William/Senior-Design-Project_WMU-Sunseeker_Altium-Designer
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
2da5a030ffb30db23904e2f8a240b3631fa69a1c
Senior-Design-Project_WMU-S…/Hardware/AltiumProject/2020-2021 Telemetry and Lighting Board/Project Logs for 2020-2021 Telemetry and Lighting Board
History
Stephen 2da5a030ff Added ground to C74 on buck.
2021-04-05 16:06:55 -04:00
..
3 4-5-2021 3-53-07 PM.LOG
Added 3.3v to main schematic, added CANV and 3.3v nodes. Updated Power PCB
2021-04-05 15:59:54 -04:00
Boost Converter (Thermal Pad) SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
Boost Converter (Thermal Pad) SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Boost Converter SCH ECO 3-11-2021 7-30-05 PM.LOG
Added +16V port, changed Diode for Boost Converter
2021-03-12 15:48:04 -05:00
Boost Converter SCH ECO 3-11-2021 10-40-05 PM.LOG
Added TPS61378-Q1 footprint to Altium, reworking Boost Converter. Deleted Boost PCB.
2021-03-12 15:48:36 -05:00
Boost Converter SCH ECO 3-12-2021 2-56-28 PM.LOG
More changes to boost converter
2021-03-12 15:49:35 -05:00
Boost Converter SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Boost Converter SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Boost Converter SCH ECO 3-13-2021 12-30-52 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus SCH ECO 2-1-2021 8-11-58 PM.LOG
The CANbus modules are about 98% done!
2021-02-02 00:50:27 -05:00
CANbus SCH ECO 2-1-2021 9-33-45 PM.LOG
The CANbus modules are about 98% done!
2021-02-02 00:50:27 -05:00
CANbus SCH ECO 2-2-2021 1-05-32 AM.LOG
Added forgotten diode on CANbus Controller
2021-02-02 01:07:53 -05:00
CANbus SCH ECO 2-2-2021 12-15-33 AM.LOG
The CANbus modules are about 98% done!
2021-02-02 00:50:27 -05:00
CANbus SCH ECO 2-6-2021 9-42-44 PM.LOG
CANbus Modules are now connected
2021-02-06 23:26:55 -05:00
CANbus SCH ECO 2-25-2021 5-47-16 PM.LOG
Annotations update
2021-02-25 17:48:40 -05:00
CANbus SCH ECO 3-6-2021 4-59-57 PM.LOG
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
CANbus SCH ECO 3-6-2021 5-04-53 PM.LOG
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
CANbus SCH ECO 3-6-2021 11-52-45 PM.LOG
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
CANbus SCH ECO 3-8-2021 1-50-50 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
CANbus SCH ECO 3-8-2021 3-26-26 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
CANbus SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus SCH ECO 3-12-2021 8-53-03 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus SCH ECO 3-12-2021 8-59-59 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
CANbus SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus SCH ECO 3-13-2021 2-40-25 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
CANbus SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
CANbus SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
CANbus SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
CANbus SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Connection Swap (2x2) SCH ECO 2-8-2021 7-05-37 PM.LOG
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
DC-DC SMPS SCH ECO 2-25-2021 5-47-16 PM.LOG
Annotations update
2021-02-25 17:48:40 -05:00
DC-DC SMPS SCH ECO 3-1-2021 2-31-29 PM.LOG
Added Current Source to Boost Converter, added brief notes to LM5141
2021-03-01 14:36:12 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-7-2021 9-27-58 PM.LOG
Finished changing Harnesses; Updated annotations for ICs
2021-02-07 21:30:06 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-19-2021 5-12-26 PM.LOG
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-19-2021 8-56-46 PM.LOG
ESP32 configuration in progress
2021-02-19 21:25:40 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-19-2021 9-06-44 PM.LOG
ESP32 configuration in progress
2021-02-19 21:25:40 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-19-2021 9-50-27 PM.LOG
Added resistor to prevent short-circuit and notes...
2021-02-19 21:51:32 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-20-2021 1-55-04 PM.LOG
Added more notes
2021-02-20 13:55:24 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-20-2021 3-08-15 PM.LOG
Added JTAG Headers to ESP32
2021-02-20 15:10:52 -05:00
ESP32 Bluetooth-WiFi SCH ECO 2-20-2021 5-27-55 PM.LOG
GPS Receiver now has isolated USB interface available
2021-02-20 17:54:57 -05:00
ESP32 Bluetooth-WiFi SCH ECO 3-8-2021 2-03-15 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi SCH ECO 3-8-2021 2-04-19 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi SCH ECO 3-8-2021 3-08-36 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
ESP32 Bluetooth-WiFi SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
ESP32 Bluetooth-WiFi SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
ESP32 Bluetooth-WiFi SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
ESP32 Bluetooth-WiFi SCH ECO 3-15-2021 7-43-21 PM.LOG
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
ESP32 Bluetooth-WiFi SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
ESP32 Bluetooth-WiFi SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
ESP32 Bluetooth-WiFi SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
ESP32 Bluetooth-WiFi SCH ECO 3-20-2021 9-20-40 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
ESP32 Bluetooth-WiFi SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
ESP32_USB UART Bridge SCH ECO 2-20-2021 3-03-00 PM.LOG
Library Maintenance; Removed old GPS Receiver; Added 4x1 Header Pins
2021-02-20 15:04:12 -05:00
ESP32_USB UART Bridge SCH ECO 3-8-2021 8-20-33 PM.LOG
All telemetry and lighting schematics have real components now and no longer generics; Moving onto working on the PCB Layout
2021-03-08 20:23:36 -05:00
ESP_USB UART Bridge SCH ECO 2-19-2021 5-12-49 PM.LOG
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP_USB UART Bridge SCH ECO 2-19-2021 5-14-05 PM.LOG
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
ESP_USB UART Bridge SCH ECO 2-19-2021 5-30-42 PM.LOG
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
GPS Receiver SCH ECO 2-7-2021 9-28-45 PM.LOG
Finished changing Harnesses; Updated annotations for ICs
2021-02-07 21:30:06 -05:00
GPS Receiver SCH ECO 2-13-2021 8-45-53 PM.LOG
GPS Receiver is too complicated for us to quickly get into and made work at the moment
2021-02-13 20:59:10 -05:00
GPS Receiver SCH ECO 2-16-2021 8-44-14 PM.LOG
Visual adjustment on Main; added only the main part for GPS
2021-02-16 21:34:45 -05:00
GPS Receiver SCH ECO 2-20-2021 5-27-55 PM.LOG
GPS Receiver now has isolated USB interface available
2021-02-20 17:54:57 -05:00
GPS Receiver SCH ECO 2-20-2021 5-52-26 PM.LOG
GPS Receiver now has isolated USB interface available
2021-02-20 17:54:57 -05:00
GPS Receiver SCH ECO 2-20-2021 8-12-07 PM.LOG
GPS Receiver is finished!
2021-02-20 21:32:20 -05:00
GPS Receiver SCH ECO 2-20-2021 9-19-54 PM.LOG
GPS Receiver is finished!
2021-02-20 21:32:20 -05:00
GPS Receiver SCH ECO 3-8-2021 1-43-07 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver SCH ECO 3-8-2021 1-53-03 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver SCH ECO 3-8-2021 3-26-26 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
GPS Receiver SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
GPS Receiver SCH ECO 3-12-2021 8-55-23 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
GPS Receiver SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
GPS Receiver SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
GPS Receiver SCH ECO 3-13-2021 2-47-07 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
GPS Receiver SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
GPS Receiver SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
GPS Receiver SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
GPS Receiver SCH ECO 3-20-2021 9-20-40 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
GPS Receiver SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Inertial Measurement Unit SCH ECO 2-7-2021 9-28-45 PM.LOG
Finished changing Harnesses; Updated annotations for ICs
2021-02-07 21:30:06 -05:00
Inertial Measurement Unit SCH ECO 2-7-2021 11-25-14 PM.LOG
Inertial Measurement Unit most likely finished
2021-02-07 23:26:10 -05:00
Inertial Measurement Unit SCH ECO 2-13-2021 10-52-34 PM.LOG
RTC is done; IMU needed voltage translator for I2C; Made some library edits
2021-02-13 22:59:26 -05:00
Inertial Measurement Unit SCH ECO 2-16-2021 8-44-14 PM.LOG
IMU is now finished, again...
2021-02-16 21:31:24 -05:00
Inertial Measurement Unit SCH ECO 2-16-2021 9-30-38 PM.LOG
IMU is now finished, again...
2021-02-16 21:31:24 -05:00
Inertial Measurement Unit SCH ECO 3-6-2021 10-39-55 PM.LOG
IMU is now fully complete, with it's own LDO Regulator, Voltage-Level Shifters and real parts specified
2021-03-06 22:46:32 -05:00
Inertial Measurement Unit SCH ECO 3-6-2021 10-49-40 PM.LOG
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Inertial Measurement Unit SCH ECO 3-8-2021 1-54-17 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Inertial Measurement Unit SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Inertial Measurement Unit SCH ECO 3-12-2021 8-57-04 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Inertial Measurement Unit SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Inertial Measurement Unit SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Inertial Measurement Unit SCH ECO 3-15-2021 8-17-37 PM.LOG
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
Inertial Measurement Unit SCH ECO 3-15-2021 9-48-13 PM.LOG
Finished all changed mentioned by Dr. Bazuin
2021-03-15 22:47:39 -04:00
Inertial Measurement Unit SCH ECO 3-15-2021 10-05-12 PM.LOG
Finished all changed mentioned by Dr. Bazuin
2021-03-15 22:47:39 -04:00
Inertial Measurement Unit SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
Inertial Measurement Unit SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
Inertial Measurement Unit SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
Inertial Measurement Unit SCH ECO 3-20-2021 9-20-40 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
Inertial Measurement Unit SCH ECO 3-31-2021 2-17-50 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Inertial Measurement Unit SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Lighting SCH ECO 2-8-2021 7-05-37 PM.LOG
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
Lighting SCH ECO 2-10-2021 5-05-07 PM.LOG
Removed connection swap schematic and just made a custom part
2021-02-10 17:06:21 -05:00
Lighting SCH ECO 2-15-2021 12-38-56 AM.LOG
Added MOSFET and Connector components for Lighting; Light board also finished
2021-02-15 00:43:50 -05:00
Lighting SCH ECO 3-2-2021 10-31-30 PM.LOG
Changed out P-Channel MOSFETs used for switching lights to more efficient models and added their symbol/footprint/model: PSMN9R5-30YLC,115
2021-03-02 22:33:28 -05:00
Lighting SCH ECO 3-8-2021 3-12-45 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Lighting SCH ECO 3-8-2021 3-32-31 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Lighting SCH ECO 3-12-2021 6-47-13 PM.LOG
Modified ordering of Lighting components to make PCB Layout simpler and be able to have a more compact design.
2021-03-12 18:49:14 -05:00
Lighting SCH ECO 3-12-2021 10-50-14 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Lighting SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Lighting SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Lighting SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
Lighting SCH ECO 3-20-2021 9-29-20 PM.LOG
Lighting - connectors and fuses swapped for short circuit prevention
2021-03-20 21:29:55 -04:00
Lighting SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
LM5141RGER SCH ECO 3-1-2021 2-31-29 PM.LOG
Added Current Source to Boost Converter, added brief notes to LM5141
2021-03-01 14:36:12 -05:00
LM5141RGER SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
LM5141RGER SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
LM5141RGER SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
LM5141RGER SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
LT1619 Boost Converter v2 SCH ECO 3-20-2021 7-41-52 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
LT1619 Boost Converter v2 SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
LT1619 Boost Converter v2 SCH ECO 3-31-2021 2-17-50 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
LT1619 Boost Converter v2 SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
LT1619 Boost Converter v2 SCH ECO 4-2-2021 7-38-39 PM.LOG
Added correct 10uH inductor to schematic. Added "real" R to Schematic and PCB.
2021-04-02 20:19:08 -04:00
LT1619 Boost Converter v2 SCH ECO 4-2-2021 8-12-56 PM.LOG
Added correct 10uH inductor to schematic. Added "real" R to Schematic and PCB.
2021-04-02 20:19:08 -04:00
Main SCH ECO 1-31-2021 10-40-00 PM.LOG
Added annotations to some capacitors
2021-01-31 22:41:47 -05:00
Main SCH ECO 1-31-2021 10-40-33 PM.LOG
Added annotations to some capacitors
2021-01-31 22:41:47 -05:00
Main SCH ECO 1-31-2021 12-07-40 AM.LOG
JTAG was getting a bit busy, so I made a separate schematic for it
2021-01-31 00:12:41 -05:00
Main SCH ECO 2-1-2021 3-31-14 PM.LOG
Added back capacitors to Universal Clock System
2021-02-01 15:31:55 -05:00
Main SCH ECO 2-6-2021 9-42-44 PM.LOG
CANbus Modules are now connected
2021-02-06 23:26:55 -05:00
Main SCH ECO 2-25-2021 5-47-16 PM.LOG
Annotations update
2021-02-25 17:48:40 -05:00
Main SCH ECO 2-25-2021 5-48-10 PM.LOG
Annotations update
2021-02-25 17:48:40 -05:00
Main SCH ECO 2-28-2021 10-02-40 PM.LOG
Moved supercapacitor to main schematic
2021-02-28 22:06:23 -05:00
Main SCH ECO 3-1-2021 1-14-24 PM.LOG
Replaced GP Switch, and annotated
2021-03-01 13:15:09 -05:00
Main SCH ECO 3-1-2021 4-06-31 PM.LOG
Modified general purpose switch
2021-03-01 16:07:19 -05:00
Main SCH ECO 3-1-2021 12-21-03 AM.LOG
Added generic components for LEDs until Sunseeker's component inventory is completed to see if we can use existing components
2021-03-01 00:22:46 -05:00
Main SCH ECO 3-2-2021 11-51-45 PM.LOG
Status LEDs are complete, with specific parts chosen
2021-03-02 23:57:15 -05:00
Main SCH ECO 3-3-2021 11-54-57 PM.LOG
General-Purpose Button has all parts specified now, with right-angle button
2021-03-04 00:32:55 -05:00
Main SCH ECO 3-4-2021 12-44-12 AM.LOG
Added test points for clock frequencies of the MCU
2021-03-04 00:45:05 -05:00
Main SCH ECO 3-4-2021 12-50-22 AM.LOG
Swapping out CANbus transceiver - in progress
2021-03-04 00:58:38 -05:00
Main SCH ECO 3-6-2021 5-04-53 PM.LOG
Moving all interrupt signals from peripheral devices to Port 1 and Port 2, since only those have interrupt capabilities [IN PROGRESS]
2021-03-06 20:09:50 -05:00
Main SCH ECO 3-8-2021 1-43-07 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main SCH ECO 3-8-2021 1-47-21 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main SCH ECO 3-8-2021 2-55-09 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Main SCH ECO 3-11-2021 7-30-05 PM.LOG
Added +16V port, changed Diode for Boost Converter
2021-03-12 15:48:04 -05:00
Main SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Main SCH ECO 3-12-2021 10-50-14 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main SCH ECO 3-13-2021 1-29-07 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main SCH ECO 3-13-2021 12-30-52 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Main SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
Main SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
Main SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
Main SCH ECO 3-20-2021 9-20-40 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
Main SCH ECO 3-21-2021 12-42-30 AM.LOG
Changed one crystal; working on PCB Layout
2021-03-21 01:44:41 -04:00
Main SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
MCU_JTAG SCH ECO 1-31-2021 12-07-40 AM.LOG
JTAG was getting a bit busy, so I made a separate schematic for it
2021-01-31 00:12:41 -05:00
MCU_JTAG SCH ECO 2-1-2021 3-31-14 PM.LOG
Added back capacitors to Universal Clock System
2021-02-01 15:31:55 -05:00
MCU_JTAG SCH ECO 3-1-2021 12-30-38 AM.LOG
Added diode to VCC_TOOL power source
2021-03-01 00:32:52 -05:00
MCU_JTAG SCH ECO 3-4-2021 12-29-40 AM.LOG
All parts specified now
2021-03-04 00:33:46 -05:00
MCU_JTAG SCH ECO 3-4-2021 12-36-32 AM.LOG
Changed MCU reset button to be right-angled to be pressed from outside the enclosure.
2021-03-04 00:37:11 -05:00
MCU_JTAG SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_JTAG SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_JTAG SCH ECO 3-13-2021 1-29-07 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_JTAG SCH ECO 3-20-2021 7-41-52 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
MCU_JTAG SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
MCU_JTAG SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
MCU_Power SCH ECO 2-13-2021 2-56-39 PM.LOG
MCU power now has it's own schematic
2021-02-13 15:05:04 -05:00
MCU_Power SCH ECO 2-13-2021 3-03-55 PM.LOG
MCU power now has it's own schematic
2021-02-13 15:05:04 -05:00
MCU_Power SCH ECO 3-6-2021 5-04-53 PM.LOG
Swapped generic parts with real ones
2021-03-06 20:03:07 -05:00
MCU_Power SCH ECO 3-6-2021 5-26-06 PM.LOG
Swapped generic parts with real ones
2021-03-06 20:03:07 -05:00
MCU_Power SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
MCU_Power SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_Power SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
MCU_Power SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
MCU_Power SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
MCU_Power SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Real-Time Clock SCH ECO 2-7-2021 9-28-45 PM.LOG
Finished changing Harnesses; Updated annotations for ICs
2021-02-07 21:30:06 -05:00
Real-Time Clock SCH ECO 2-13-2021 10-52-34 PM.LOG
RTC is done; IMU needed voltage translator for I2C; Made some library edits
2021-02-13 22:59:26 -05:00
Real-Time Clock SCH ECO 2-19-2021 5-12-26 PM.LOG
Added USB to UART schematic with vertical connector for ESP32 for programming
2021-02-19 17:33:03 -05:00
Real-Time Clock SCH ECO 3-6-2021 10-49-40 PM.LOG
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Real-Time Clock SCH ECO 3-6-2021 11-05-16 PM.LOG
Specifying real components in place of generics
2021-03-06 23:56:13 -05:00
Real-Time Clock SCH ECO 3-8-2021 1-55-15 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
Real-Time Clock SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Real-Time Clock SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Real-Time Clock SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
Real-Time Clock SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
Real-Time Clock SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
Real-Time Clock SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
Real-Time Clock SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
RS-232 Transceiver SCH ECO 2-7-2021 9-26-27 PM.LOG
Finished changing Harnesses; Updated annotations for ICs
2021-02-07 21:30:06 -05:00
RS-232 Transceiver SCH ECO 2-8-2021 12-19-31 AM.LOG
RS-232 Module is nearly finished; need DB9 connection
2021-02-08 00:23:54 -05:00
RS-232 Transceiver SCH ECO 2-10-2021 5-05-07 PM.LOG
Removed connection swap schematic and just made a custom part
2021-02-10 17:06:21 -05:00
RS-232 Transceiver SCH ECO 2-13-2021 3-41-07 PM.LOG
Added more info to 2x2 Header Pins schematic
2021-02-13 15:41:39 -05:00
RS-232 Transceiver SCH ECO 2-20-2021 3-03-00 PM.LOG
Library Maintenance; Removed old GPS Receiver; Added 4x1 Header Pins
2021-02-20 15:04:12 -05:00
RS-232 Transceiver SCH ECO 3-6-2021 6-09-42 PM.LOG
Changed RS-232 Transceiver to a Maxim Integrated MAX3232EUE+, since it can run on only 3.3V instead of needing 5V
2021-03-06 20:05:13 -05:00
RS-232 Transceiver SCH ECO 3-8-2021 1-52-22 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
RS-232 Transceiver SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
RS-232 Transceiver SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
RS-232 Transceiver SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
RS-232 Transceiver SCH ECO 3-13-2021 1-29-07 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
RS-232 Transceiver SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
RS-232 Transceiver SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
RS-232 Transceiver SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
RS-232 Transceiver SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
SD Card SCH ECO 2-13-2021 2-41-43 PM.LOG
SD Card connection is finished
2021-02-13 14:43:04 -05:00
SD Card SCH ECO 3-8-2021 3-01-46 AM.LOG
Many small changes and fixes; Only generic parts with telemetry and lighting are the USB-UART Bridges
2021-03-08 03:49:29 -05:00
SD Card SCH ECO 3-12-2021 8-30-43 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
SD Card SCH ECO 3-12-2021 8-54-20 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
SD Card SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
SD Card SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
SD Card SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
SD Card SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
SD Card SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
SD Card SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Stage 1 - Power PCB ECO 4-1-2021 9-13-33 PM.LOG
Added changes to Power PCB. Added notes to Boost. Placed Boost and Buck into main
2021-04-01 22:18:34 -04:00
Stage 1 - Power PCB ECO 4-2-2021 7-37-46 PM.LOG
Added correct 10uH inductor to schematic. Added "real" R to Schematic and PCB.
2021-04-02 20:19:08 -04:00
Stage 1 - Power PCB ECO 4-2-2021 7-38-53 PM.LOG
Added correct 10uH inductor to schematic. Added "real" R to Schematic and PCB.
2021-04-02 20:19:08 -04:00
Stage 1 - Power PCB ECO 4-2-2021 8-15-14 PM.LOG
Added correct 10uH inductor to schematic. Added "real" R to Schematic and PCB.
2021-04-02 20:19:08 -04:00
Stage 1 - Power PCB ECO 4-5-2021 3-55-25 PM.LOG
Added 3.3v to main schematic, added CANV and 3.3v nodes. Updated Power PCB
2021-04-05 15:59:54 -04:00
Stage 1 - Power PCB ECO 4-5-2021 4-05-12 PM.LOG
Added ground to C74 on buck.
2021-04-05 16:06:55 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-8-2021 8-44-13 PM.LOG
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-8-2021 9-48-23 PM.LOG
Working on the PCB Layout; Lighting section is nearly done, will wait until approval before making traces
2021-03-08 23:10:43 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-12-2021 6-47-52 PM.LOG
Modified ordering of Lighting components to make PCB Layout simpler and be able to have a more compact design.
2021-03-12 18:49:14 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-12-2021 6-52-09 PM.LOG
Condensing Lighting PCB design
2021-03-12 18:54:29 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-12-2021 7-13-32 PM.LOG
Updated symbols and footprints to remove designators, as it's done automatically, and added supplier links
2021-03-12 19:16:40 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-12-2021 8-44-06 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-13-2021 9-24-33 PM.LOG
Working on PCB Layout for Telemetry and Lighting
2021-03-13 22:40:20 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-13-2021 9-26-25 PM.LOG
Working on PCB Layout for Telemetry and Lighting
2021-03-13 22:40:20 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-13-2021 9-27-14 PM.LOG
Working on PCB Layout for Telemetry and Lighting
2021-03-13 22:40:20 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-13-2021 9-28-28 PM.LOG
Working on PCB Layout for Telemetry and Lighting
2021-03-13 22:40:20 -05:00
Stage 1 - Telemetry And Lighting PCB ECO 3-15-2021 11-02-32 PM.LOG
PCB Layout work
2021-03-15 23:43:09 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-20-2021 9-42-28 PM.LOG
Changed one crystal; working on PCB Layout
2021-03-21 01:44:41 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-20-2021 9-44-38 PM.LOG
Changed one crystal; working on PCB Layout
2021-03-21 01:44:41 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-21-2021 12-16-20 AM.LOG
Changed one crystal; working on PCB Layout
2021-03-21 01:44:41 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-21-2021 12-20-12 AM.LOG
Changed one crystal; working on PCB Layout
2021-03-21 01:44:41 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-21-2021 12-20-49 AM.LOG
Changed one crystal; working on PCB Layout
2021-03-21 01:44:41 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-21-2021 12-42-56 AM.LOG
Changed one crystal; working on PCB Layout
2021-03-21 01:44:41 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-29-2021 7-49-57 PM.LOG
MCU bypass capacitors and crystals now connected with proper fanout of MCU signals
2021-03-29 20:01:50 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-30-2021 4-26-46 PM.LOG
More work on CANbus, lighting; JTAG finished; fixed small vias
2021-03-30 16:40:55 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-30-2021 6-41-56 PM.LOG
UART-USB Bridges and RS-232 Transceiver in PCB Layout is complete
2021-03-30 19:17:22 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-30-2021 8-43-00 PM.LOG
GPS Receiver layout completed
2021-03-30 21:32:34 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-30-2021 8-44-20 PM.LOG
GPS Receiver layout completed
2021-03-30 21:32:34 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-30-2021 8-44-46 PM.LOG
GPS Receiver layout completed
2021-03-30 21:32:34 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-30-2021 10-34-20 PM.LOG
All sections except IMU and MCU reset button complete
2021-03-30 23:23:58 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-31-2021 2-19-01 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-31-2021 2-25-47 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 3-31-2021 2-28-32 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Stage 1 - Telemetry And Lighting PCB ECO 4-3-2021 11-33-25 PM.LOG
MCU section, Lighting connections and JTAG connector have been re-condensed
2021-04-04 00:03:19 -04:00
SuperCapacitor SCH ECO 2-25-2021 5-47-16 PM.LOG
Annotations update
2021-02-25 17:48:40 -05:00
USB UART Bridge SCH ECO 2-7-2021 9-26-27 PM.LOG
Finished changing Harnesses; Updated annotations for ICs
2021-02-07 21:30:06 -05:00
USB UART Bridge SCH ECO 2-8-2021 7-05-37 PM.LOG
Added connection swapper to have 2x2 header pins be connected via a jumper
2021-02-08 19:08:15 -05:00
USB UART Bridge SCH ECO 2-8-2021 7-45-32 PM.LOG
Nearly finished with USB Bridge. Also found good connector!
2021-02-08 19:56:29 -05:00
USB UART Bridge SCH ECO 2-10-2021 5-05-07 PM.LOG
Removed connection swap schematic and just made a custom part
2021-02-10 17:06:21 -05:00
USB UART Bridge SCH ECO 2-13-2021 3-41-07 PM.LOG
Added more info to 2x2 Header Pins schematic
2021-02-13 15:41:39 -05:00
USB UART Bridge SCH ECO 2-16-2021 8-44-14 PM.LOG
Updated annotations
2021-02-16 20:45:31 -05:00
USB UART Bridge SCH ECO 2-20-2021 3-03-00 PM.LOG
Library Maintenance; Removed old GPS Receiver; Added 4x1 Header Pins
2021-02-20 15:04:12 -05:00
USB UART Bridge SCH ECO 3-8-2021 8-17-50 PM.LOG
All telemetry and lighting schematics have real components now and no longer generics; Moving onto working on the PCB Layout
2021-03-08 20:23:36 -05:00
USB UART Bridge SCH ECO 3-12-2021 8-38-53 PM.LOG
All capacitors now X7R temperature rated, at least 0805 sized or larger; Chip Selects of SPI interfaces now all connected again to assist with debugging; Added bypass capacitors to SD Card socket and GPS Receiver; Designator names shortened to make silkscreen names shorter; Fixed locations of test points to be more useful;
2021-03-12 21:01:33 -05:00
USB UART Bridge SCH ECO 3-12-2021 10-50-30 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge SCH ECO 3-12-2021 10-50-37 PM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge SCH ECO 3-13-2021 2-40-25 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge SCH ECO 3-13-2021 12-35-46 AM.LOG
Many changes and additions. Implemented most everything Dr. Bazuin pointed-out so far. Altium basically stopped working, where I can no longer search for parts, so I'm stopping for today.
2021-03-13 03:13:03 -05:00
USB UART Bridge SCH ECO 3-15-2021 7-43-21 PM.LOG
Removing FETs on Inertial Measurement Unit
2021-03-15 20:19:47 -04:00
USB UART Bridge SCH ECO 3-20-2021 7-42-57 PM.LOG
Updated JTAG header on schematics; Updated all components on all schematic sheets
2021-03-20 19:43:52 -04:00
USB UART Bridge SCH ECO 3-20-2021 8-23-59 PM.LOG
Updated schematics with new test points and USB Connectors
2021-03-20 20:25:12 -04:00
USB UART Bridge SCH ECO 3-20-2021 9-01-36 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
USB UART Bridge SCH ECO 3-20-2021 9-20-40 PM.LOG
Made generic 1206 capacitor; All capacitors and resistors are now sized at 1206
2021-03-20 21:21:55 -04:00
USB UART Bridge SCH ECO 3-31-2021 2-27-39 PM.LOG
Created modified ICM-20948 footprint and updated all components on all sheets
2021-03-31 14:31:40 -04:00
Voltage-Level Translator [I2C][3 2-15-2021 12-38-56 AM.LOG
Added MOSFET and Connector components for Lighting; Light board also finished
2021-02-15 00:43:50 -05:00
Voltage-Level Translator [Push-Pull][3 2-15-2021 12-38-56 AM.LOG
Added MOSFET and Connector components for Lighting; Light board also finished
2021-02-15 00:43:50 -05:00
Voltage-Level Translator [Push-Pull][3 3-6-2021 5-00-07 PM.LOG
Voltage translators no longer needed, thankfully
2021-03-06 20:07:37 -05:00