gain = 13.121
|
|
|
|
Phase 1.3 Build Placer Netlist Model
|
|
Phase 1.3 Build Placer Netlist Model | Checksum: 182815a23
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1238.875 ; gain = 13.121
|
|
|
|
Phase 1.4 Constrain Clocks/Macros
|
|
Phase 1.4 Constrain Clocks/Macros | Checksum: 182815a23
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1238.875 ; gain = 13.121
|
|
Phase 1 Placer Initialization | Checksum: 182815a23
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1238.875 ; gain = 13.121
|
|
|
|
Phase 2 Final Placement Cleanup
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1238.875 ; gain = 0.000
|
|
Phase 2 Final Placement Cleanup | Checksum: 182815a23
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1238.875 ; gain = 13.121
|
|
INFO: [Place 30-281] No place-able instance is found; design doesn't contain any instance or all instances are placed
|
|
Ending Placer Task | Checksum: ae3aece4
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1238.875 ; gain = 13.121
|
|
INFO: [Common 17-83] Releasing license: Implementation
|
|
38 Infos, 1 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
place_design completed successfully
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1238.875 ; gain = 0.000
|
|
WARNING: [Constraints 18-5210] No constraints selected for write.
|
|
Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened.
|
|
Writing placer database...
|
|
Writing XDEF routing.
|
|
Writing XDEF routing logical nets.
|
|
Writing XDEF routing special nets.
|
|
Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.151 . Memory (MB): peak = 1238.875 ; gain = 0.000
|
|
INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/RegFile_placed.dcp' has been generated.
|
|
INFO: [runtcl-4] Executing : report_io -file RegFile_io_placed.rpt
|
|
report_io: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.112 . Memory (MB): peak = 1243.988 ; gain = 5.113
|
|
INFO: [runtcl-4] Executing : report_utilization -file RegFile_utilization_placed.rpt -pb RegFile_utilization_placed.pb
|
|
INFO: [runtcl-4] Executing : report_control_sets -verbose -file RegFile_control_sets_placed.rpt
|
|
report_control_sets: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.006 . Memory (MB): peak = 1243.988 ; gain = 0.000
|
|
Command: route_design
|
|
Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
Running DRC as a precondition to command route_design
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
|
|
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
|
|
|
|
|
|
Starting Routing Task
|
|
INFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 2 CPUs
|
|
Checksum: PlaceDB: 2e920104 ConstDB: 0 ShapeSum: 7fa8ebe0 RouteDB: 0
|
|
|
|
Phase 1 Build RT Design
|
|
Phase 1 Build RT Design | Checksum: ccf0732b
|
|
|
|
Time (s): cpu = 00:00:41 ; elapsed = 00:00:31 . Memory (MB): peak = 1467.336 ; gain = 220.660
|
|
Post Restoration Checksum: NetGraph: 2e7f4797 NumContArr: 9e712b94 Constraints: 0 Timing: 0
|
|
|
|
Phase 2 Router Initialization
|
|
INFO: [Route 35-64] No timing constraints were detected. The router will operate in resource-optimization mode.
|
|
|
|
Phase 2.1 Fix Topology Constraints
|
|
Phase 2.1 Fix Topology Constraints | Checksum: ccf0732b
|
|
|
|
Time (s): cpu = 00:00:41 ; elapsed = 00:00:31 . Memory (MB): peak = 1471.402 ; gain = 224.727
|
|
|
|
Phase 2.2 Pre Route Cleanup
|
|
Phase 2.2 Pre Route Cleanup | Checksum: ccf0732b
|
|
|
|
Time (s): cpu = 00:00:41 ; elapsed = 00:00:31 . Memory (MB): peak = 1471.402 ; gain = 224.727
|
|
Number of Nodes with overlaps = 0
|
|
Phase 2 Router Initialization | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:41 ; elapsed = 00:00:31 . Memory (MB): peak = 1478.180 ; gain = 231.504
|
|
|
|
Phase 3 Initial Routing
|
|
Number of Nodes with overlaps = 0
|
|
Phase 3 Initial Routing | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1482.605 ; gain = 235.930
|
|
|
|
Phase 4 Rip-up And Reroute
|
|
|
|
Phase 4.1 Global Iteration 0
|
|
Phase 4.1 Global Iteration 0 | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1482.605 ; gain = 235.930
|
|
Phase 4 Rip-up And Reroute | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1482.605 ; gain = 235.930
|
|
|
|
Phase 5 Delay and Skew Optimization
|
|
Phase 5 Delay and Skew Optimization | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1482.605 ; gain = 235.930
|
|
|
|
Phase 6 Post Hold Fix
|
|
|
|
Phase 6.1 Hold Fix Iter
|
|
Phase 6.1 Hold Fix Iter | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1482.605 ; gain = 235.930
|
|
Phase 6 Post Hold Fix | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1482.605 ; gain = 235.930
|
|
|
|
Phase 7 Route finalize
|
|
|
|
Router Utilization Summary
|
|
Global Vertical Routing Utilization = 0 %
|
|
Global Horizontal Routing Utilization = 0 %
|
|
Routable Net Status*
|
|
*Does not include unroutable nets such as driverless and loadless.
|
|
Run report_route_status for detailed report.
|
|
Number of Failed Nets = 0
|
|
Number of Unrouted Nets = 0
|
|
Number of Partially Routed Nets = 0
|
|
Number of Node Overlaps = 0
|
|
|
|
Congestion Report
|
|
North Dir 1x1 Area, Max Cong = 0%, No Congested Regions.
|
|
South Dir 1x1 Area, Max Cong = 0%, No Congested Regions.
|
|
East Dir 1x1 Area, Max Cong = 0%, No Congested Regions.
|
|
West Dir 1x1 Area, Max Cong = 0%, No Congested Regions.
|
|
|
|
------------------------------
|
|
Reporting congestion hotspots
|
|
------------------------------
|
|
Direction: North
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
Direction: South
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
Direction: East
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
Direction: West
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
|
|
Phase 7 Route finalize | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1482.605 ; gain = 235.930
|
|
|
|
Phase 8 Verifying routed nets
|
|
|
|
Verification completed successfully
|
|
Phase 8 Verifying routed nets | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1484.613 ; gain = 237.938
|
|
|
|
Phase 9 Depositing Routes
|
|
Phase 9 Depositing Routes | Checksum: b146062c
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1484.613 ; gain = 237.938
|
|
INFO: [Route 35-16] Router Completed Successfully
|
|
|
|
Time (s): cpu = 00:00:42 ; elapsed = 00:00:32 . Memory (MB): peak = 1484.613 ; gain = 237.938
|
|
|
|
Routing Is Done.
|
|
INFO: [Common 17-83] Releasing license: Implementation
|
|
50 Infos, 2 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
route_design completed successfully
|
|
route_design: Time (s): cpu = 00:00:45 ; elapsed = 00:00:33 . Memory (MB): peak = 1484.613 ; gain = 240.625
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1484.613 ; gain = 0.000
|
|
WARNING: [Constraints 18-5210] No constraints selected for write.
|
|
Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened.
|
|
Writing placer database...
|
|
Writing XDEF routing.
|
|
Writing XDEF routing logical nets.
|
|
Writing XDEF routing special nets.
|
|
Write XDEF Complete: Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.058 . Memory (MB): peak = 1484.613 ; gain = 0.000
|
|
INFO: [Common 17-1381] The checkpoint 'C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/RegFile_routed.dcp' has been generated.
|
|
INFO: [runtcl-4] Executing : report_drc -file RegFile_drc_routed.rpt -pb RegFile_drc_routed.pb -rpx RegFile_drc_routed.rpx
|
|
Command: report_drc -file RegFile_drc_routed.rpt -pb RegFile_drc_routed.pb -rpx RegFile_drc_routed.rpx
|
|
INFO: [IP_Flow 19-1839] IP Catalog is up to date.
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/RegFile_drc_routed.rpt.
|
|
report_drc completed successfully
|
|
INFO: [runtcl-4] Executing : report_methodology -file RegFile_methodology_drc_routed.rpt -pb RegFile_methodology_drc_routed.pb -rpx RegFile_methodology_drc_routed.rpx
|
|
Command: report_methodology -file RegFile_methodology_drc_routed.rpt -pb RegFile_methodology_drc_routed.pb -rpx RegFile_methodology_drc_routed.rpx
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
INFO: [DRC 23-133] Running Methodology with 2 threads
|
|
INFO: [Coretcl 2-1520] The results of Report Methodology are in file C:/Users/JoseIgnacio/CA Lab/lab2CA.runs/impl_1/RegFile_methodology_drc_routed.rpt.
|
|
report_methodology completed successfully
|
|
INFO: [runtcl-4] Executing : report_power -file RegFile_power_routed.rpt -pb RegFile_power_summary_routed.pb -rpx RegFile_power_routed.rpx
|
|
Command: report_power -file RegFile_power_routed.rpt -pb RegFile_power_summary_routed.pb -rpx RegFile_power_routed.rpx
|
|
WARNING: [Power 33-232] No user defined clocks were found in the design!
|
|
Resolution: Please specify clocks using create_clock/create_generated_clock for sequential elements. For pure combinatorial circuits, please specify a virtual clock, otherwise the vectorless estimation might be inaccurate
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
Running Vector-less Activity Propagation...
|
|
|
|
Finished Running Vector-less Activity Propagation
|
|
61 Infos, 4 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
report_power completed successfully
|
|
INFO: [runtcl-4] Executing : report_route_status -file RegFile_route_status.rpt -pb RegFile_route_status.pb
|
|
INFO: [runtcl-4] Executing : report_timing_summary -max_paths 10 -file RegFile_timing_summary_routed.rpt -pb RegFile_timing_summary_routed.pb -rpx RegFile_timing_summary_routed.rpx -warn_on_violation
|
|
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max.
|
|
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs
|
|
WARNING: [Timing 38-313] There are no user specified timing constraints. Timing constraints are needed for proper timing analysis.
|
|
INFO: [runtcl-4] Executing : report_incremental_reuse -file RegFile_incremental_reuse_routed.rpt
|
|
INFO: [Vivado_Tcl 4-1062] Incremental flow is disabled. No incremental reuse Info to report.
|
|
INFO: [runtcl-4] Executing : report_clock_utilization -file RegFile_clock_utilization_routed.rpt
|
|
INFO: [runtcl-4] Executing : report_bus_skew -warn_on_violation -file RegFile_bus_skew_routed.rpt -pb RegFile_bus_skew_routed.pb -rpx RegFile_bus_skew_routed.rpx
|
|
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max.
|
|
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs
|
|
INFO: [Common 17-206] Exiting Vivado at Fri Feb 15 12:32:12 2019...
|