452 lines
23 KiB
Plaintext
452 lines
23 KiB
Plaintext
#-----------------------------------------------------------
|
|
# Vivado v2018.3 (64-bit)
|
|
# SW Build 2405991 on Thu Dec 6 23:38:27 MST 2018
|
|
# IP Build 2404404 on Fri Dec 7 01:43:56 MST 2018
|
|
# Start of session at: Wed Feb 20 11:36:21 2019
|
|
# Process ID: 644
|
|
# Current directory: C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1
|
|
# Command line: vivado.exe -log FetchUnit.vdi -applog -product Vivado -messageDb vivado.pb -mode batch -source FetchUnit.tcl -notrace
|
|
# Log file: C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1/FetchUnit.vdi
|
|
# Journal file: C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1\vivado.jou
|
|
#-----------------------------------------------------------
|
|
source FetchUnit.tcl -notrace
|
|
Command: link_design -top FetchUnit -part xc7k160tifbg484-2L
|
|
Design is defaulting to srcset: sources_1
|
|
Design is defaulting to constrset: constrs_1
|
|
INFO: [Project 1-479] Netlist was created with Vivado 2018.3
|
|
INFO: [Device 21-403] Loading part xc7k160tifbg484-2L
|
|
INFO: [Project 1-570] Preparing netlist for logic optimization
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 577.652 ; gain = 0.000
|
|
INFO: [Project 1-111] Unisim Transformation Summary:
|
|
No Unisim elements were transformed.
|
|
|
|
4 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
link_design completed successfully
|
|
link_design: Time (s): cpu = 00:00:06 ; elapsed = 00:00:16 . Memory (MB): peak = 583.164 ; gain = 318.402
|
|
Command: opt_design
|
|
Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
Running DRC as a precondition to command opt_design
|
|
|
|
Starting DRC Task
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Project 1-461] DRC finished with 0 Errors
|
|
INFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information.
|
|
|
|
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.704 . Memory (MB): peak = 597.828 ; gain = 14.664
|
|
|
|
Starting Cache Timing Information Task
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
Ending Cache Timing Information Task | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:09 ; elapsed = 00:00:10 . Memory (MB): peak = 1157.887 ; gain = 560.059
|
|
|
|
Starting Logic Optimization Task
|
|
|
|
Phase 1 Retarget
|
|
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
|
|
INFO: [Opt 31-49] Retargeted 0 cell(s).
|
|
Phase 1 Retarget | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.027 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 0 cells
|
|
|
|
Phase 2 Constant propagation
|
|
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
|
|
Phase 2 Constant propagation | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.028 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 0 cells
|
|
|
|
Phase 3 Sweep
|
|
Phase 3 Sweep | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.030 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Sweep created 0 cells and removed 0 cells
|
|
|
|
Phase 4 BUFG optimization
|
|
Phase 4 BUFG optimization | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.032 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells.
|
|
|
|
Phase 5 Shift Register Optimization
|
|
Phase 5 Shift Register Optimization | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.072 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells
|
|
|
|
Phase 6 Post Processing Netlist
|
|
Phase 6 Post Processing Netlist | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.073 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cells
|
|
Opt_design Change Summary
|
|
=========================
|
|
|
|
|
|
-------------------------------------------------------------------------------------------------------------------------
|
|
| Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations |
|
|
-------------------------------------------------------------------------------------------------------------------------
|
|
| Retarget | 0 | 0 | 0 |
|
|
| Constant propagation | 0 | 0 | 0 |
|
|
| Sweep | 0 | 0 | 0 |
|
|
| BUFG optimization | 0 | 0 | 0 |
|
|
| Shift Register Optimization | 0 | 0 | 0 |
|
|
| Post Processing Netlist | 0 | 0 | 0 |
|
|
-------------------------------------------------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Starting Connectivity Check Task
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
Ending Logic Optimization Task | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.075 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
|
|
Starting Power Optimization Task
|
|
INFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns.
|
|
Ending Power Optimization Task | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.010 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
|
|
Starting Final Cleanup Task
|
|
Ending Final Cleanup Task | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
|
|
Starting Netlist Obfuscation Task
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
Ending Netlist Obfuscation Task | Checksum: 6a15e7bd
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
INFO: [Common 17-83] Releasing license: Implementation
|
|
20 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
opt_design completed successfully
|
|
opt_design: Time (s): cpu = 00:00:11 ; elapsed = 00:00:12 . Memory (MB): peak = 1254.445 ; gain = 671.281
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
WARNING: [Constraints 18-5210] No constraints selected for write.
|
|
Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened.
|
|
INFO: [Common 17-1381] The checkpoint 'C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1/FetchUnit_opt.dcp' has been generated.
|
|
INFO: [runtcl-4] Executing : report_drc -file FetchUnit_drc_opted.rpt -pb FetchUnit_drc_opted.pb -rpx FetchUnit_drc_opted.rpx
|
|
Command: report_drc -file FetchUnit_drc_opted.rpt -pb FetchUnit_drc_opted.pb -rpx FetchUnit_drc_opted.rpx
|
|
INFO: [IP_Flow 19-234] Refreshing IP repositories
|
|
INFO: [IP_Flow 19-1704] No user IP repositories specified
|
|
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository 'C:/Xilinx/Vivado/2018.3/data/ip'.
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1/FetchUnit_drc_opted.rpt.
|
|
report_drc completed successfully
|
|
Command: place_design
|
|
Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
|
|
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
|
|
Running DRC as a precondition to command place_design
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
|
|
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
|
|
|
|
Starting Placer Task
|
|
INFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 2 CPUs
|
|
|
|
Phase 1 Placer Initialization
|
|
|
|
Phase 1.1 Placer Initialization Netlist Sorting
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
Phase 1.1 Placer Initialization Netlist Sorting | Checksum: 2dee624c
|
|
|
|
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.005 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.001 . Memory (MB): peak = 1254.445 ; gain = 0.000
|
|
|
|
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: f86a639b
|
|
|
|
Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1260.988 ; gain = 6.543
|
|
|
|
Phase 1.3 Build Placer Netlist Model
|
|
Phase 1.3 Build Placer Netlist Model | Checksum: 1b3769117
|
|
|
|
Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1260.988 ; gain = 6.543
|
|
|
|
Phase 1.4 Constrain Clocks/Macros
|
|
Phase 1.4 Constrain Clocks/Macros | Checksum: 1b3769117
|
|
|
|
Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1260.988 ; gain = 6.543
|
|
Phase 1 Placer Initialization | Checksum: 1b3769117
|
|
|
|
Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1260.988 ; gain = 6.543
|
|
|
|
Phase 2 Global Placement
|
|
|
|
Phase 2.1 Floorplanning
|
|
Phase 2.1 Floorplanning | Checksum: 1b3769117
|
|
|
|
Time (s): cpu = 00:00:01 ; elapsed = 00:00:01 . Memory (MB): peak = 1262.563 ; gain = 8.117
|
|
WARNING: [Place 46-29] place_design is not in timing mode. Skip physical synthesis in placer
|
|
Phase 2 Global Placement | Checksum: fdf1e15d
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 1271.574 ; gain = 17.129
|
|
|
|
Phase 3 Detail Placement
|
|
|
|
Phase 3.1 Commit Multi Column Macros
|
|
Phase 3.1 Commit Multi Column Macros | Checksum: fdf1e15d
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 1271.574 ; gain = 17.129
|
|
|
|
Phase 3.2 Commit Most Macros & LUTRAMs
|
|
Phase 3.2 Commit Most Macros & LUTRAMs | Checksum: 172140857
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 1271.574 ; gain = 17.129
|
|
|
|
Phase 3.3 Area Swap Optimization
|
|
Phase 3.3 Area Swap Optimization | Checksum: 18b28c28e
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 1271.574 ; gain = 17.129
|
|
|
|
Phase 3.4 Pipeline Register Optimization
|
|
Phase 3.4 Pipeline Register Optimization | Checksum: 18b28c28e
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 1271.574 ; gain = 17.129
|
|
|
|
Phase 3.5 Small Shape Detail Placement
|
|
Phase 3.5 Small Shape Detail Placement | Checksum: 1814d396b
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
|
|
Phase 3.6 Re-assign LUT pins
|
|
Phase 3.6 Re-assign LUT pins | Checksum: 1814d396b
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
|
|
Phase 3.7 Pipeline Register Optimization
|
|
Phase 3.7 Pipeline Register Optimization | Checksum: 1814d396b
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
Phase 3 Detail Placement | Checksum: 1814d396b
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
|
|
Phase 4 Post Placement Optimization and Clean-Up
|
|
|
|
Phase 4.1 Post Commit Optimization
|
|
Phase 4.1 Post Commit Optimization | Checksum: 1814d396b
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
|
|
Phase 4.2 Post Placement Cleanup
|
|
Phase 4.2 Post Placement Cleanup | Checksum: 1814d396b
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
|
|
Phase 4.3 Placer Reporting
|
|
Phase 4.3 Placer Reporting | Checksum: 1814d396b
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
|
|
Phase 4.4 Final Placement Cleanup
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1281.449 ; gain = 0.000
|
|
Phase 4.4 Final Placement Cleanup | Checksum: 20047366c
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
Phase 4 Post Placement Optimization and Clean-Up | Checksum: 20047366c
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
Ending Placer Task | Checksum: 127ea04eb
|
|
|
|
Time (s): cpu = 00:00:02 ; elapsed = 00:00:02 . Memory (MB): peak = 1281.449 ; gain = 27.004
|
|
INFO: [Common 17-83] Releasing license: Implementation
|
|
37 Infos, 2 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
place_design completed successfully
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1281.449 ; gain = 0.000
|
|
WARNING: [Constraints 18-5210] No constraints selected for write.
|
|
Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened.
|
|
Writing placer database...
|
|
Writing XDEF routing.
|
|
Writing XDEF routing logical nets.
|
|
Writing XDEF routing special nets.
|
|
Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.099 . Memory (MB): peak = 1281.449 ; gain = 0.000
|
|
INFO: [Common 17-1381] The checkpoint 'C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1/FetchUnit_placed.dcp' has been generated.
|
|
INFO: [runtcl-4] Executing : report_io -file FetchUnit_io_placed.rpt
|
|
report_io: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.058 . Memory (MB): peak = 1281.449 ; gain = 0.000
|
|
INFO: [runtcl-4] Executing : report_utilization -file FetchUnit_utilization_placed.rpt -pb FetchUnit_utilization_placed.pb
|
|
INFO: [runtcl-4] Executing : report_control_sets -verbose -file FetchUnit_control_sets_placed.rpt
|
|
report_control_sets: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.002 . Memory (MB): peak = 1281.449 ; gain = 0.000
|
|
Command: route_design
|
|
Attempting to get a license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7k160ti'
|
|
Running DRC as a precondition to command route_design
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
|
|
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
|
|
|
|
|
|
Starting Routing Task
|
|
INFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 2 CPUs
|
|
Checksum: PlaceDB: 884dbbb5 ConstDB: 0 ShapeSum: 9f9c4936 RouteDB: 0
|
|
|
|
Phase 1 Build RT Design
|
|
Phase 1 Build RT Design | Checksum: c942aae2
|
|
|
|
Time (s): cpu = 00:00:27 ; elapsed = 00:00:22 . Memory (MB): peak = 1488.156 ; gain = 206.707
|
|
Post Restoration Checksum: NetGraph: 96738515 NumContArr: 32cf25cd Constraints: 0 Timing: 0
|
|
|
|
Phase 2 Router Initialization
|
|
INFO: [Route 35-64] No timing constraints were detected. The router will operate in resource-optimization mode.
|
|
|
|
Phase 2.1 Fix Topology Constraints
|
|
Phase 2.1 Fix Topology Constraints | Checksum: c942aae2
|
|
|
|
Time (s): cpu = 00:00:27 ; elapsed = 00:00:22 . Memory (MB): peak = 1492.688 ; gain = 211.238
|
|
|
|
Phase 2.2 Pre Route Cleanup
|
|
Phase 2.2 Pre Route Cleanup | Checksum: c942aae2
|
|
|
|
Time (s): cpu = 00:00:27 ; elapsed = 00:00:22 . Memory (MB): peak = 1492.688 ; gain = 211.238
|
|
Number of Nodes with overlaps = 0
|
|
Phase 2 Router Initialization | Checksum: a27c41a8
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:22 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Phase 3 Initial Routing
|
|
Phase 3 Initial Routing | Checksum: 15301da77
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:22 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Phase 4 Rip-up And Reroute
|
|
|
|
Phase 4.1 Global Iteration 0
|
|
Number of Nodes with overlaps = 1
|
|
Number of Nodes with overlaps = 0
|
|
Phase 4.1 Global Iteration 0 | Checksum: af31d432
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
Phase 4 Rip-up And Reroute | Checksum: af31d432
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Phase 5 Delay and Skew Optimization
|
|
Phase 5 Delay and Skew Optimization | Checksum: af31d432
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Phase 6 Post Hold Fix
|
|
|
|
Phase 6.1 Hold Fix Iter
|
|
Phase 6.1 Hold Fix Iter | Checksum: af31d432
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
Phase 6 Post Hold Fix | Checksum: af31d432
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Phase 7 Route finalize
|
|
|
|
Router Utilization Summary
|
|
Global Vertical Routing Utilization = 0.00297689 %
|
|
Global Horizontal Routing Utilization = 0.00221654 %
|
|
Routable Net Status*
|
|
*Does not include unroutable nets such as driverless and loadless.
|
|
Run report_route_status for detailed report.
|
|
Number of Failed Nets = 0
|
|
Number of Unrouted Nets = 0
|
|
Number of Partially Routed Nets = 0
|
|
Number of Node Overlaps = 0
|
|
|
|
Congestion Report
|
|
North Dir 1x1 Area, Max Cong = 2.7027%, No Congested Regions.
|
|
South Dir 1x1 Area, Max Cong = 25.2252%, No Congested Regions.
|
|
East Dir 1x1 Area, Max Cong = 8.82353%, No Congested Regions.
|
|
West Dir 1x1 Area, Max Cong = 16.1765%, No Congested Regions.
|
|
|
|
------------------------------
|
|
Reporting congestion hotspots
|
|
------------------------------
|
|
Direction: North
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
Direction: South
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
Direction: East
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
Direction: West
|
|
----------------
|
|
Congested clusters found at Level 0
|
|
Effective congestion level: 0 Aspect Ratio: 1 Sparse Ratio: 0
|
|
|
|
Phase 7 Route finalize | Checksum: af31d432
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Phase 8 Verifying routed nets
|
|
|
|
Verification completed successfully
|
|
Phase 8 Verifying routed nets | Checksum: af31d432
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Phase 9 Depositing Routes
|
|
Phase 9 Depositing Routes | Checksum: 4b1641fa
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
INFO: [Route 35-16] Router Completed Successfully
|
|
|
|
Time (s): cpu = 00:00:28 ; elapsed = 00:00:23 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
|
|
Routing Is Done.
|
|
INFO: [Common 17-83] Releasing license: Implementation
|
|
49 Infos, 3 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
route_design completed successfully
|
|
route_design: Time (s): cpu = 00:00:30 ; elapsed = 00:00:30 . Memory (MB): peak = 1516.094 ; gain = 234.645
|
|
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 1516.094 ; gain = 0.000
|
|
WARNING: [Constraints 18-5210] No constraints selected for write.
|
|
Resolution: This message can indicate that there are no constraints for the design, or it can indicate that the used_in flags are set such that the constraints are ignored. This later case is used when running synth_design to not write synthesis constraints to the resulting checkpoint. Instead, project constraints are read when the synthesized design is opened.
|
|
Writing placer database...
|
|
Writing XDEF routing.
|
|
Writing XDEF routing logical nets.
|
|
Writing XDEF routing special nets.
|
|
Write XDEF Complete: Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.044 . Memory (MB): peak = 1516.094 ; gain = 0.000
|
|
INFO: [Common 17-1381] The checkpoint 'C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1/FetchUnit_routed.dcp' has been generated.
|
|
INFO: [runtcl-4] Executing : report_drc -file FetchUnit_drc_routed.rpt -pb FetchUnit_drc_routed.pb -rpx FetchUnit_drc_routed.rpx
|
|
Command: report_drc -file FetchUnit_drc_routed.rpt -pb FetchUnit_drc_routed.pb -rpx FetchUnit_drc_routed.rpx
|
|
INFO: [IP_Flow 19-1839] IP Catalog is up to date.
|
|
INFO: [DRC 23-27] Running DRC with 2 threads
|
|
INFO: [Coretcl 2-168] The results of DRC are in file C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1/FetchUnit_drc_routed.rpt.
|
|
report_drc completed successfully
|
|
INFO: [runtcl-4] Executing : report_methodology -file FetchUnit_methodology_drc_routed.rpt -pb FetchUnit_methodology_drc_routed.pb -rpx FetchUnit_methodology_drc_routed.rpx
|
|
Command: report_methodology -file FetchUnit_methodology_drc_routed.rpt -pb FetchUnit_methodology_drc_routed.pb -rpx FetchUnit_methodology_drc_routed.rpx
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
INFO: [DRC 23-133] Running Methodology with 2 threads
|
|
INFO: [Coretcl 2-1520] The results of Report Methodology are in file C:/Users/ecelab/ECE3570-Lab/lab2CA.runs/impl_1/FetchUnit_methodology_drc_routed.rpt.
|
|
report_methodology completed successfully
|
|
INFO: [runtcl-4] Executing : report_power -file FetchUnit_power_routed.rpt -pb FetchUnit_power_summary_routed.pb -rpx FetchUnit_power_routed.rpx
|
|
Command: report_power -file FetchUnit_power_routed.rpt -pb FetchUnit_power_summary_routed.pb -rpx FetchUnit_power_routed.rpx
|
|
WARNING: [Power 33-232] No user defined clocks were found in the design!
|
|
Resolution: Please specify clocks using create_clock/create_generated_clock for sequential elements. For pure combinatorial circuits, please specify a virtual clock, otherwise the vectorless estimation might be inaccurate
|
|
INFO: [Timing 38-35] Done setting XDC timing constraints.
|
|
Running Vector-less Activity Propagation...
|
|
|
|
Finished Running Vector-less Activity Propagation
|
|
60 Infos, 5 Warnings, 0 Critical Warnings and 0 Errors encountered.
|
|
report_power completed successfully
|
|
INFO: [runtcl-4] Executing : report_route_status -file FetchUnit_route_status.rpt -pb FetchUnit_route_status.pb
|
|
INFO: [runtcl-4] Executing : report_timing_summary -max_paths 10 -file FetchUnit_timing_summary_routed.rpt -pb FetchUnit_timing_summary_routed.pb -rpx FetchUnit_timing_summary_routed.rpx -warn_on_violation
|
|
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max.
|
|
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs
|
|
WARNING: [Timing 38-313] There are no user specified timing constraints. Timing constraints are needed for proper timing analysis.
|
|
INFO: [runtcl-4] Executing : report_incremental_reuse -file FetchUnit_incremental_reuse_routed.rpt
|
|
INFO: [Vivado_Tcl 4-1062] Incremental flow is disabled. No incremental reuse Info to report.
|
|
INFO: [runtcl-4] Executing : report_clock_utilization -file FetchUnit_clock_utilization_routed.rpt
|
|
INFO: [runtcl-4] Executing : report_bus_skew -warn_on_violation -file FetchUnit_bus_skew_routed.rpt -pb FetchUnit_bus_skew_routed.pb -rpx FetchUnit_bus_skew_routed.rpx
|
|
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -2L, Delay Type: min_max.
|
|
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 2 CPUs
|
|
INFO: [Common 17-206] Exiting Vivado at Wed Feb 20 11:37:30 2019...
|