Added documentation for boost

Hardware/!Hardware.markdown

@@ -4,6 +4,7 @@
 
 - @subpage designChoices
 - @subpage deviceSpecifications
+- @subpage powerDesign
 
 ---
 

Hardware/Power Design.markdown

@@ -0,0 +1,33 @@
+@page powerDesign Power Design 
+
+# Boost
+
+## LTSpice Simulations
+
+* The LTSpice circuit includes input and output resistors for input and output power calculations
+* An RC circuit can be added at the input for time-delay for output capacitor charging
+* Output power = (16V)(2A(max))=32 Watts
+* Input power = (12V)(Max FET current). Max FET current should be 2-3x the desired output current
+* Rsense = Vsense(min)/IL(max). Vsense is given in LT1619 Datasheet: 40mV(min). For IL, we are using max FET current
+  * For Rsense, a smaller R value gives less output ripple voltage in simulation. 
+  * Rsense is basically setting the current through the FET
+* Voltage divider equation can be found in datasheet for LT1619
+
+## Altium
+
+* Inductor is 10uH MSS1210-103MEB. Dr. Bazuin suggested its use as Sunseeker has lots of them
+
+* Replaced the SI9804DY FET (used in LTSpice) with the FDS6680A as the SI is obsolete
+
+* Replaced the MBR735 Schottky (used in LTSpice) with the MBRD835LT4G because 735 is not surface mount
+
+  
+
+# Buck
+
+
+
+*asd*
+
+**asd**
+